Two-dimensional numerical study of temperature field in an anode supported planar SOFC: Effect of the chemical reaction
暂无分享,去创建一个
George Andreadis | Haddad Djamel | B. Zitouni | George Andreadis | H. Djamel | B. Hocine | A. Hafsia | Zeroual Mostefa | Bariza Zitouni | Ben Moussa Hocine | Abdenebi Hafsia | Zeroual Mostefa
[1] N. Shikazono,et al. Numerical analysis of coupled transport and reaction phenomena in an anode-supported flat-tube solid oxide fuel cell , 2008 .
[2] B. Zitouni,et al. Studying on the increasing temperature in IT-SOFC: Effect of heat sources , 2007 .
[3] K. Kendall,et al. High temperature solid oxide fuel cells : fundamentals, design and applicatons , 2003 .
[4] C. Adjiman,et al. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance , 2004 .
[5] M. Rieu,et al. Modelling of the radiative properties of an opaque porous ceramic layer , 2011 .
[6] Xiongwen Zhang,et al. Numerical study on the thermal characteristics in a tubular solid oxide fuel cell with indirect internal reformer , 2009 .
[7] K. Chetehouna,et al. Temperature field, H2 and H2O mass transfer in SOFC single cell: Electrode and electrolyte thickness effects , 2009 .
[8] Andrei G. Fedorov,et al. Local thermal non-equilibrium effects in porous electrodes of the hydrogen-fueled SOFC , 2006 .
[9] B. Zitouni,et al. Hydrogen consumption and power density in a co-flow planar SOFC , 2009 .
[10] Frano Barbir,et al. PEM Fuel Cells: Theory and Practice , 2012 .
[11] Lijun Li,et al. Numerical study of thermoelectric characteristics of a planar solid oxide fuel cell with direct internal reforming of methane , 2009 .
[12] Guilan Wang,et al. Comparison of heat and mass transfer between planar and MOLB-type SOFCs , 2008 .
[13] Xiongwen Zhang,et al. Numerical study on electric characteristics of solid oxide fuel cells , 2007 .
[14] M. Khaleel,et al. A finite element analysis modeling tool for solid oxide fuel cell development: coupled electrochemistry, thermal and flow analysis in MARC® , 2004 .
[15] A. Chaisantikulwat,et al. Dynamic modelling and control of planar anode-supported solid oxide fuel cell , 2008, Comput. Chem. Eng..
[16] R. Herbin,et al. Three-dimensional numerical simulation for various geometries of solid oxide fuel cells , 1996 .
[17] Shilie Weng,et al. Modeling and simulation of solid oxide fuel cell based on the volume–resistance characteristic modeling technique , 2008 .
[18] D. Haddad,et al. One dimensional transient numerical study of the mass heat and charge transfer in a proton exchange membrane for PEMFC , 2009 .
[19] Andrei Kulikovsky. A simple equation for temperature gradient in a planar SOFC stack , 2010 .
[20] Laura Schaefer,et al. Numerical study of a flat-tube high power density solid oxide fuel cell: Part I. Heat/mass transfer and fluid flow , 2005 .
[21] Andrei G. Fedorov,et al. Radiation heat transfer analysis of the monolith type solid oxide fuel cell , 2003 .
[22] Vincent Heuveline,et al. Performance analysis of a SOFC under direct internal reforming conditions , 2007 .
[23] Xiangyang Zhou,et al. Mathematical analysis of planar solid oxide fuel cells , 2008 .
[24] M. Chnani. Modélisation macroscopique de piles PEFC et SOFC pour l'étude de leur couplage , 2008 .
[25] M. Chyu,et al. Simulation of the chemical/electrochemical reactions and heat/mass transfer for a tubular SOFC in a stack , 2003 .
[26] Kyle J. Daun,et al. Radiation heat transfer in planar SOFC electrolytes , 2006 .