Enhanced ablative resistance of epoxy composites at low loadings of boron nitride nanotubes by the formation of near-graphitic structures

An effect of boron nitride nanotubes (BNNTs) with a low concentration on the ablative resistance of the epoxy matrix was evaluated. A linear ablation rate of a 0.3 wt% BNNT/epoxy composite was notably enhanced by 24.23% compared to neat epoxy. Field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and Raman spectroscopy revealed that it was ascribed to the formation of near-graphite rod structures with much larger diameters than BNNT particles in the non-graphitizable epoxy matrix during the ablation tests, similar to the reports on the MWCNT-containing polymer composites. The results indicate that non-carbon nanotube structures also act as the nucleation sites of graphitization in the polymeric matrix during pyrolysis in an ablation process.

[1]  Gyu Hee Lee,et al.  Improvement of ablation resistance of epoxy composites reinforced with low concentrations of multi walled carbon nanotubes , 2019, Composites Part A: Applied Science and Manufacturing.

[2]  Qian Liu,et al.  Extraordinary improvement of ablation resistance of carbon/phenolic composites reinforced with low loading of graphene oxide , 2018, Composites Science and Technology.

[3]  Cheol-Sang Kim,et al.  Boron nitride nanotubes: synthesis and applications , 2018, Nano Convergence.

[4]  R. Jabra,et al.  Preparation and Ablation Performance of Lightweight Phenolic Composite Material under Oxyacetylene Torch Environment , 2018, Journal of Aerospace Technology and Management.

[5]  Dalbir Singh,et al.  Ablation and Mechanical Characterization of Carbon-Phenolic Nano Composites , 2018 .

[6]  S. Sabagh,et al.  High temperature ablation and thermo-physical properties improvement of carbon fiber reinforced composite using graphene oxide nanopowder , 2017 .

[7]  T. Minton,et al.  Decomposition of Phenolic Impregnated Carbon Ablator (PICA) as a Function of Temperature and Heating Rate. , 2017, ACS applied materials & interfaces.

[8]  Hansang Kim,et al.  Improvement of ablation resistance of phenolic composites reinforced with low concentrations of carbon nanotubes , 2015 .

[9]  F. Yazdani,et al.  Thermal and mechanical properties of phenolic-based composites reinforced by carbon fibres and multiwall carbon nanotubes , 2015 .

[10]  M. Ahmad,et al.  Effect of Multiwall Carbon Nanotubes on the Ablative Properties of Carbon Fiber-Reinforced Epoxy Matrix Composites , 2015 .

[11]  T. Minton,et al.  Pyrolysis of phenolic impregnated carbon ablator (PICA). , 2015, ACS applied materials & interfaces.

[12]  W. Lee,et al.  Ablative and mechanical evaluation of CNT/phenolic composites by thermal and microstructural analyses , 2014 .

[13]  K. Fukuda,et al.  Comparison of thermal deformations of carbon fiber-reinforced phenolic matrix ablators by arc-plasma wind tunnel heating and quasi-static heating , 2014 .

[14]  D. Loy,et al.  Modification of a Phenolic Resin with Epoxy- and Methacrylate-Functionalized Silica Sols to Improve the Ablation Resistance of Their Glass Fiber-Reinforced Composites , 2014 .

[15]  A. K. Tyagi,et al.  High-temperature phase transformation and low friction behaviour in highly disordered turbostratic graphite , 2013 .

[16]  D. Hui,et al.  Improved ablation resistance of carbon–phenolic composites by introducing zirconium diboride particles , 2013 .

[17]  S. Tzeng,et al.  Formation of graphitic rods in carbon/carbon composites reinforced with carbon nanotubes , 2013 .

[18]  K. Kinefuchi,et al.  Experimental investigation on thermochemical phenomena in SiFRP , 2012 .

[19]  J. Kenny,et al.  A nanostructured ablative bulk molding compound: Development and characterization , 2011 .

[20]  M. Endo,et al.  The effect of nanotube alignment on stress graphitization of carbon/carbon nanotube composites , 2009 .

[21]  Frank S. Milos,et al.  Ablation and Thermal Response Program for Spacecraft Heatshield Analysis , 1999 .

[22]  H. Fukuda,et al.  Development of ultra-high temperature testing equipment and some mechanical and thermal properties of advanced carbon/carbon composites , 1995 .

[23]  Z. Laušević,et al.  Mechanical properties and chemistry of carbonization of Phenol formaldehyde resin , 1986 .