Compressive strength of composite laminates with delamination-induced interaction of panel and sublaminate buckling modes

Compression After Impact (CAI) strength is critical to the safety and weight of carbon fibre aircraft. In this paper, the standard aerospace industry practice of using separate analyses and tests for panel buckling and CAI strength is challenged. Composite panels with a range of stacking sequences were artificially delaminated and subject to compression testing in a fixture that allowed local sublaminate and global panel buckling modes to interact. Compared to panels without delamination, interaction of buckling modes reduced panel buckling strains by up to 29%. Similarly, compared to delaminated panels restrained against panel buckling, interaction reduced delamination propagation strains by up to 49%. These results are the first to indicate that restriction of interaction during CAI testing is unconservative and therefore potentially unsafe. A novel integration of an analytical Strip model, for sublaminate buckling driven delamination propagation, and a Shanley model, for determining increased local strain due to sublaminate-buckling-induced panel curvature, is used to calculate the reduction in strength due to buckling mode interaction. Assuming a typical sublaminate post to pre-buckling stiffness ratio of 0.65, the difference in integrated model and experimental results is <11% – a level of accuracy that will allow the integrated model to drive initial design studies.

[1]  Paul M. Weaver,et al.  Approximate Solution and Optimum Design of Compression-Loaded, Postbuckled Laminated Composite Plates , 2005 .

[2]  Wolfgang G. Knauss,et al.  Observation of damage growth in compressively loaded laminates , 1983 .

[3]  Richard Butler,et al.  Analysis and Compression Testing of Laminates Optimised for Damage Tolerance , 2009 .

[4]  Shun-Fa Hwang,et al.  Buckling behavior of composite laminates with multiple delaminations under uniaxial compression , 2001 .

[5]  H. Ovesy,et al.  Post-buckling analysis of composite plates containing embedded delaminations with arbitrary shape by using higher order shear deformation theory , 2012 .

[6]  Carl T.F. Ross,et al.  Strength of materials and structures , 1992 .

[7]  F. R. Shanley.  Inelastic Column Theory , 1947 .

[8]  Christophe Bouvet,et al.  Low velocity impact modelling in laminate composite panels with discrete interface elements , 2009 .

[9]  Emile S. Greenhalgh,et al.  The effect of defects on the performance of post-buckled CFRP stringer-stiffened panels , 2003 .

[10]  R. Butler,et al.  The influence of surface ply fibre angle on the compressive strength of composite laminates containing delamination , 2012, The Aeronautical Journal (1968).

[11]  Mustafa Şahin,et al.  Buckling behavior and compressive failure of composite laminates containing multiple large delaminations , 2009 .

[12]  P. Feraboli,et al.  A crack length control scheme for solving nonlinear finite element equations in stable and unstable delamination propagation analysis , 2014 .

[13]  David Kennedy,et al.  VICONOPT: Program for Exact Vibration and Buckling Analysis or Design of Prismatic Plate Assemblies , 1991 .

[14]  Richard Butler,et al.  Nonlinear Modeling of Delaminated Struts , 2003 .

[15]  R. Butler,et al.  Compressive strength following delamination induced interaction of panel and sublaminate buckling , 2012 .

[16]  David Kennedy,et al.  Global buckling of composite plates containing rectangular delaminations using exact stiffness analysis and smearing method , 2014 .

[17]  Leif Asp,et al.  Delamination buckling and growth for delaminations at different depths in a slender composite panel , 2001 .

[18]  S. Sánchez-Sáez,et al.  Compression after impact of thin composite laminates , 2005 .

[19]  H. A. Kim,et al.  Buckling Optimization of Variable Angle Tow Panels Using Exact Strip Models , 2012 .

[20]  Zhangming Wu,et al.  Buckling of VAT plates using energy methods , 2012 .

[21]  H. Ovesy,et al.  Compressional stability behavior of composite plates with through-the-width and embedded delaminations by using first order shear deformation theory , 2011 .

[22]  Nikolaos Kontis,et al.  Compressive strength of delaminated aerospace composites , 2012, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[23]  Olivier Allix,et al.  On a multiscale strategy and its optimization for the simulation of combined delamination and buckling , 2012, 1208.6495.

[24]  Nikolaos Kontis.  Damage tolerance of composite stiffened structures , 2008 .

[25]  H. Suemasu,et al.  Analytical study on low compressive strength of composite laminates with impact damage , 2013 .

[26]  Richard Butler,et al.  Compressive static strength model for impact damaged laminates , 2009 .

[27]  A. E. Giannakopoulos,et al.  A theoretical and experimental investigation of buckling induced delamination growth , 1993 .

[28]  Aniello Riccio,et al.  Delamination buckling and growth phenomena in stiffened composite panels under compression. Part I: An experimental study , 2014 .

[29]  J. Thompson,et al.  Elastic Instability Phenomena , 1984 .