Microstructure, mechanical properties and fracture toughness of ECAPed magnesium matrix composite reinforced with hydroxyapatite ceramic particulates for bioabsorbable implants

[1]  W. Gan,et al.  Improving the Young's modulus of Mg via alloying and compositing – A short review , 2022, Journal of Magnesium and Alloys.

[2]  Manoj Kumar Gupta,et al.  Assessing Mg/Si3N4 biodegradable nanocomposites for osteosynthesis implants with a focus on microstructural, mechanical, in vitro corrosion and bioactivity aspects , 2022, Journal of Materials Research and Technology.

[3]  M. Kasaeian-Naeini,et al.  An Investigation of Constitutive Modeling and 3D Processing Maps of Mg/HA Composites for Orthopedic Applications , 2022, Journal of Materials Research and Technology.

[4]  Laiqi Zhang,et al.  A review of novel ternary nano-layered MAX phases reinforced AZ91D magnesium composite , 2022, Journal of Magnesium and Alloys.

[5]  Yue Su,et al.  Microstructure Evolution and Properties of β-TCP/Mg-Zn-Ca Biocomposite Processed by Hot Extrusion Combined with Multi-Pass ECAP , 2022, Metals.

[6]  Mohd Mustafa Al Bakri Abdullah,et al.  Synthesis methods of hydroxyapatite from natural sources: A review , 2022, Ceramics International.

[7]  M. Nili-Ahmadabadi,et al.  Free volume formation and the high strength of pure Mg after room temperature core-sheath ECAP passes , 2022, Journal of Materials Research and Technology.

[8]  A. Khademhosseini,et al.  Additively manufactured metallic biomaterials , 2021, Bioactive materials.

[9]  Song-Jeng Huang,et al.  Strength and ductility enhancement of AZ61/Al2O3/SiC hybrid composite by ECAP processing , 2022, Materials Today Communications.

[10]  M. Kasaeian-Naeini,et al.  Severe plastic deformation (SPD) of biodegradable magnesium alloys and composites: A review of developments and prospects , 2021, Journal of Magnesium and Alloys.

[11]  S. Sharif,et al.  Overview of magnesium-ceramic composites: Mechanical, corrosion and biological properties , 2021, Journal of Materials Research and Technology.

[12]  T. Olugbade,et al.  Corrosion, Corrosion Fatigue, and Protection of Magnesium Alloys: Mechanisms, Measurements, and Mitigation , 2021, Journal of Materials Engineering and Performance.

[13]  R. Jamaati,et al.  Investigation of microstructure, crystallographic texture, and mechanical behavior of magnesium-based nanocomposite fabricated via multi-pass FSP for biomedical applications. , 2021, Journal of the mechanical behavior of biomedical materials.

[14]  B. Ravisankar,et al.  Effect of processing route on microstructure, mechanical and dry sliding wear behavior of commercially pure magnesium processed by ECAP with back pressure , 2021, Transactions of the Indian Institute of Metals.

[15]  Zhenzhen Gui,et al.  Precipitation behaviors and mechanical properties of a solution-treated Mg-Gd-Nd-Zn-Zr alloy during equal-channel angular pressing process , 2021, Journal of Magnesium and Alloys.

[16]  M. Sedighi,et al.  In vitro corrosion-fatigue behavior of biodegradable Mg/HA composite in simulated body fluid , 2021 .

[17]  S. H. Seyedein,et al.  Simulation of deformation and fracture initiation during equal channel angular pressing of AZ31 magnesium alloy with covered tube casing , 2021, Journal of Materials Research and Technology.

[18]  Akash Gupta,et al.  Effect of Equal-channel angular pressing on mechanical Properties: An overview , 2021, Materials Today: Proceedings.

[19]  Darush Zia Shamami,et al.  Use of rapid microwave sintering technique for the processing of magnesium-hydroxyapatite composites , 2021 .

[20]  G. Eggeler,et al.  Surface metal matrix nano-composite of magnesium/hydroxyapatite produced by stir-centrifugal casting , 2020 .

[21]  G. Radhakrishnan,et al.  Investigation into Physical, Microstructural and Mechanical Behaviour of Titanium dioxide Nanoparticulate Reinforced Magnesium Composite , 2020 .

[22]  R. Radha,et al.  Mechanical and corrosion behaviour of hydroxyapatite reinforced Mg-Sn alloy composite by squeeze casting for biomedical applications , 2020 .

[23]  M. Razavi,et al.  Effect of hydroxyapatite (HA) nanoparticles shape on biodegradation of Mg/HA nanocomposites processed by high shear solidification/equal channel angular extrusion route , 2020 .

[24]  F. Berto,et al.  The effect of Equal Channel Angular Pressing on the stress corrosion cracking susceptibility of AZ31 alloy in simulated body fluid. , 2020, Journal of the mechanical behavior of biomedical materials.

[25]  M. Sedighi,et al.  High cycle fatigue behavior of magnesium matrix nanocomposite at elevated temperatures , 2020 .

[26]  G. Faraji,et al.  Microstructure, mechanical properties and bio-corrosion properties of Mg-HA bionanocomposites fabricated by a novel severe plastic deformation process , 2020 .

[27]  H. Somekawa.  Effect of Alloying Elements on Fracture Toughness and Ductility in Magnesium Binary Alloys; A Review , 2020, MATERIALS TRANSACTIONS.

[28]  C. Wen,et al.  Prospects and Strategies for Magnesium Alloys as Biodegradable Implants from Crystalline to Bulk Metallic Glasses and Composites - A Review , 2019, Acta biomaterialia.

[29]  Song-Jeng Huang,et al.  Experimental investigations of effects of SiC contents and severe plastic deformation on the microstructure and mechanical properties of SiCp/AZ61 magnesium metal matrix composites , 2019, Journal of Materials Processing Technology.

[30]  N. Al-Aqeeli,et al.  Magnesium-based composites and alloys for medical applications: A review of mechanical and corrosion properties , 2019, Journal of Alloys and Compounds.

[31]  S. Kamado,et al.  Ultra-fine grained Mg-Zn-Ca-Mn alloy with simultaneously improved strength and ductility processed by equal channel angular pressing , 2019, Journal of Alloys and Compounds.

[32]  M. Farahani,et al.  Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC , 2019, Materials Science and Engineering: A.

[33]  M. Krishna,et al.  Magnesium matrix composites for biomedical applications: A review , 2019, Journal of Magnesium and Alloys.

[34]  Song-Jeng Huang,et al.  Ductile fracture behavior of ECAP deformed AZ61 magnesium alloy based on response surface methodology and finite element simulation , 2019, Materials Science and Engineering: A.

[35]  J. Robson,et al.  The Effect of Precipitates on Twinning in Magnesium Alloys , 2018, Advanced Engineering Materials.

[36]  R. Seifi,et al.  Effects of crack orientation on the fatigue crack growth rate and fracture toughness of AA6063 alloy deformed by ECAP , 2018, Materials Science and Engineering: A.

[37]  Junyi Li,et al.  Mg–3Zn–0.5Zr/HA nanocomposites fabricated by high shear solidification and equal channel angular extrusion , 2018, Materials Science and Technology.

[38]  F. Pastorek,et al.  Effect of ECAP Processing on Corrosion Behavior and Mechanical Properties of the ZFW MP Magnesium Alloy as a Biodegradable Implant Material , 2018, Advanced Engineering Materials.

[39]  K. Nie,et al.  Effects of (micron+submicron+nano) multisized SiC particles on microstructure and mechanical properties of magnesium matrix composites , 2018 .

[40]  P. Roy,et al.  Mechanical, corrosion and biocompatibility behaviour of Mg-3Zn-HA biodegradable composites for orthopaedic fixture accessories. , 2018, Journal of the mechanical behavior of biomedical materials.

[41]  Xiaoshi Hu,et al.  Anisotropic mechanical and physical properties in textured Ti 2 AlC reinforced AZ91D magnesium composite , 2018 .

[42]  Y. Estrin,et al.  Increasing strength and ductility of magnesium alloy WE43 by equal-channel angular pressing , 2018 .

[43]  T. Webster,et al.  Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ31. , 2017, Acta biomaterialia.

[44]  B. Mohammadi,et al.  Experimental evaluation of the plane stress fracture toughness for ultra-fine grained aluminum specimens prepared by accumulative roll bonding process , 2017 .

[45]  M. Zha,et al.  Tensile properties, texture evolutions and deformation anisotropy of as-extruded Mg-6Zn-1Zr magnesium alloy at room and elevated temperatures , 2017 .

[46]  S. Sahu,et al.  Microstructural Evolution and Strengthening of AM90 Magnesium Alloy Processed by ECAP , 2017 .

[47]  A. Muñoz,et al.  Processing and mechanical characteristics of magnesium-hydroxyapatite metal matrix biocomposites. , 2017, Journal of the mechanical behavior of biomedical materials.

[48]  Nikhil Kumar,et al.  A study on fracture toughness and strain rate sensitivity of severely deformed Al 6063 alloys processed by multiaxial forging and rolling at cryogenic temperature , 2017 .

[49]  M. Morovvati,et al.  Effect of nano/micro B4C and SiC particles on fracture properties of aluminum 7075 particulate composites under chevron-notch plane strain fracture toughness test , 2016 .

[50]  W. Gan,et al.  Microstructure evolution and mechanical properties of nano-SiCp/AZ91 composite processed by extrusion and equal channel angular pressing (ECAP) , 2016 .

[51]  Wei Li,et al.  Characterization of biomedical hydroxyapatite/magnesium composites prepared by powder metallurgy assisted with microwave sintering , 2016 .

[52]  B. Mohammadi,et al.  Effect of equal channel angular pressing on fracture toughness of Al-7075 , 2016 .

[53]  F. Pan,et al.  Use of high energy ball milling to study the role of graphene nanoplatelets and carbon nanotubes reinforced magnesium alloy , 2015 .

[54]  M. Surappa,et al.  Effect of extrusion ratio on the microstructure, texture and mechanical properties of (Mg/AZ91)m–SiCp composite , 2015 .

[55]  B. Mohammadi,et al.  Effects of Constrained Groove Pressing (CGP) on the plane stress fracture toughness of pure copper , 2014 .

[56]  S. Suwas,et al.  Nano-ZnO particle addition to monolithic magnesium for enhanced tensile and compressive response , 2014 .

[57]  M. Medraj,et al.  Synthesis and biodegradation evaluation of nano-Si and nano-Si/TiO2 coatings on biodegradable Mg-Ca alloy in simulated body fluid , 2014 .

[58]  A. Muñoz,et al.  Mechanical properties and corrosion behavior of Mg-HAP composites. , 2014, Journal of the mechanical behavior of biomedical materials.

[59]  M. Vedani,et al.  Microstructure, texture evolution, mechanical properties and corrosion behavior of ECAP processed ZK60 magnesium alloy for biodegradable applications. , 2014, Journal of the mechanical behavior of biomedical materials.

[60]  Yunfei Ding,et al.  Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: a review. , 2014, Journal of materials chemistry. B.

[61]  S. Narendranath,et al.  Effect of equal channel angular pressing on AZ31 wrought magnesium alloys , 2013 .

[62]  K. Tsuzaki,et al.  Effect of solute atoms on fracture toughness in dilute magnesium alloys , 2013 .

[63]  M. Gupta,et al.  Synthesis and Characterization of Nano Boron Nitride Reinforced Magnesium Composites Produced by the Microwave Sintering Method , 2013, Materials.

[64]  F. Fereshteh-Saniee,et al.  Microstructural homogeneity, texture, tensile and shear behavior of AM60 magnesium alloy produced by extrusion and equal channel angular pressing , 2013 .

[65]  M. R. Toroghinejad,et al.  Nano/Ultrafine Structured AA1100 by ARB Process , 2011 .

[66]  K. Hong,et al.  Comparative property study on extruded Mg–HAP and ZM61–HAP composites , 2010 .

[67]  Yufeng Zheng,et al.  Microstructure, mechanical property, bio-corrosion and cytotoxicity evaluations of Mg/HA composites , 2010 .

[68]  K. Hong,et al.  Microstructure and mechanical properties of Mg-HAP composites , 2010 .

[69]  M. Wong,et al.  Stearic acid coating on magnesium for enhancing corrosion resistance in Hanks' solution , 2010 .

[70]  T. Langdon,et al.  Processing of a magnesium alloy by equal-channel angular pressing using a back-pressure , 2009 .

[71]  A. Singh,et al.  High fracture toughness of extruded Mg–Zn–Y alloy by the synergistic effect of grain refinement and dispersion of quasicrystalline phase , 2007 .

[72]  H. Somekawa,et al.  Fracture toughness in Mg–Al–Zn alloy processed by equal-channel-angular extrusion , 2006 .

[73]  H. Somekawa,et al.  Effect of grain refinement on fracture toughness in extruded pure magnesium , 2005 .

[74]  Q. Jiang,et al.  Fabrication of TiB2 particulate reinforced magnesium matrix composites by powder metallurgy , 2004 .

[75]  Xing Yang Liu,et al.  Review of recent studies in magnesium matrix composites , 2004 .

[76]  D. Farkas,et al.  Molecular Dynamics Investigation on the Fracture Behavior of Nanocrystalline Fe , 2002 .