FEM study of metal sheets with a texture based, local description of the yield locus

[1]  E. Nakamachi,et al.  Study of Texture Effect on Sheet Failure in a Limit Dome Height Test by Using Elastic/Crystalline Viscoplastic Finite Element Analysis , 1997 .

[2]  Albert Van Bael,et al.  Anisotropic finite element analysis based on texture, numerical simulation of 3-D sheet metal forming processes - Verification of simulations with experiments , 1996 .

[3]  R. Hill,et al.  CXXVIII. A theoretical derivation of the plastic properties of a polycrystalline face-centred metal , 1951 .

[4]  P. Van Houtte,et al.  A Comprehensive Mathematical Formulation of an Extended Taylor–Bishop–Hill Model Featuring Relaxed Constraints, the Renouard–WintenbergerTheory and a Strain Rate Sensitivity Model , 1988 .

[5]  A. Reuss,et al.  Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle . , 1929 .

[6]  S. Nikolov,et al.  A micro/macro constitutive model for the small-deformation behavior of polyethylene , 2000 .

[7]  H. Bruneel,et al.  Simulation of square-cup deep-drawing with different finite elements , 1995 .

[8]  O. Bruhns,et al.  Large strain responses of elastic-perfect plasticity and kinematic hardening plasticity with the logarithmic rate: Swift effect in torsion , 2001 .

[9]  U. F. Kocks,et al.  Mechanisms responsible for texture development in a 5182 aluminum alloy deformed at elevated temperature , 1998 .

[10]  P. J. Maudlin,et al.  An application of multisurface plasticity theory: Yield surfaces of textured materials , 1995 .

[11]  Serge Moto Mpong,et al.  A Parallel Computing Model for the Acceleration of a Finite Element Software , 2002, ISHPC.

[12]  L. Anand,et al.  An approximate procedure for predicting the evolution of crystallographic texture in bulk deformation processing of fcc metals , 1992 .

[13]  P. Van Houtte,et al.  Large strain work hardening and textures , 1980 .

[14]  Lallit Anand,et al.  Constitutive Modeling of Polycrystalline Metals at Large Strains , 1997 .

[15]  Paul Van Houtte,et al.  Application of an anisotropic yield locus based on texture to a deep drawing simulation , 1995 .

[16]  E. Schulson,et al.  Recrystallization and Grain Growth in NiAl , 1982 .

[17]  S. Bouvier,et al.  Anisotropic work-hardening behaviour of structural steels and aluminium alloys at large strains , 2003 .

[18]  P. Franciosi.  On flow and work hardening expression correlations in metallic single crystal plasticity , 1988 .

[19]  Stéphane Frénois,et al.  Modélisation polycristalline du comportement mécanique du tantale : application à la mise en forme par hydroformage , 2001 .

[20]  P. Houtte.  Formulation of an Extended Taylor-Bishop-Hill Model Featuring Relaxed Constraints, , 1988 .

[21]  Surya R. Kalidindi,et al.  On the accuracy of the predictions of texture evolution by the finite element technique for fcc polycrystals , 1998 .

[22]  Forming limit predictions with the perturbation method using stress potential functions of polycrystal viscoplasticity , 1996 .

[23]  R. Hill.  A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[24]  P. Dawson,et al.  Deformation Process Simulations Using Polycrystal Plasticity , 1997 .

[25]  L. Tabourot,et al.  Analysis of a criterion of deep drawing operation capability for thin orthotropic sheets , 1998 .

[26]  P. Houtte,et al.  QUANTITATIVE PREDICTION OF COLD ROLLING TEXTURES IN LOW-CARBON STEEL BY MEANS OF THE LAMEL MODEL , 1999 .

[27]  Laurent Duchene.  Implementation of a yield locus interpolation method in the finite element code LAGAMINE , 2000 .

[28]  J. Jonas,et al.  The inverse swift effect: experiments and theory , 1998 .

[29]  Serge Cescotto,et al.  Texture evolution during deep-drawing processes , 2002 .

[30]  Kenneth W. Neale,et al.  University of Groningen Simulation of the behaviour of FCC polycrystals during reversed torsion , 2003 .

[31]  T. Zacharia,et al.  Coupled finite element-Monte Carlo simulation of microstructure and texture evolution during thermomechanical processing , 1998 .

[32]  T. Zacharia,et al.  Polycrystal Simulations of Texture Evolution during Deformation Processing , 1998 .

[33]  P. Van Houtte,et al.  Application of a Texture‐Based Plastic Potential in Earing Prediction of an IF Steel , 2001 .

[34]  W. Voigt,et al.  Lehrbuch der Kristallphysik , 1966 .

[35]  U. F. Kocks,et al.  Application of polycrystal plasticity to sheet forming , 1994 .

[36]  Robert Charlier,et al.  Numerical approach of contact with friction between two bodies in large deformations , 1992 .

[37]  D. McDowell,et al.  The Effect of Stress-State on the Large Strain Inelastic Deformation Behavior of 304L Stainless Steel , 1996 .

[38]  Paul R. Dawson,et al.  On modeling the development of crystallographic texture in bulk forming processes , 1989 .

[39]  J. Jonas,et al.  Textures induced by tension and deep drawing in low carbon and extra low carbon steel sheets , 1993 .

[40]  H. Bunge.  Texture Analysis in Materials Science , 1982 .

[41]  W. Swift,et al.  Length Changes in Metals Under Torsional Overstrain , 1947 .

[42]  Y. Y. Zhu,et al.  Transient thermal and thermomechanical analysis by mixed FEM , 1994 .

[43]  Robert Charlier,et al.  Numerical Approach of Contact Using an Augmented Lagrangian Method , 1995 .

[44]  Lallit Anand,et al.  Macroscopic shape change and evolution of crystallographic texture in pre-textured FCC metals , 1994 .

[45]  Han-chin Wu.  On finite plastic deformation of anisotropic metallic materials , 2003 .

[46]  P. Cheng,et al.  An anisotropic elastic-plastic constitutive model for single and polycrystalline metals. I-theoretical developments , 1996 .

[47]  Cristian Teodosiu,et al.  Large plastic deformation of crystalline aggregates , 1997 .

[48]  Anne Habraken,et al.  Validation of a FEM model coupled with texture applied to deep drawing process , 2000 .

[49]  P. Dawson,et al.  The evolution of crystalline stresses of a polycrystalline metal during cyclic loading , 2002 .

[50]  M. Berveiller,et al.  Modeling of the Plastic Behavior of Inhomogeneous Media , 1984 .

[51]  Paul Van Houtte,et al.  DISCRETIZATION TECHNIQUES FOR ORIENTATION DISTRIBUTION FUNCTIONS , 1992 .

[52]  A. Mortensen,et al.  Swift and inverse Swift effect in alumina fiber reinforced aluminum wires , 2000 .

[53]  G. Sachs,et al.  Zur Ableitung einer Fließbedingung , 1929 .

[54]  P. Houtte,et al.  Application of the Lamel model for simulating cold rolling texture in molybdenum sheet , 2002 .

[55]  L. Delannay.  Prediction of intergranular strains in cubic metals using a multisite elastic-plastic model , 2002 .

[56]  Surya R. Kalidindi,et al.  Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction , 2002 .

[57]  J. Jonas,et al.  Effect of stress-relief annealing on the inverse swift effect in steel and iron , 1995 .

[58]  Serge Cescotto,et al.  Contact between deformable solids: The fully coupled approach , 1998 .

[59]  P. Van Houtte,et al.  Generalization of the relaxed constraints models for the prediction of deformation textures , 1997 .

[60]  David L. McDowell,et al.  Modeling large strain multiaxial effects in FCC polycrystals , 1996 .

[61]  Robert Charlier,et al.  Modélisation du phénomène de contact unilatéral avec frottement dans un contexte de grandes déformations , 1988 .