Performance of Free Rolling and Powered Tillage Discs

Abstract This research study was done in the soil dynamics laboratory of Faculty of Agricultural Engineering, Kasetsart University, Kamphaengsaen Campus, Thailand, to understand the benefits of driven tillage disc by an external power compared to the conventional free rolling tillage disc under controlled experimental conditions. Performance of free rolling and power operated standard concave tillage disc was evaluated in the soil bin with a sandy loam soil (USDA classification). The setup consisted of soil bin system and measurement system. Double extended octagonal ring (DEOR) transducer and torque transducer with slip ring were used for forces and torque measurements. Different disc angles and disc speeds were considered for the study. Soil failure patterns of both discs were also studied. Driving disc by an external power found to be significantly affecting performance of tillage disc. Draft force of the disc observed at disc angles of 23 o , 28 o and 33 o was reduced from 620 N, 860 N and 947 N to 188 N, 254 N and 360 N respectively when free rolling disc was replaced by powered disc. However it increased torque acting on disc driving shaft. Similar trend can be observed in other kinds of soils, however trend will be positioned up or down on Y-axis depending on respective soil strength properties. Moreover, powered disc provided continuous and smooth flow of furrow slice to the side. Consequently, powered disc was proved advantageous over free rolling disc in terms of smooth soil displacement, easy soil volume handling, better inversion of the furrow slice and reduced soil reactions. Moreover it provided better energy utilization.

[1]  D.R.P. Hettiaratchi.  The Soil Contact Zones of Concave Agricultural Discs: Part 1, Theoretical Analysis , 1997 .

[2]  M. J. O'Dogherty,et al.  A triaxial dynamometer for force and moment measurements on tillage implements , 1993 .

[3]  M. Hann,et al.  Force Measurements on Driven Discs , 1998 .

[4]  M. J. O'Dogherty,et al.  The Design of Octagonal Ring Dynamometers , 1996 .

[5]  Vilas M. Salokhe,et al.  Dynamics of a powered disk in clay soil , 1995 .

[6]  U. D. Perdok,et al.  Soil-tool interactions and field performance of implements , 1994 .

[7]  Vilas M. Salokhe,et al.  Power spectral density analysis of draft and torque fluctuations of a PTO powered disk tiller , 1994 .

[8]  Roy Bainer,et al.  Principles of Farm Machinery , 2018 .

[9]  J. A. Weber,et al.  Soil Failure and Pressure Patterns tor Flat Cutting Blades , 1971 .

[10]  Richard J. Godwin,et al.  AN EXTENDED OCTAGONAL RING TRANSDUCER FOR USE IN TILLAGE STUDIES , 1975 .

[11]  Thomas H. Burkhardt,et al.  study of PTO Driven Powered Disk Tiller , 1988 .

[12]  Paul E. Young.  A Machine to Increase Productivity of a Tillage Operation , 1976 .

[13]  D.R.P. Hettiaratchi.  Prediction of Soil Forces Acting on Concave Agricultural Discs , 1997 .

[14]  D.R.P. Hettiaratchi,et al.  Calculation, Validation and Simulation of Soil Reactions on Concave Agricultural Discs , 1997 .

[15]  C. Gupta,et al.  Effects of PTO-powered disk tilling on some physical properties of Bangkok clay soil , 1994 .

[16]  C. P. Gupta,et al.  Field testing of a PTO powered disk tiller , 1994 .

[17]  Alvin C. Bailey,et al.  The Effect of Geometric Parameters on Disk Forces , 1980 .