Bulk forming of sheet metal

[1]  Bernd-Arno Behrens,et al.  Development of a Hydraulic Actuator to Superimpose Oscillation in Metal-Forming Presses , 2011 .

[2]  K. Osakada,et al.  Plate forging of tailored blanks having local thickening for deep drawing of square cups , 2011 .

[3]  Berend Denkena,et al.  Mechatronic Systems for Machine Tools , 2007 .

[4]  Jinn Jong Sheu,et al.  The Cold Orbital Forging Die and Process Design of a Hollow-ring Gear Part , 2007 .

[5]  Paulo A.F. Martins,et al.  Friction in bulk metal forming: a general friction model vs. the law of constant friction , 1997 .

[6]  Alexandre Ern,et al.  A Posteriori Control of Modeling Errors and Discretization Errors , 2003, Multiscale Model. Simul..

[7]  Andreas Schröder,et al.  Goal-oriented error control in adaptive mixed FEM for Signorini's Problem , 2011 .

[8]  Johannes Weickmann,et al.  Model and simulation of fringe projection measurements as part of an assistance system for multi-component fringe projection sensors , 2008, Optical Systems Design.

[9]  Sandro Wartzack,et al.  Improved Sheet Bulk Metal Forming Processes by Local Adjustment of Tribological Properties , 2011 .

[10]  G. Widera,et al.  Handbook of Metal Forming , 1985 .

[11]  Shi-Hong Zhang,et al.  3D rigid-plastic FEM numerical simulation on tube spinning , 2001 .

[12]  Jie Zhou,et al.  A Research on Steel Synchronizer Gear Ring's Precision Forging , 2008 .

[13]  A. H. van den Boogaard,et al.  A plane stress yield function for anisotropic sheet material by interpolation of biaxial stress states , 2006 .

[14]  Bernd-Arno Behrens,et al.  Characterization of Horizontal Loads in the Production of Asymmetrical Parts , 2011 .

[15]  Zhong-jin Wang,et al.  Explanation of the mushroom effect in the rotary forging of a cylinder , 2004 .

[16]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[17]  X. Y. Wang,et al.  Stamping–forging hybrid forming of double layer cup with different wall thicknesses , 2011 .

[18]  Joachim Danckert,et al.  Reduction of the Residual Stresses in a Deep-Drawn Cup by Modifying the Draw Die Profile , 1995 .

[19]  David Fritsche,et al.  Application and modelling of flow forming manufacturing processes for internally geared wheels , 2006 .

[20]  Peter Groche,et al.  Hydrodynamic effects of macroscopic deterministic surface structures in cold forging processes , 2009 .

[21]  J. Oden,et al.  A Posteriori Error Estimation in Finite Element Analysis , 2000 .

[22]  Dorel Banabic,et al.  Bulge Testing under Constant and Variable Strain Rates of Superplastic Aluminium Alloys , 2005 .

[23]  J. Oden,et al.  A Posteriori Error Estimation in Finite Element Analysis: Oden/A Posteriori , 2000 .

[24]  Peter Torben Tang,et al.  A new lubricant carrier for metal forming , 2009 .

[25]  Numerical simulation of friction in metal forming using a halfspace model , 2011 .

[26]  Rolf Rannacher,et al.  An optimal control approach to a posteriori error estimation in finite element methods , 2001, Acta Numerica.

[27]  Ulf Engel,et al.  Microforming—from basic research to its realization , 2002 .

[28]  J. Vižintin,et al.  Low-friction behaviour of boundary-lubricated diamond-like carbon coatings containing tungsten , 2005 .

[29]  Marion Merklein,et al.  Manufacturing of complex functional components with variants by using a new metal forming process – sheet-bulk metal forming , 2010 .

[30]  Niels Bay,et al.  The State of the Art in Cold Forging Lubrication , 1994 .

[31]  T. Wierzbicki,et al.  On fracture locus in the equivalent strain and stress triaxiality space , 2004 .

[32]  R. Hill.  A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[33]  Hiroshi Ike,et al.  Surface deformation vs. bulk plastic deformation—a key for microscopic control of surfaces in metal forming , 2003 .

[34]  A posteriori control of modelling errors in linear elasticity , 2010 .

[35]  Joachim Danckert,et al.  The Residual Stress Distribution in the Wall of a Deep-Drawn and Ironed Cup Determined Experimentally and by FEM , 1994 .

[36]  Peter Groche,et al.  Environmentally benign tribo-systems for metal forming , 2010 .

[37]  Ken-ichiro Mori,et al.  Application of Servo Presses to Sheet Metal Forming , 2011 .

[38]  Eduard Reithmeier,et al.  Endoscopic geometry inspection by modular fiber optic sensors with increased depth of focus , 2011, Optical Metrology.

[39]  Kozo Osakada,et al.  Reduction of friction in compression of plates by load pulsation , 2011 .

[40]  Julian M. Allwood,et al.  Sustainable Materials - With Both Eyes Open , 2012 .

[41]  K. Hayashi.  Tool Engineering for Fineblanking and Sheet Metal Forging Complex Work , 2006 .

[42]  K. Mori,et al.  Increase of Wall Thickness around Corner of Multi-Stage Drawn Cup with Flange Using Conical Punches , 2007 .

[43]  Eduard Reithmeier,et al.  Holistic Measurement in the Sheet-Bulk Metal Forming Process with Fringe Projection , 2012 .

[44]  M. S. Yong,et al.  Cold rotary forming of thin-wall component from flat-disc blank , 2008 .

[45]  Joachim Danckert,et al.  Ironing of thin walled cans , 2001 .

[46]  S. Ohnimus,et al.  Anisotropic discretization- and model-error estimation in solid mechanics by local Neumann problems , 1999 .

[47]  Michiharu Yokoi.  Development of Steel Plate Press Forming Technology and Its Practical Utilization Cases , 2010 .

[48]  A. Weckenmann,et al.  Function-oriented characterisation for surface metrology , 2011 .

[49]  S. Nishino,et al.  Plate Forging Technology by Press Forming , 2010 .

[50]  Philip D. Rufe.  Fundamentals of manufacturing , 2002 .

[51]  Xinghui Han,et al.  Comparison between cold rotary forging and conventional forging , 2009 .

[52]  Dirk Biermann,et al.  Manufacturing of dies from hardened tool steels by 3-axis micromilling , 2011, Prod. Eng..

[53]  Xiangqian Jiang,et al.  Multisensor data fusion in dimensional metrology , 2009 .

[54]  Bernd-Arno Behrens,et al.  Closed-Loop-Control of the Material Flow in the Deep Drawing Process , 2005 .

[55]  J. Hoffmann,et al.  Long Range 3 D Scanning Tunnelling Microscopy , 2007 .

[56]  O. C. Zienkiewicz,et al.  A simple error estimator and adaptive procedure for practical engineerng analysis , 1987 .

[57]  J. Tinsley Oden,et al.  Estimation of local modeling error and goal-oriented adaptive modeling of heterogeneous materials: I. Error estimates and adaptive algorithms , 2000 .

[58]  R. Hill.  Constitutive modelling of orthotropic plasticity in sheet metals , 1990 .

[59]  T. Nakano,et al.  Development of Combined Forming of Cold Forging and Thick Sheet Metal Forming , 2006 .

[60]  Heinz Tschätsch,et al.  Metal Forming Practise: Processes - Machines - Tools , 2006 .

[61]  Alexander Brosius,et al.  An Experimental and Numerical Assessment of Sheet-Bulk Formability of Mild Steel DC04 , 2011 .

[62]  Pierre Montmitonnet,et al.  Experimental and numerical study of the ironing of stainless steel cups , 1999 .

[63]  Ivana Suchy,et al.  Handbook of Die Design , 1997 .

[64]  T. Canta,et al.  Some aspects of energy distribution in rotary forming processes , 1998 .

[65]  K. Kawai,et al.  Boss Forming, An Environment-Friendly Rotary Forming , 2007 .

[66]  Ken-ichiro Mori,et al.  Spline forming of ultra-high strength gear drum using resistance heating of side wall of cup , 2011 .

[67]  A. Tekkaya,et al.  Sheet Metal Forming Processes and Applications , 2012 .

[68]  Karl Kuzman,et al.  Energy Evaluation of Cold-Forming Processes , 1990 .

[69]  Der-Form Chang,et al.  An analytical model of the ironing process including redundant work effect , 1998 .

[70]  A. Vorontsov.  Change in geometry of a cylindrical blank in upsetting with contact friction , 2009 .

[71]  Peter Groche,et al.  Icremental bulk metal forming , 2007 .

[72]  Reiner Kopp,et al.  A New Rolling Process for Strips with a Defined Cross Section , 2003 .

[73]  Marion Merklein,et al.  Fundamental investigations on the material flow at combined sheet and bulk metal forming processes , 2011 .

[74]  Taylan Altan,et al.  Process optimization in stamping—a case study for flanging a clutch hub from steel plate , 2004 .

[75]  Sri Hinduja,et al.  The effect of ultra-low frequency pulsations on tearing during deep drawing of cylindrical cups , 2008 .

[76]  Taylan Altan,et al.  A critical evaluation of the double cup extrusion test for selection of cold forging lubricants , 2007 .

[77]  F. Barlat,et al.  Plane stress yield function for aluminum alloy sheets—part 1: theory , 2003 .

[78]  K. Mori,et al.  Forming of tailor blanks having local thickening for control of wall thickness of stamped products , 2008 .

[79]  Margaret Lucas,et al.  Superimposed ultrasonic oscillations in compression tests of aluminium. , 2006, Ultrasonics.

[80]  Zlatko Kampuš,et al.  Improving workability in ironing , 2002 .

[81]  K. Siegert,et al.  Influencing the Friction in Metal Forming Processes by Superimposing Ultrasonic Waves , 2001 .

[82]  P M Standring,et al.  Characteristics of rotary forging as an advanced manufacturing tool , 2001 .

[83]  Seijiro Maki,et al.  Warm and Hot Stamping of Ultra High Tensile Strength Steel Sheets Using Resistance Heating , 2005 .

[84]  Liam Blunt,et al.  Paradigm shifts in surface metrology. Part I. Historical philosophy , 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[85]  M. S. Ragab,et al.  Effect of ironing on the residual stresses in deep drawn cups , 2000 .

[86]  J. Hutchinson,et al.  Modification of the Gurson Model for shear failure , 2008 .

[87]  Shi-hong Zhang,et al.  Press Forging of Magnesium-Alloy Notebook Case with Complex Geometry , 2010 .

[88]  Hung-Kuk Oh,et al.  A study on center thinning in the rotary forging of a circular plate , 1997 .

[89]  L. X. Zhou,et al.  Press Forging of Magnesium Alloy AZ31 Sheets , 2007 .

[90]  C. Mallanna,et al.  Mechanics of Flow Forming , 1981 .

[91]  Dorel Banabic,et al.  An improved analytical description of orthotropy in metallic sheets , 2005 .

[92]  Taylan Altan,et al.  Evaluation of lubrication and friction in cold forging using a double backward-extrusion process , 1992 .

[93]  Taylan Altan,et al.  Prediction of process conditions in drawing and ironing of cans , 1996 .

[94]  Trevor A. Dean,et al.  A review of spinning, shear forming and flow forming processes , 2003 .

[95]  Gerhard Hirt,et al.  Metal Flow and Die Filling in Coining of Micro Structures with and without Flash , 2005 .

[96]  K. Hirabayashi.  High Precision Technology on Thick Metal Sheets: ―Ultra-Precise Sheet Forging Technology to Contribute for Eco-Friendly Automotive Manufacturing―@@@－環境対応車に貢献する超精密板鍛造技術－ , 2010 .

[97]  Stefania Bruschi,et al.  Evaluation of friction condition in cold forging by using T-shape compression test , 2009 .

[98]  Julian M. Allwood,et al.  Characterizing the class of local metal sheet thickening processes , 2011 .

[99]  Tae-Wan Ku,et al.  Design and modification of tool to manufacture rectangular cup of Ni-MH battery for hybrid cars , 2007 .

[100]  Taylan Altan,et al.  Mechanical servo press technology for metal forming , 2011 .

[101]  Hoon Huh,et al.  Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis , 2002 .

[102]  Philipp Krämer,et al.  Computed Tomography for Application in Manufacturing Metrology , 2010 .

[103]  Rajiv Shivpuri.  Past developments and future trends in the rotary or orbital forging process , 1988 .

[104]  H. Kudo,et al.  An Attempt for Classification of Metal Forming Operations , 1980 .