论文信息 - Research on Workspace of Masticatory Bionic Robot Based on the 3/3-RRRS Parallel Manipulator

Research on Workspace of Masticatory Bionic Robot Based on the 3/3-RRRS Parallel Manipulator

masticatory movement of mankind is a very complicated process of food processing. In order to research the mechanism of masticatory,firstly, a bionic robot must be designed to achieve chin’s multi-degree of freedom motion and chewing. By 3/3-RRRS parallel mechanism driving teeth up and down, it achieved full chewing of food. The study of this article is done in the condition of each given attitude and location of the moving platform, using the method of the three dimensional boundary search for location workspace. Through the research on workspace, it can be used to analyze the change law of workspace, and provide a theoretical basis for chewing bionic robot’s design with specific chewing campaign parameters.

Hui Zhou | Yi Cao | Jing Hu Yu | Xiao Feng Li

[1] A. B. Koteswara Rao,et al. Workspace and dexterity analyses of hexaslide machine tools , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[2] C. Gosselin,et al. Determination of maximal singularity-free zones in the workspace of planar three-degree-of-freedom parallel mechanisms , 2006 .

[3] Jeha Ryu,et al. Orientation workspace analysis of 6-DOF parallel manipulators , 1999 .

[4] Y. L. Yao,et al. Workspace Analysis of a Six-Degrees of Freedom, Three-Prismatic- Prismatic-Spheric-Revolute Parallel Manipulator , 2000 .

[5] Raffaele Di Gregorio,et al. Workspace analytic determination of two similar translational parallel manipulators , 2003, Robotica.

[6] Adam Jacoff,et al. Design and workspace analysis of a 6-6 cable-suspended parallel robot , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[7] Jian Wang,et al. Workspace evaluation of Stewart platforms , 1994, Adv. Robotics.