An improved model for meshing characteristics analysis of spur gears considering fractal surface contact and friction

[1]  Hui Ma,et al.  Effects of tooth modifications on the dynamic characteristics of thin-rimmed gears under surface wear , 2020 .

[2]  Hui Ma,et al.  Meshing and dynamic characteristics analysis of spalled gear systems: A theoretical and experimental study , 2020 .

[3]  C. Yuce,et al.  Experimental measurement and numerical validation of single tooth stiffness for involute spur gears , 2020 .

[4]  Bangchun Wen,et al.  Investigation on meshing and dynamic characteristics of spur gears with tip relief under wear fault , 2019, Science China Technological Sciences.

[5]  B. Wen,et al.  Calculation of mesh stiffness of spur gears considering complex foundation types and crack propagation paths , 2019, Mechanical Systems and Signal Processing.

[6]  Zhifeng Liu,et al.  Time-varying stiffness model of spur gear considering the effect of surface morphology characteristics , 2019 .

[7]  Ming Liang,et al.  Dynamical modeling and experimental validation for tooth pitting and spalling in spur gears , 2019, Mechanical Systems and Signal Processing.

[8]  Hong Wang,et al.  Novel mathematical modelling methods of comprehensive mesh stiffness for spur and helical gears , 2018, Applied Mathematical Modelling.

[9]  Anand Parey,et al.  Experimental measurement of mesh stiffness by laser displacement sensor technique , 2018, Measurement.

[10]  Cheng Pan,et al.  Study on dynamic characteristics of spur gear transmission system based on different calculation models of time-varying mesh stiffness , 2018, SCIENTIA SINICA Technologica.

[11]  Huangchao Yu,et al.  A spherical conformal contact model considering frictional and microscopic factors based on fractal theory , 2018, Chaos, Solitons & Fractals.

[12]  Jinwu Xu,et al.  Investigation into the Normal Contact Stiffness of Rough Surface in Line Contact Mixed Elastohydrodynamic Lubrication , 2018 .

[13]  Wei Chen,et al.  Fractal modeling of elastic-plastic contact between three-dimensional rough surfaces , 2018 .

[14]  Yong Qin,et al.  Three new models for evaluation of standard involute spur gear mesh stiffness , 2018 .

[15]  Anand Parey,et al.  Experimental measurement of spur gear mesh stiffness using digital image correlation technique , 2017 .

[16]  Xiaopeng Li,et al.  Influence of surface topography on three-dimensional fractal model of sliding friction , 2017 .

[17]  Tengjiao Lin,et al.  Analytical method for coupled transmission error of helical gear system with machining errors, assembly errors and tooth modifications , 2017 .

[18]  Bangchun Wen,et al.  Time-varying mesh characteristics of a spur gear pair considering the tip-fillet and friction , 2017 .

[19]  Qi Chen,et al.  Research on fractal model of normal contact stiffness between two spheroidal joint surfaces considering friction factor , 2016 .

[20]  Jin Zeng,et al.  An improved analytical method for mesh stiffness calculation of spur gears with tip relief , 2016 .

[21]  Liu Peng,et al.  Research on normal contact stiffness of rough surface considering friction based on fractal theory , 2015 .

[22]  Hui Ma,et al.  Improved time-varying mesh stiffness model of cracked spur gears , 2015 .

[23]  Geng Liu,et al.  A robust model for determining the mesh stiffness of cylindrical gears , 2015 .

[24]  Anand Parey,et al.  Effect of shaft misalignment and friction force on time varying mesh stiffness of spur gear pair , 2015 .

[25]  Hui Ma,et al.  Time-varying mesh stiffness calculation of cracked spur gears , 2014 .

[26]  Anand Parey,et al.  Experimental investigation of spur gear tooth mesh stiffness in the presence of crack using photoelasticity technique , 2013 .

[27]  Omar D. Mohammed,et al.  Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysis , 2013 .

[28]  A. Fernandez del Rincon,et al.  A model for the study of meshing stiffness in spur gear transmissions , 2013 .

[29]  Qun Xia,et al.  A fractal model of normal dynamic parameters for fixed oily porous media joint interface in machine tools , 2013 .

[30]  Kang Huang,et al.  Analysis of Two Ball’s Surface Contact Stress Based on Fractal Theory , 2011 .

[31]  Jen Fin Lin,et al.  A microcontact model developed for sphere- and cylinder-based fractal bodies in contact with a rigid flat surface , 2010 .

[32]  J. Lin,et al.  A modified fractal microcontact model developed for asperity heights with variable morphology parameters , 2010 .

[33]  R. Dwyer-Joyce,et al.  Ultrasonic Measurement for Film Thickness and Solid Contact in Elastohydrodynamic Lubrication , 2010 .

[34]  Yahav Morag,et al.  Resolving the contradiction of asperities plastic to elastic mode transition in current contact models of fractal rough surfaces , 2007 .

[35]  Anette Andersson,et al.  A dynamic model to determine vibrations in involute helical gears , 2003 .

[36]  K. Komvopoulos,et al.  Contact analysis of elastic-plastic fractal surfaces , 1998 .

[37]  B. Bhushan,et al.  Role of Fractal Geometry in Roughness Characterization and Contact Mechanics of Surfaces , 1990 .

[38]  A. Majumdar,et al.  Fractal characterization and simulation of rough surfaces , 1990 .