Metal oxide coated cathode materials for Li ion batteries – A review

Abstract The primary power sources for movable electronic devices and vehicles are mostly based on lithium-ion batteries in the recent decays. Conversely, they suffer from restrictions for their use in electric resources of transportation and other high-level applications. Extended application of lithium-ion batteries needs the fabrication of novel electrode materials with outstanding electrochemical performances, which, to a great extent, depends on the electrode materials. The efficiency of the electrode materials have been improved by doping and coating to improve the performance of an anode or cathode materials in Li-ion batteries (LIBs). Elemental doping and coatings have modified by most of the commonly used electrode materials, which are used either as anode or cathode materials. This has led to the high diffusivity of Li-ions, ionic mobility and conductivity apart from specific capacity. Most of the newly stated electrode materials have been identified as to provide an enhanced performance by several parameters such as specific capacity, specific energy cyclic stability and charge/discharge rate. Cathode materials stock energy through intercalation or conversion reactions, even though the energy storage process in anode materials are intercalation, conversion reactions or alloying/dealloying. Therefore, the existing situation of electrode materials of Li-ion batteries can be extremely promising in enhancing the battery performance making it more efficient than before. Based on the electrode material, one or more of the above-mentioned mechanisms may take place which directly affects the battery performance. In this review, we have reported the performance of the existing metal oxide coated cathode materials in LIB applications and the way to improve the performance of the LIBs with new cathode using Ni-rich, Li–rich layered and self-supported porous materials as a cathode material with three-dimensional nanoarchitecture.

[1]  H. Hng,et al.  Reduced graphene oxide supported highly porous V2O5 spheres as a high-power cathode material for lithium ion batteries. , 2011, Nanoscale.

[2]  Seung M. Oh,et al.  Long-Life Nickel-Rich Layered Oxide Cathodes with a Uniform Li2ZrO3 Surface Coating for Lithium-Ion Batteries. , 2017, ACS applied materials & interfaces.

[3]  M. Ge,et al.  Ultrathin Surface Modification By Atomic Layer Deposition on High Voltage Cathode LiNi0.5Mn1.5O4 for Lithium Ion Batteries , 2014 .

[4]  Zhongya Zhang,et al.  Synthesis of Carbon-Coated LiFePO4 Cathode Material by One-Step Microwave-Assisted Pyrolysis of Ionic Liquid Process , 2016 .

[5]  Guoxiu Wang,et al.  Electrochemical Performance of SnPO4-coated LiNi1/3Mn1/3Co1/3O2 Cathode Materials , 2009 .

[6]  C. Delmas,et al.  Optimization of the Composition of the Li1 − z Ni1 + z O 2 Electrode Materials: Structural, Magnetic, and Electrochemical Studies , 1996 .

[7]  Jun Yang,et al.  Nitrogen-doped carbon-coated V2O5 nanocomposite as cathode materials for lithium-ion battery , 2018, Journal of Materials Science.

[8]  D. Ye,et al.  Li2MnO3 based Li-rich cathode materials: towards a better tomorrow of high energy lithium ion batteries , 2014 .

[9]  E. Uchaker,et al.  Sn-Doped V2O5 Film with Enhanced Lithium-Ion Storage Performance , 2013 .

[10]  D. Zhao,et al.  Functional Nanoporous Graphene Foams with Controlled Pore Sizes , 2012, Advanced materials.

[11]  R. Holze,et al.  Electrode materials for lithium secondary batteries prepared by sol-gel methods , 2005 .

[12]  Bingyun Li,et al.  Recent progress in Li-rich layered oxides as cathode materials for Li-ion batteries , 2014 .

[13]  Hanseul Kim,et al.  Role of Na+ in the Cation Disorder of [Li1-xNax]NiO2 as a Cathode for Lithium-Ion Batteries , 2018 .

[14]  Yang-Kook Sun,et al.  Improved electrochemical properties of BiOF-coated 5 V spinel Li[Ni0.5Mn1.5]O4 for rechargeable lithium batteries , 2010 .

[15]  Jaephil Cho,et al.  LiCoO2 Cathode Material That Does Not Show a Phase Transition from Hexagonal to Monoclinic Phase , 2001 .

[16]  Doron Aurbach,et al.  Challenges in the development of advanced Li-ion batteries: a review , 2011 .

[17]  Dunmin Lin,et al.  Enhanced cycling stability and rate capability of Bi2O3-coated Li1.2Mn0.54Ni0.13Co0.13O2 cathode materials for lithium-ion batteries , 2016 .

[18]  Jenq-Gong Duh,et al.  LiCoO2 cathode material coated with nano-crystallized ZnO for Li-ion batteries , 2004 .

[19]  Kaiqi Xu,et al.  Comparison of the Electrochemical Performance and Thermal Stability for Three Kinds of Charged Cathodes , 2018, Front. Energy Res..

[20]  R. Li,et al.  3D porous LiFePO4/graphene hybrid cathodes with enhanced performance for Li-ion batteries , 2012 .

[21]  Bruce Dunn,et al.  High-performance sodium-ion pseudocapacitors based on hierarchically porous nanowire composites. , 2012, ACS nano.

[22]  Debasish Mohanty,et al.  Understanding the structure and structural degradation mechanisms in high-voltage, lithium-manganese–rich lithium-ion battery cathode oxides: A review of materials diagnostics , 2015 .

[23]  Jaephil Cho,et al.  Effect of P2O5 and AlPO4 Coating on LiCoO2 Cathode Material , 2003 .

[24]  Si-Jin Kim,et al.  Highly stable TiO2 coated Li2MnO3 cathode materials for lithium-ion batteries , 2016 .

[25]  J. Mun,et al.  AlF3-coated LiMn2O4 as cathode material for aqueous rechargeable lithium battery with improved cycling stability , 2016 .

[26]  Yanli Zhao,et al.  Hierarchical Porous LiNi1/3Co1/3Mn1/3O2 Nano-/Micro Spherical Cathode Material: Minimized Cation Mixing and Improved Li+ Mobility for Enhanced Electrochemical Performance , 2016, Scientific Reports.

[27]  Benhe Zhong,et al.  K-doped layered LiNi0.5Co0.2Mn0.3O2 cathode material: Towards the superior rate capability and cycling performance , 2017 .

[28]  Ilias Belharouak,et al.  Safety characteristics of Li(Ni0.8Co0.15Al0.05)O2 and Li(Ni1/3Co1/3Mn1/3)O2 , 2006 .

[29]  K. Yoo,et al.  Surface Modification of Li(Ni0.6Co0.2Mn0.2)O2 Cathode Materials by Nano-Al2O3 to Improve Electrochemical Performance in Lithium-Ion Batteries , 2017, Materials.

[30]  Ilias Belharouak,et al.  Improved lithium manganese oxide spinel/graphite Li-ion cells for high-power applications , 2004 .

[31]  Chunguang Chen,et al.  Hexaazatrinaphthylene-Based Porous Organic Polymers as Organic Cathode Materials for Lithium-Ion Batteries , 2017 .

[32]  Wei Xiang,et al.  Improving cycling performance and rate capability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials by Li4Ti5O12 coating , 2018 .

[33]  Ling-Ling Xie,et al.  Preparation of ZnO-Coated LiV3O8 as Cathode Materials for Rechargeable Lithium Batteries , 2011, International Journal of Electrochemical Science.

[34]  J. J. Murray,et al.  Electrochemistry and structure of Li2−xCryMn2−yO4 phases , 1999 .

[35]  Alain Mauger,et al.  Minimization of the cation mixing in Li1+x(NMC)1-xO2 as cathode material , 2010 .

[36]  W. Ren,et al.  Li4SiO4-coated LiNi0.5Mn1.5O4 as the high performance cathode materials for lithium-ion batteries , 2017 .

[37]  C. F. Ng,et al.  Three-dimensional graphene foam supported Fe₃O₄ lithium battery anodes with long cycle life and high rate capability. , 2013, Nano letters.

[38]  Bin Wang,et al.  One-dimensional/two-dimensional hybridization for self-supported binder-free silicon-based lithium ion battery anodes. , 2013, Nanoscale.

[39]  Jianhong Liu,et al.  An investigation of V2O5/polypyrrole composite cathode materials for lithium-ion batteries synthesized by sol–gel , 2012 .

[40]  J. Tu,et al.  High-energy cathode materials for Li-ion batteries: A review of recent developments , 2015 .

[41]  Huakun Liu,et al.  Synthesis and electrochemical performance of LiV3O8/carbon nanosheet composite as cathode material for lithium-ion batteries , 2011 .

[42]  W. Chu,et al.  Facile synthesis silkworm-like Ni-rich layered LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries , 2017 .

[43]  Joong-Kee Lee,et al.  Effects of ZnO coating on electrochemical performance and thermal stability of LiCoO2 as cathode material for lithium-ion batteries , 2010 .

[44]  E. Zhecheva,et al.  Effect of Mg doping and MgO-surface modification on the cycling stability of LiCoO2 electrodes , 2001 .

[45]  Jaephil Cho,et al.  Surface Engineering Strategies of Layered LiCoO2 Cathode Material to Realize High‐Energy and High‐Voltage Li‐Ion Cells , 2017 .

[46]  Zhiyong Yu.  Improved Electrochemical Performances of Carbon-coated Li2MoO3 Cathode Materials for Li-ion Batteries , 2018 .

[47]  W. Yoon,et al.  Electrochemical behavior of a micro-patterned Si anode/LiV3O8 secondary cell , 2010 .

[48]  Han-Joo Kim,et al.  Carbon-coated V2O5 nanoparticles derived from metal-organic frameworks as a cathode material for rechargeable lithium-ion batteries , 2017 .

[49]  Jixin Zhu,et al.  Design of Nanostructured Hybrid Materials Based on Carbon and Metal Oxides for Li Ion Batteries , 2012 .

[50]  C. Nan,et al.  Electrochemical performance of Li-rich cathode material, 0.3Li2MnO3–0.7LiMn1/3Ni1/3Co1/3O2 microspheres with F-doping , 2018, Rare Metals.

[51]  Ziyang Guo,et al.  Metal–Organic Frameworks as Cathode Materials for Li–O2 Batteries , 2014, Advanced materials.

[52]  Yong Yang,et al.  Electrochemical Performance and Surface Properties of Bare and TiO2-Coated Cathode Materials in Lithium-Ion Batteries , 2004 .

[53]  K. Shu,et al.  Recent progress in surface coating of cathode materials for lithium ion secondary batteries , 2017 .

[54]  Enyue Zhao,et al.  Improved cycle stability of high-capacity Ni-rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 at high cut-off voltage by Li 2 SiO 3 coating , 2017 .

[55]  Gaojun Wang,et al.  A novel carbon-coated LiCoO2 as cathode material for lithium ion battery , 2007 .

[56]  Zhen-guo Wu,et al.  A comparative study of crystalline and amorphous Li0.5La0.5TiO3 as surface coating layers to enhance the electrochemical performance of LiNi0.815Co0.15Al0.035O2 cathode , 2018 .

[57]  Ke Du,et al.  Comparison of AlPO4- and Co3(PO4)2-coated LiNi0.8Co0.2O2 cathode materials for Li-ion battery , 2008 .

[58]  M. Shobana,et al.  Improved electrode materials for Li-ion batteries using microscale and sub-micrometer scale porous materials - A review , 2017 .

[59]  Zaiping Guo,et al.  An investigation of polypyrrole-LiV3O8 composite cathode materials for lithium-ion batteries , 2007 .

[60]  Bao Zhang,et al.  3D-porous β-LiVOPO4/C microspheres as a cathode material with enhanced performance for Li-ion batteries , 2015 .

[61]  Sanjaya D. Perera,et al.  Vanadium oxide nanowire – Graphene binder free nanocomposite paper electrodes for supercapacitors: A facile green approach , 2013 .

[62]  Zhen-guo Wu,et al.  Highly Stabilized Ni-Rich Cathode Material with Mo Induced Epitaxially Grown Nanostructured Hybrid Surface for High-Performance Lithium-Ion Batteries. , 2019, ACS applied materials & interfaces.

[63]  Ahmad Azmin Mohamad,et al.  Advances of aqueous rechargeable lithium-ion battery: A review , 2015 .

[64]  Tae-Joon Kim,et al.  High-Performance ZrO2-Coated LiNiO2 Cathode Material , 2001 .

[65]  A. Shukla,et al.  Nitrate-Melt Synthesized HT-LiCoO2 as a Superior Cathode-Material for Lithium-Ion Batteries , 2009, Materials.

[66]  Bin Wang,et al.  Encapsulating V2O5 into carbon nanotubes enables the synthesis of flexible high-performance lithium ion batteries , 2016 .

[67]  Yan Wang,et al.  Al2O3 coated LiCoO2 as cathode for high-capacity and long-cycling Li-ion batteries , 2018, Chinese Chemical Letters.

[68]  B. Cho,et al.  Effect of Al2O3 coating on electrochemical performance of LiCoO2 as cathode materials for secondary lithium batteries , 2004 .

[69]  Zhen-guo Wu,et al.  Promoting the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode via LaAlO3 coating , 2018, Journal of Alloys and Compounds.

[70]  Y. Kang,et al.  LiCo1−xAlxO2 (0 ≤ x ≤ 0.05) cathode powders prepared from the nanosized Co1−xAlxOy precursor powders , 2008 .

[71]  Jun Chen,et al.  SiO2-coated LiNi0.915Co0.075Al0.01O2 cathode material for rechargeable Li-ion batteries. , 2016, Nanoscale.

[72]  Chun-hua Chen,et al.  Three-dimensional porous V2O5 cathode with ultra high rate capability , 2011 .

[73]  Yunlong Zhao,et al.  Cucumber-like V2O5/poly(3,4-ethylenedioxythiophene)&MnO2 nanowires with enhanced electrochemical cyclability. , 2013, Nano letters.

[74]  Liquan Chen,et al.  Al2O3-coated LiCoO2 as cathode material for lithium ion batteries , 2002 .

[75]  Wenquan Lu,et al.  Graphene-modified nanostructured vanadium pentoxide hybrids with extraordinary electrochemical performance for Li-ion batteries , 2015, Nature Communications.

[76]  G. Rubloff,et al.  Impact of pore size, interconnections, and dynamic conductivity on the electrochemistry of vanadium pentoxide in well defined porous structures. , 2018, Physical chemistry chemical physics : PCCP.

[77]  Jinghua Yin,et al.  Free-standing three-dimensional continuous multilayer V2O5 hollow sphere arrays as high-performance cathode for lithium batteries , 2015 .

[78]  Joon Kyo Seo,et al.  Self-standing porous LiMn2O4 nanowall arrays as promising cathodes for advanced 3D microbatteries and flexible lithium-ion batteries , 2016 .

[79]  Michael M. Thackeray,et al.  Manganese oxides for lithium batteries , 1997 .

[80]  Tae-Joon Kim,et al.  Suppression of Cobalt Dissolution from the LiCoO2 Cathodes with Various Metal-Oxide Coatings , 2003 .

[81]  Yang-Kook Sun,et al.  Surface modification of LiNi0.5Mn1.5O4 by ZrP2O7 and ZrO2 for lithium-ion batteries , 2010 .

[82]  Zhiyu Wang,et al.  Synthesis of a porous sheet-like V2O5–CNT nanocomposite using an ice-templating ‘bricks-and-mortar’ assembly approach as a high-capacity, long cyclelife cathode material for lithium-ion batteries , 2016 .

[83]  A. Chatterjee,et al.  Flagellar filament bio-templated inorganic oxide materials – towards an efficient lithium battery anode , 2015, Scientific Reports.

[84]  Tsutomu Ohzuku,et al.  An overview of positive-electrode materials for advanced lithium-ion batteries , 2007 .

[85]  Kang Xu,et al.  “Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries , 2015, Science.

[86]  S. Deng,et al.  Bismuth Oxide: A New Lithium-Ion Battery Anode. , 2013, Journal of materials chemistry. A.

[87]  J. Tarascon,et al.  THE SPINEL PHASE OF LIMN2O4 AS A CATHODE IN SECONDARY LITHIUM CELLS , 1991 .

[88]  Xiangnan Li,et al.  Improvement of the Cycling Performance and Thermal Stability of Lithium-Ion Batteries by Coating Cathode Materials with Al2O3 Nano Layer , 2017 .

[89]  Darren Delai Sun,et al.  Hierarchical 3D micro-/nano-V2O5 (vanadium pentoxide) spheres as cathode materials for high-energy and high-power lithium ion-batteries , 2014 .

[90]  Xiao-dong Guo,et al.  Synergistic coupling effect of sodium and fluorine co-substitution on enhancing rate capability and cycling performance of Ni-rich cathode for lithium ion battery , 2019, Journal of Alloys and Compounds.

[91]  Xiqian Yu,et al.  Al2O3 surface coating on LiCoO2 through a facile and scalable wet-chemical method towards high-energy cathode materials withstanding high cutoff voltages , 2017 .

[92]  Yong‐Sheng Hu,et al.  Integrated Surface Functionalization of Li-Rich Cathode Materials for Li-Ion Batteries. , 2018, ACS applied materials & interfaces.

[93]  John Banhart,et al.  On the Road Again: Metal Foams Find Favor , 2002 .

[94]  Feng Wu,et al.  Exposing the {010} Planes by Oriented Self-Assembly with Nanosheets To Improve the Electrochemical Performances of Ni-Rich Li[Ni0.8Co0.1Mn0.1]O2 Microspheres. , 2018, ACS applied materials & interfaces.

[95]  Haixia Li,et al.  Stabilizing nickel-rich layered oxide cathodes by magnesium doping for rechargeable lithium-ion batteries† †Electronic supplementary information (ESI) available: Experimental section, additional figures, tables as mentioned in the text. See DOI: 10.1039/c8sc03385d , 2018, Chemical science.

[96]  Dan Feng,et al.  A Family of Highly Ordered Mesoporous Polymer Resin and Carbon Structures from Organic−Organic Self-Assembly , 2006 .

[97]  Feng Li,et al.  Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates , 2012, Proceedings of the National Academy of Sciences.

[98]  Xiaogang Zhang,et al.  Exploring metal organic frameworks for energy storage in batteries and supercapacitors , 2017 .

[99]  Zhixing Wang,et al.  Improving the cycling performance of LiNi0.8Co0.1Mn0.1O2 by surface coating with Li2TiO3 , 2016 .

[100]  R. Malik.  Li-Rich Layered Cathode Materials: Transition Metals in Transit , 2017 .

[101]  Yong Yang,et al.  Reaction mechanism and kinetics of lithium ion battery cathode material LiNiO2 with CO2 , 2007 .

[102]  J. Duh,et al.  Effect of calcination temperature on the electrochemical behavior of ZnO-coated LiCoO2 cathode , 2006 .

[103]  Jaephil Cho,et al.  PVP-functionalized nanometre scale metal oxide coatings for cathode materials: successful application to LiMn2O4 spinel nanoparticles. , 2008, Chemical communications.

[104]  Wei Xiang,et al.  Constructing a Protective Pillaring Layer by Incorporating Gradient Mn4+ to Stabilize the Surface/Interfacial Structure of LiNi0.815Co0.15Al0.035O2 Cathode. , 2018, ACS applied materials & interfaces.

[105]  Haoshen Zhou,et al.  Environmentally stable interface of layered oxide cathodes for sodium-ion batteries , 2017, Nature Communications.

[106]  J. Janek,et al.  Molecular Surface Modification of NCM622 Cathode Material Using Organophosphates for Improved Li-Ion Battery Full-Cells. , 2018, ACS applied materials & interfaces.

[107]  V. Battaglia,et al.  Li3PO4-coated LiNi0.5Mn1.5O4: a stable high-voltage cathode material for lithium-ion batteries. , 2014, Chemistry.

[108]  Cuiling Li,et al.  Significant improvement of electrochemical performance of Cu-coated LiVPO4F cathode material for lithium-ion batteries , 2015, Journal of Chemical Sciences.

[109]  Chao Gao,et al.  Multifunctional, Ultra‐Flyweight, Synergistically Assembled Carbon Aerogels , 2013, Advanced materials.

[110]  Feng Wu,et al.  Effect of Ni(2+) content on lithium/nickel disorder for Ni-rich cathode materials. , 2015, ACS applied materials & interfaces.

[111]  G. Lindbergh,et al.  Preparation and electrochemical properties of nanocrystalline LiBxMn2−xO4 cathode particles for Li-ion batteries by ultrasonic spray pyrolysis method , 2015 .

[112]  Joseph Paul Baboo,et al.  Amorphous iron phosphate: potential host for various charge carrier ions , 2014 .

[113]  B. Polzin,et al.  Functioning Mechanism of AlF3 Coating on the Li- and Mn-Rich Cathode Materials , 2014 .

[114]  J. Tu,et al.  High-energy cathode materials for Li-ion batteries: A review of recent developments , 2015 .

[115]  J. Dahn,et al.  Effect of a ZrO2 Coating on the Structure and Electrochemistry of Li x CoO2 When Cycled to 4.5 V , 2002 .

[116]  Zhixing Wang,et al.  Improvement in the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material by Li2ZrO3 coating , 2017 .

[117]  Weihua Chen,et al.  Hierarchical porous onion-shaped LiMn2O4 as ultrahigh-rate cathode material for lithium ion batteries , 2018, Nano Research.

[118]  Jiulin Wang,et al.  Highly promoted electrochemical performance of 5 V LiCoPO4 cathode material by addition of vanadium , 2010 .

[119]  Faqiang Li,et al.  Improving the Electrochemical Performance of Ni-Rich LiNi0.8 Co0.1 Mn0.1 O2 by Enlarging the Li Layer Spacing , 2018, Energy Technology.

[120]  Q. Yan,et al.  Multiwalled carbon nanotubes–V2O5 integrated composite with nanosized architecture as a cathode material for high performance lithium ion batteries , 2013 .

[121]  K. Du,et al.  A novel method for preparation of LiNi1/3Mn1/3Co1/3O2 cathode material for Li-ion batteries , 2013 .

[122]  Chaodi Xu,et al.  Metal-organic framework derived porous ternary ZnCo2O4 nanoplate arrays grown on carbon cloth as binder-free electrodes for lithium-ion batteries , 2018, Chemical Engineering Journal.

[123]  Q. Yan,et al.  Scalable Synthesis of Honeycomblike V2O5/Carbon Nanotube Networks as Enhanced Cathodes for Lithium-Ion Batteries. , 2017, ACS applied materials & interfaces.

[124]  P. Ajayan,et al.  LiNi₁/₃Co₁/₃Mn₁/₃O₂-graphene composite as a promising cathode for lithium-ion batteries. , 2011, ACS applied materials & interfaces.

[125]  Shengbo Zhang.  A review on the separators of liquid electrolyte Li-ion batteries , 2007 .

[126]  Byungwoo Park,et al.  Novel LiCoO2 Cathode Material with Al2O3 Coating for a Li Ion Cell , 2000 .

[127]  Pu Chen,et al.  Reality and Future of Rechargeable Lithium Batteries , 2011 .

[128]  Ki-won Kim,et al.  A Surfactant-based Method for Carbon Coating of LiNi0.8Co0.15Al0.05O2 Cathode in Li Ion Batteries , 2010 .

[129]  Taewook Kang,et al.  Design of a Porous Cathode for Ultrahigh Performance of a Li-ion Battery: An Overlooked Pore Distribution , 2017, Scientific Reports.

[130]  Arumugam Manthiram,et al.  Factors Controlling the Fluorine Content and the Electrochemical Performance of Spinel Oxyfluoride Cathodes , 2007 .

[131]  Xiaodong Zhu,et al.  Facile and elegant self-organization of Ag nanoparticles and TiO2 nanorods on V2O5 nanosheets as a superior cathode material for lithium-ion batteries , 2016 .

[132]  Jeffrey W. Fergus,et al.  Recent developments in cathode materials for lithium ion batteries , 2010 .

[133]  M. Ge,et al.  Graphene-oxide-coated LiNi0.5Mn1.5O4 as high voltage cathode for lithium ion batteries with high energy density and long cycle life , 2013 .

[134]  Zhen-guo Wu,et al.  Construction of homogeneously Al3+ doped Ni rich Ni-Co-Mn cathode with high stable cycling performance and storage stability via scalable continuous precipitation , 2018, Electrochimica Acta.

[135]  C. Yoon,et al.  Structural Stability of LiNiO2 Cycled above 4.2 V , 2017 .

[136]  Xixi Shi,et al.  Study of new phases grown on LiNbO3 coated LiCoO2 cathode material with an enhanced electrochemical performance , 2015 .

[137]  John B Goodenough,et al.  The Li-ion rechargeable battery: a perspective. , 2013, Journal of the American Chemical Society.

[138]  R. Holze,et al.  Cathode materials modified by surface coating for lithium ion batteries , 2006 .

[139]  J. Duh,et al.  LiCoO2 Cathode Material Coated with Nano-Crystallized ZnO by Sol-Gel Method , 2004 .

[140]  C. Cong,et al.  A soft chemistry synthesis and electrochemical properties of LiV3O8 as cathode material for lithium secondary batteries , 2005 .

[141]  Danna Qian,et al.  Recent progress in cathode materials research for advanced lithium ion batteries , 2012 .

[142]  Lei Zhang,et al.  Recent progress in advanced electrode materials, separators and electrolytes for lithium batteries , 2018 .

[143]  Hyeji Park,et al.  Anode Design Based on Microscale Porous Scaffolds for Advanced Lithium Ion Batteries , 2017, Journal of Electronic Materials.

[144]  Shaomin Li,et al.  Design of a 3D-Porous Structure with Residual Carbon for High-Performance Ni-Rich Cathode Materials. , 2018, ACS applied materials & interfaces.

[145]  Y. Orikasa,et al.  Effects of ZrO2 Coating on LiCoO2 Thin-Film Electrode Studied by In Situ X-ray Absorption Spectroscopy , 2013 .

[146]  Li Zhang,et al.  Research on the Heating Plan of Recovering Condensing Heat of Power Plant by Water Source Heat Pump Unit , 2012 .

[147]  Jaephil Cho,et al.  The Effect of a Metal-Oxide Coating on the Cycling Behavior at 55°C in Orthorhombic LiMnO2 Cathode Materials , 2002 .

[148]  Heliang Yao,et al.  Template-free formation of various V2O5 hierarchical structures as cathode materials for lithium-ion batteries , 2017 .

[149]  Dean J. Miller,et al.  Effectively suppressing dissolution of manganese from spinel lithium manganate via a nanoscale surface-doping approach , 2014, Nature Communications.

[150]  Zaiping Guo,et al.  V2O5/Mesoporous Carbon Composite as a Cathode Material for Lithium-ion Batteries , 2015 .

[151]  K. Abraham,et al.  A high rate Li-rich layered MNC cathode material for lithium-ion batteries , 2015 .

[152]  P. Bruce,et al.  Nanomaterials for rechargeable lithium batteries. , 2008, Angewandte Chemie.

[153]  Hong-li Bai,et al.  ZnO-coated LiMn2O4 cathode material for lithium-ion batteries synthesized by a combustion method , 2016, Ionics.

[154]  Siyuan Li,et al.  Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries , 2018, Nature Communications.

[155]  Gary W. Rubloff,et al.  Electrochemical performance of the nanostructured biotemplated V2O5 cathode for lithium-ion batteries , 2012 .

[156]  Wensheng Yang,et al.  Ultralong single crystalline V2O5 nanowire/graphene composite fabricated by a facile green approach and its lithium storage behavior , 2011 .

[157]  M. Whittingham,et al.  Lithium batteries and cathode materials. , 2004, Chemical reviews.

[158]  J. Choi,et al.  Extremely stable cycling of ultra-thin V2O5 nanowire-graphene electrodes for lithium rechargeable battery cathodes , 2012 .

[159]  Jaephil Cho,et al.  Zero-Strain Intercalation Cathode for Rechargeable Li-Ion Cell , 2001 .

[160]  I. Oh,et al.  Recent Progress in Multifunctional Graphene Aerogels , 2016, Front. Mater..

[161]  D. Linden.  Handbook Of Batteries , 2001 .

[162]  Xiaodong Zhu,et al.  Boosting High‐Rate Lithium Storage of V2O5 Nanowires by Self‐Assembly on N‐Doped Graphene Nanosheets , 2016 .

[163]  M. Doeff,et al.  Electrochemical Characteristics of Layered Transition Metal Oxide Cathode Materials for Lithium Ion Batteries: Surface, Bulk Behavior, and Thermal Properties. , 2018, Accounts of chemical research.

[164]  Bing Sun,et al.  Soft-template synthesis of 3D porous graphene foams with tunable architectures for lithium-O2 batteries and oil adsorption applications , 2014 .

[165]  J. Goodenough,et al.  Monodisperse porous LiFePO4 microspheres for a high power Li-ion battery cathode. , 2011, Journal of the American Chemical Society.

[166]  Z. Wen,et al.  Improvement of the high-rate discharge properties of LiCoO2 with the Ag additives , 2005 .

[167]  M. Biener,et al.  Structural optimization of 3D porous electrodes for high-rate performance lithium ion batteries. , 2015, ACS nano.

[168]  Bingan Lu,et al.  Graphene Nanoribbons on Highly Porous 3D Graphene for High‐Capacity and Ultrastable Al‐Ion Batteries , 2017, Advanced materials.

[169]  Kai-Xue Wang,et al.  Surface and Interface Engineering of Electrode Materials for Lithium‐Ion Batteries , 2015, Advanced materials.

[170]  H. Xin,et al.  Self-assembled V2O5 nanosheets/reduced graphene oxide hierarchical nanocomposite as a high-performance cathode material for lithium ion batteries , 2013 .

[171]  Yang-Kook Sun,et al.  Synthesis and electrochemical properties of ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V cathode material for lithium secondary batteries , 2002 .

[172]  Xiao-dong Guo,et al.  Controlled synthesis of nickel-rich layered oxide cathodes with preferentially exposed {010} active facets for high rate and long cycling stable lithium-ion batteries , 2019, Journal of Alloys and Compounds.

[173]  Jinyun Liu,et al.  Three-Dimensionally Porous Li-Ion and Li-S Battery Cathodes: A Mini Review for Preparation Methods and Energy-Storage Performance , 2019, Nanomaterials.

[174]  Jaephil Cho,et al.  Flexible Dimensional Control of High‐Capacity Li‐Ion‐Battery Anodes: From 0D Hollow to 3D Porous Germanium Nanoparticle Assemblies , 2010, Advanced materials.

[175]  Xianyou Wang,et al.  Electrochemical characterization of a LiV3O8–polypyrrole composite as a cathode material for lithium ion batteries , 2011 .

[176]  H. Fei,et al.  Graphene nanoribbon/V2O5 cathodes in lithium-ion batteries. , 2014, ACS applied materials & interfaces.

[177]  Ying Wan,et al.  Ordered mesoporous non-oxide materials. , 2011, Chemical Society reviews.

[178]  Bo Liu,et al.  Lithium and lithium ion batteries for applications in microelectronic devices: A review , 2015 .

[179]  Zhenda Lu,et al.  Porous monodisperse V2O5 microspheres as cathode materials for lithium-ion batteries , 2011 .

[180]  Glenn G. Amatucci,et al.  Optimization of Insertion Compounds Such as LiMn2 O 4 for Li-Ion Batteries , 2002 .

[181]  Hao Zhang,et al.  A High‐Capacity O2‐Type Li‐Rich Cathode Material with a Single‐Layer Li2MnO3 Superstructure , 2018, Advanced materials.

[182]  Afriyanti Sumboja,et al.  Flexible and Highly Scalable V2O5‐rGO Electrodes in an Organic Electrolyte for Supercapacitor Devices , 2014 .

[183]  Seong‐Min Bak,et al.  Strategies to curb structural changes of lithium/transition metal oxide cathode materials & the changes’ effects on thermal & cycling stability , 2015 .

[184]  Sanghyuk Park,et al.  Nanowire-Like Copper Oxide Grown on Porous Copper, a Promising Anode Material for Lithium-Ion Battery , 2017 .