This paper presents a Mars Sample Return (MSR) Sample Acquisition and Caching (SAC) study developed for the three rover platforms: MER, MER+, and MSL. The study took into account 26 SAC requirements provided by the NASA Mars Exploration Program Office. For this SAC architecture, the reduction of mission risk was chosen by us as having greater priority than mass or volume. For this reason, we selected a “One Bit per Core” approach. The enabling technology for this architecture is Honeybee Robotics' “eccentric tubes” core breakoff approach. The breakoff approach allows the drill bits to be relatively small in diameter and in turn lightweight. Hence, the bits could be returned to Earth with the cores inside them with only a modest increase to the total returned mass, but a significant decrease in complexity. Having dedicated bits allows a reduction in the number of core transfer steps and actuators. It also alleviates the bit life problem, eliminates cross contamination, and aids in hermetic sealing. An added advantage is faster drilling time, lower power, lower energy, and lower Weight on Bit (which reduces Arm preload requirements). Drill bits are based on the BigTooth bit concept, which allows re-use of the same bit multiple times, if necessary. The proposed SAC consists of a 1) Rotary-Percussive Core Drill, 2) Bit Storage Carousel, 3) Cache, 4) Robotic Arm, and 5) Rock Abrasion and Brushing Bit (RABBit), which is deployed using the Drill. The system also includes PreView bits (for viewing of cores prior to caching) and Powder bits for acquisition of regolith or cuttings. The SAC total system mass is less than 22 kg for MER and MER+ size rovers and less than 32 kg for the MSL-size rover.
[1]
Eric Kulczycki,et al.
Results from Testing of Two Rotary Percussive Drilling Systems
,
2010
.
[2]
Philip R Christensen,et al.
The many faces of Mars.
,
2005,
Scientific American.
[3]
Kris Zacny,et al.
Drilling in extreme environments : penetration and sampling on Earth and other planets
,
2009
.
[4]
Jack Craft,et al.
Mars drill for the Mars sample return mission with a Brushing and Abrading bit, regolith and powder bit, core PreView Bit and a coring bit
,
2012,
2012 IEEE Aerospace Conference.
[5]
Paul Backes,et al.
An integrated coring and caching concept
,
2010,
2010 IEEE Aerospace Conference.
[6]
John E. Wilson,et al.
Core Acquisition and Caching for the 2018 Mars Sample Return Mission
,
2011
.
[7]
Yoseph Bar-Cohen,et al.
Drilling in Extreme Environments
,
2009
.
[8]
Kris Zacny,et al.
Prototype rotary percussive drill for the Mars Sample Return mission
,
2011,
2011 Aerospace Conference.
[9]
Jack Craft,et al.
Development of the Brushing, Abrading, Regolith, Core PreView and the Coring Bits for the Mars Sample Return Mission
,
2011
.