Identifying the Development State of Sintered Silver (Ag) as a Bonding Material in the Microelectronic Packaging Via a Patent Landscape Study

Sintered silver joint is a porous silver that bonds a semiconductor die to the substrate as part of the packaging process. Sintered Ag is one of the few possible bonding methods to fulfill the operating conditions of wide band-gap (WBG) power device technologies. We review the current technology development of sintered Ag as a bonding material from the perspective of patents filed by various stakeholders since late 1980s. This review addresses the formulation of sintered pastes (i.e., nano-Ag, hybrid Ag, and micron Ag fillers), innovations in the process and equipment to form this Ag joint. This review will provide the insights and confidence to engineers, scientists from universities and industry as well as investors who are developing and commercializing the sintered Ag as a bonding material for microelectronic packaging. [DOI: 10.1115/1.4033069]

[1]  K. Ngo,et al.  Shrinkage and Sintering Behavior of a Low-Temperature Sinterable Nanosilver Die-Attach Paste , 2012, Journal of Electronic Materials.

[2]  Zhenxian Liang,et al.  Properties of Bulk Sintered Silver As a Function of Porosity , 2012 .

[3]  Samjid H. Mannan,et al.  Microstructure evolution during 300 °C storage of sintered Ag nanoparticles on Ag and Au substrates , 2014 .

[4]  Guo-Quan Lu,et al.  Study on high temperature bonding reliability of sintered nano-silver joint on bare copper plate , 2015, Microelectron. Reliab..

[5]  G. Zou,et al.  Joining of Silver Nanomaterials at Low Temperatures: Processes, Properties, and Applications. , 2015, ACS applied materials & interfaces.

[6]  Kojiro F. Kobayashi,et al.  Study of Bonding Technology Using Silver Nanoparticles , 2008 .

[7]  Andreas Schletz,et al.  B3.3 - Properties of a novel silver sintering die attach material for high temperature - high lifetime applications , 2013 .

[8]  C. Gobl,et al.  Low temperature sinter technology die attachment for power electronic applications , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[9]  P. Ning,et al.  Parametric Study on Pressureless Sintering of Nanosilver Paste to Bond Large-Area (≥100 mm2) Power Chips at Low Temperatures for Electronic Packaging , 2015, Journal of Electronic Materials.

[10]  Régis Meuret,et al.  Power modules die attach: A comprehensive evolution of the nanosilver sintering physical properties versus its porosity , 2015, Microelectron. Reliab..

[11]  Keun-Soo Kim,et al.  Low-Temperature and Pressureless Ag–Ag Direct Bonding for Light Emitting Diode Die-Attachment , 2012, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[12]  L. Frey,et al.  Evolution of shear strength and microstructure of die bonding technologies for high temperature applications during thermal aging , 2010, 2010 12th Electronics Packaging Technology Conference.

[13]  T. Xia,et al.  Particle size and pore structure characterization of silver nanoparticles prepared by confined arc plasma , 2009 .

[14]  Microstructure and electrical resistance evolution during sintering of a Ag nanoparticle paste , 2015 .

[15]  A. Bakin,et al.  SiC-Die-Attachment for High Temperature Applications , 2010 .

[16]  G. Lu,et al.  Rapid Sintering Nanosilver Joint by Pulse Current for Power Electronics Packaging , 2013, IEEE Transactions on Device and Materials Reliability.

[17]  Katsuaki Suganuma,et al.  Addition of SiC Particles to Ag Die-Attach Paste to Improve High-Temperature Stability; Grain Growth Kinetics of Sintered Porous Ag , 2015, Journal of Electronic Materials.

[18]  G. Lu,et al.  Microstructure and Joint Properties of Nano-Silver Paste by Ultrasonic-Assisted Pressureless Sintering , 2016, Journal of Electronic Materials.

[19]  Shlomo Magdassi,et al.  Flexible transparent conductive coatings by combining self-assembly with sintering of silver nanoparticles performed at room temperature , 2011 .

[20]  Nikhilesh Chawla,et al.  Microstructure and mechanical behavior of porous sintered steels , 2005 .

[21]  R. Johnson,et al.  Pressureless Sintering of Microscale Silver Paste for 300 °C Applications , 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[22]  K. S. Kim,et al.  Low-temperature low-pressure die attach with hybrid silver particle paste , 2012, Microelectron. Reliab..

[23]  K. S. Siow,et al.  Are Sintered Silver Joints Ready for Use as Interconnect Material in Microelectronic Packaging? , 2014, Journal of Electronic Materials.

[24]  A. Tay,et al.  Mechanical properties of nanocrystalline copper and nickel , 2004 .

[25]  Andreas Schletz,et al.  Power semiconductor joining through sintering of silver nanoparticles: Evaluation of influence of parameters time, temperature and pressure on density, strength and reliability , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[26]  S. T. Chua,et al.  Microstructural studies and bonding strength of pressureless sintered nano-silver joints on silver, direct bond copper (DBC) and copper substrates aged at 300 °C , 2016 .

[27]  Z. P. Wang,et al.  Microstructure and intermetallic growth effects on shear and fatigue strength of solder joints subjected to thermal cycling aging , 2001 .

[28]  H. Nishikawa,et al.  Silver nanoporous sheet for solid-state die attach in power device packaging , 2014 .

[29]  H. Brouwers,et al.  Particle-size distribution and packing fraction of geometric random packings. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[30]  P. Burman,et al.  Correlation between intermetallic thickness and roughness during solder reflow , 2001 .

[31]  F. Che,et al.  Characterization of IMC layer and its effect on thermomechanical fatigue life of Sn–3.8Ag–0.7Cu solder joints , 2012 .

[32]  R. Khazaka,et al.  Characterization of Nanosilver Dry Films for High-Temperature Applications , 2015, IEEE Transactions on Device and Materials Reliability.

[33]  H. V. Swygenhoven,et al.  Deformation behavior of sintered nanocrystalline silver layers , 2015 .

[34]  E. Zwierkowska,et al.  Influence of nanoparticles content in silver paste on mechanical and electrical properties of LTJT joints , 2015 .

[35]  F. Schoenstein,et al.  Spark Plasma Sintering constrained process parameters of sintered silver paste for connection in power electronic modules: Microstructure, mechanical and thermal properties , 2014 .

[36]  A. Waag,et al.  Analysis and Modeling of Thermomechanically Improved Silver-Sintered Die-Attach Layers Modified by Additives , 2011, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[37]  L. Mendizabal,et al.  Review on Joint Shear Strength of Nano-Silver Paste and Its Long-Term High Temperature Reliability , 2014, Journal of Electronic Materials.

[38]  Khai D. T. Ngo,et al.  Chip-Bonding on Copper by Pressureless Sintering of Nanosilver Paste Under Controlled Atmosphere , 2014, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[39]  Anming Hu,et al.  Recent progresses on hybrid micro–nano filler systems for electrically conductive adhesives (ECAs) applications , 2015, Journal of Materials Science: Materials in Electronics.

[40]  J. Mackenzie,et al.  A Phenomenological Theory of Sintering , 1949 .

[41]  Bruno Allard,et al.  Migration issues in sintered-silver die attaches operating at high temperature , 2013, Microelectron. Reliab..

[42]  B. Kear,et al.  Processing of Nanostructured Zirconia Ceramics , 1995 .

[43]  Wolfgang Schmitt,et al.  Novel silver contact paste lead free solution for die attach , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[44]  N. Lee,et al.  Achieving high reliability via pressureless sintering of nano-Ag paste for die-attach , 2015, 2015 16th International Conference on Electronic Packaging Technology (ICEPT).

[45]  K. S. Siow,et al.  Mechanical properties of nano-silver joints as die attach materials , 2012 .

[46]  Bruno Allard,et al.  State of the art of high temperature power electronics , 2009 .

[47]  Xu Chen,et al.  Migration of Sintered Nanosilver Die-Attach Material on Alumina Substrate Between 250 $^{\circ}\hbox{C}$ and 400 $^{ \circ}\hbox{C}$ in Dry Air , 2011, IEEE Transactions on Device and Materials Reliability.

[49]  Yoshiaki Morisada,et al.  A Low-Temperature Pressureless Bonding Process Using a Trimodal Mixture System of Ag Nanoparticles , 2011 .

[50]  D. DeVoto.  Reliability of Bonded Interfaces (Presentation) , 2013 .

[51]  J. Wilde,et al.  Assessment of thermo-mechanical stresses in Low Temperature Joining Technology , 2012, 2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems.

[52]  W. Schmitt,et al.  New silver contact pastes from high pressure sintering to low pressure sintering , 2010, 3rd Electronics System Integration Technology Conference ESTC.

[53]  James M. Utterback,et al.  Mastering the Dynamics of Innovation , 1996 .