Reduction of carbon dioxide emissions by solar water heating systems and passive technologies in social housing

Growing global concern regarding climate change motivates technological studies to minimize environmental impacts. In this context, solar water heating (SWH) systems are notably prominent in Brazil, primarily because of the abundance of solar energy in the country. However, SWH designs have not always been perfectly developed. In most projects, the installation option of the solar system only considers the electric power economy aspects and not the particular characteristics of each climatic zone. Thus, the primary objective of this paper is to assess the potential of carbon dioxide reduction with the use of SWH in comparison with electric showers in social housing in several Brazilian climatic zones. The Brazilian government authorities have created public policies to encourage the use of these technologies primarily among the low-income population. The results of this paper indicate that hot climactic regions demonstrate a low reduction of CO2 emissions with SWH installations. Thus, solar radiation is not useful for water heating in those regions, but it does lead to a large fraction of household cooling loads, implying a demand for electrical energy for air conditioning or requiring the adoption of passive techniques to maintain indoor temperatures below threshold values.

[1]  P. A. Østergaard,et al.  Potential of natural ventilation in temperate countries – A case study of Denmark , 2014 .

[2]  Sharifah Fairuz Syed Fadzil,et al.  The Potential of Shading Devices for Temperature Reduction in High-Rise Residential Buildings in the Tropics , 2011 .

[3]  Fernando Ramos Martins,et al.  Enhancing information for solar and wind energy technology deployment in Brazil , 2011 .

[4]  Fionn Stevenson,et al.  Adaptive comfort in an unpredictable world , 2013 .

[5]  Li Zhu,et al.  Detailed Energy Saving Performance Analyses on Thermal Mass Walls Demonstrated in a Zero Energy House , 2009 .

[6]  Simon Roberts,et al.  Effects of climate change on the built environment , 2008 .

[7]  Ben Ma,et al.  China's transition to green energy systems: The economics of home solar water heaters and their popularization in Dezhou city , 2011 .

[8]  Mattheos Santamouris,et al.  Passive cooling dissipation techniques for buildings and other structures: The state of the art , 2013 .

[9]  Preecha Tummu,et al.  Thermal performance of insulated walls enclosing residential spaces in Thailand , 2013 .

[10]  R. Dear,et al.  Air movement acceptability limits and thermal comfort in Brazil's hot humid climate zone , 2010 .

[11]  K. N. Sheeba,et al.  A comprehensive review on solar water heaters , 2011 .

[12]  M. J. Holmes,et al.  Embodied and operational carbon dioxide emissions from housing: A case study on the effects of thermal mass and climate change , 2008 .

[13]  Claire L. Smith,et al.  Designing urban spaces and buildings to improve sustainability and quality of life in a warmer world , 2008 .

[14]  Md. Rafiqul Islam,et al.  Review on solar water heater collector and thermal energy performance of circulating pipe , 2011 .

[15]  D. Vuuren,et al.  Modeling global residential sector energy demand for heating and air conditioning in the context of climate change , 2009 .

[16]  Shuo Li,et al.  Facade design optimization for naturally ventilated residential buildings in Singapore , 2007 .

[17]  Tianzhen Hong,et al.  Building simulation: an overview of developments and information sources , 2000 .

[18]  Y Zhu,et al.  Progress in thermal comfort research over the last twenty years. , 2013, Indoor air.

[19]  Manoj Kumar Singh,et al.  Solar passive features in vernacular architecture of North-East India , 2011 .

[20]  C. Cruickshank,et al.  Heat loss characteristics for a typical solar domestic hot water storage , 2010 .

[21]  Romeu Vicente,et al.  Numerical evaluation of a phase change material–shutter using solar energy for winter nighttime indoor heating , 2014 .

[22]  James Perkins,et al.  Relative benefits of technology and occupant behaviour in moving towards a more energy efficient, sustainable housing paradigm , 2011 .

[23]  Abdulsalam Ebrahimpour,et al.  Application of advanced glazing and overhangs in residential buildings , 2011 .

[24]  Standard Ashrae.  Thermal Environmental Conditions for Human Occupancy , 1992 .

[25]  Racine Tadeu Araújo Prado,et al.  Optimization of tank and flat-plate collector of solar water heating system for single-family households to assure economic efficiency through the TRNSYS program , 2006 .

[26]  A.L.S. Chan,et al.  Effect of adjacent shading on the thermal performance of residential buildings in a subtropical region , 2012 .

[27]  Michele Zinzi,et al.  Characterization and assessment of cool coloured solar protection devices for Mediterranean residential buildings application , 2012 .

[28]  Jeong Tai Kim,et al.  Comparative advantage of an exterior shading device in thermal performance for residential buildings , 2012 .

[29]  S. L. Abreu,et al.  Scenarios for solar thermal energy applications in Brazil , 2012 .

[30]  Onorio Saro,et al.  Massive Solar-Thermal Collectors: A critical literature review , 2012 .

[31]  Behdad Moghtaderi,et al.  Effect of thermal mass on the thermal performance of various Australian residential constructions systems , 2008 .

[32]  David E. Mills.  Assessing solar hot water system performance with GIS , 2004 .

[33]  Y. L. Nimir,et al.  Experimental and theoretical evaluation of the performance of a tar solar water heater , 2003 .

[34]  Chi-Hsiang Wang,et al.  Cooling energy consumption and reduction effect for residential buildings in South East Queensland, Australia , 2013 .

[35]  Zia Ud Din,et al.  Phase change material (PCM) storage for free cooling of buildings—A review , 2013 .

[36]  Vanessa Montoro Taborianski,et al.  Comparative evaluation of the contribution of residential water heating systems to the variation of greenhouse gases stock in the atmosphere , 2004 .

[37]  F. Nicol,et al.  Derivation of the adaptive equations for thermal comfort in free-running buildings in European standard EN15251 , 2010 .

[38]  Detlef P. van Vuuren,et al.  Model projections for household energy use in developing countries , 2012 .

[39]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[40]  H. Akbari,et al.  Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditions , 2007 .

[41]  Soteris A. Kalogirou,et al.  Energy analysis of buildings employing thermal mass in Cyprus , 2002 .

[42]  Jürgen P. Kropp,et al.  Heating and cooling energy demand and related emissions of the German residential building stock under climate change , 2011 .

[43]  Anna Laura Pisello,et al.  The thermal effect of an innovative cool roof on residential buildings in Italy: Results from two years of continuous monitoring , 2014 .

[44]  K. Pavlou,et al.  Recent progress on passive cooling techniques: Advanced technological developments to improve survivability levels in low-income households , 2007 .

[45]  Racine Tadeu Araújo Prado,et al.  Water heating through electric shower and energy demand , 1998 .

[46]  S. Tassou,et al.  Measures used to lower building energy consumption and their cost effectiveness , 2002 .

[47]  Arild Gustavsen,et al.  The path to the high performance thermal building insulation materials and solutions of tomorrow , 2010 .

[48]  Baruch Givoni,et al.  Comfort, climate analysis and building design guidelines , 1992 .

[49]  K. Pavlou,et al.  On the efficiency of night ventilation techniques applied to residential buildings , 2010 .