The High-Performance Dissipating Frame (HPDF) System for the Seismic Strengthening of RC Existing Buildings

In Italy as well as in other earthquake-prone countries, the large number of existing buildings requiring seismic retrofitting calls for sustainable solutions able to reduce both costs and downtime. To this purpose, in this paper, the High-Performance Dissipating Frame system (HPDF), a new strengthening solution for the seismic rehabilitation of existing buildings, is presented. HPDF is based on external precast reinforced concrete (RC) frames rigidly connected to the existing structures and equipped with shear damper devices in order to provide high dissipation capacity. The proposed solution permits: (i) to increase sustainability through works made up from the outside without removing/demolishing infills/other non-structural components, (ii) rapid execution by adopting precast resisting members mutually restrained with steel connections, and (iii) effectiveness due to shear damper devices able to dissipate a large amount of shaking energy. In the paper, a displacement-based design procedure is proposed and applied to a numerical example.

[1]  Vincenzo Manfredi,et al.  Seismic Strengthening and Energy Efficiency: Towards an Integrated Approach for the Rehabilitation of Existing RC Buildings , 2018 .

[2]  Gian Michele Calvi Choices and Criteria for Seismic Strengthening , 2013 .

[3]  Norman A. Abrahamson,et al.  Damping Scaling Factors for Elastic Response Spectra for Shallow Crustal Earthquakes in Active Tectonic Regions: “Average” Horizontal Component , 2014 .

[4]  Andrew S. Whittaker,et al.  Energy dissipation systems for seismic applications: Current practice and recent developments , 2008 .

[5]  Fabio Mazza,et al.  Displacement-based design procedure of damped braces for the seismic retrofitting of r.c. framed buildings , 2015, Bulletin of Earthquake Engineering.

[6]  B. Dujič,et al.  Seismic Strengthening of Existing Concrete and Masonry Buildings with Crosslam Timber Panels , 2014 .

[7]  G. Santarsiero,et al.  Numerical Evaluation of the Steel Plate Energy Absorption Device (SPEAD) for Seismic Strengthening of RC Frame Structures , 2020 .

[9]  Felice Carlo Ponzo,et al.  Jet-Pacs Project: Dynamic Experimental Tests and Numerical Results Obtained for a Steel Frame Equipped with Hysteretic Damped Chevron Braces , 2012 .

[10]  Peter Fajfar,et al.  A Nonlinear Analysis Method for Performance-Based Seismic Design , 2000 .

[11]  Michael N. Fardis,et al.  fib Bulletin 24. Seismic assessment and retrofit of reinforced concrete buildings , 2003 .

[12]  Luis Ibarra,et al.  Hysteretic models that incorporate strength and stiffness deterioration , 2005 .

[13]  T. Triantafillou,et al.  Combined seismic and energy upgrading of existing reinforced concrete buildings using TRM jacketing and thermal insulation , 2019 .

[14]  Anil K. Chopra,et al.  A modal pushover analysis procedure for estimating seismic demands for buildings , 2002 .

[15]  Frank McKenna,et al.  OpenSees: A Framework for Earthquake Engineering Simulation , 2011, Computing in Science & Engineering.

[16]  Nicola Caterino,et al.  Seismic design and retrofit of frame structures with hysteretic dampers: a simplified displacement-based procedure , 2019, Bulletin of Earthquake Engineering.

[17]  Chiara Passoni,et al.  Design of diagrid exoskeletons for the retrofit of existing RC buildings , 2020, Engineering Structures.

[18]  Julian J. Bommer,et al.  Scaling of spectral displacement ordinates with damping ratios , 2005 .

[19]  Nicola Caterino,et al.  Experimental and analytical characterization of steel shear links for seismic energy dissipation , 2018, Engineering Structures.

[20]  Rui Pinho,et al.  DEVELOPMENT AND VERIFICATION OF A DISPLACEMENT-BASED ADAPTIVE PUSHOVER PROCEDURE , 2004 .

[21]  Mjn Priestley,et al.  VISCOUS DAMPING IN SEISMIC DESIGN AND ANALYSIS , 2005 .

[22]  P. Ricci,et al.  Seismic response of RC buildings during the Mw 6.0 August 24, 2016 Central Italy earthquake: the Amatrice case study , 2019, Bulletin of Earthquake Engineering.