Trigeneration Primary Energy Saving Evaluation for Energy Planning and Policy Development

Abstract Trigeneration or combined heat, cooling and power (CHCP) is becoming an increasingly important energy option, particularly on a small-scale basis (below 1 MWe), with several alternatives nowadays available for the cooling power production and the coupling to cogeneration systems. This paper deals with the introduction of a suitable framework for assessing the energy saving performance of trigeneration alternatives, orientated towards energy planning studies and the development of regulatory policies. In particular, a new generalized performance indicator—the trigeneration primary energy saving (TPES)—is introduced and discussed, with the aim of effectively evaluating the primary energy savings from different CHCP alternatives. The potential of the TPES indicator is illustrated through specific analyses run over different combinations of trigeneration equipment, providing numerical examples based on time-domain simulations to illustrate the dependence of the energy saving characteristics on the CHCP system configurations and equipment, as well as on the loading levels. In addition, the key aspect of adequately establishing the reference efficiencies for the conventional separate production of electrical, thermal and cooling power is addressed in detail. This aspect affects both equipment selection and potential profitability of the considered solutions under the outlook of receiving financial incentives.

[1]  Piero Colonna,et al.  Industrial trigeneration using ammonia–water absorption refrigeration systems (AAR) , 2003 .

[2]  Neil Strachan,et al.  Distributed generation and distribution utilities , 2002 .

[3]  Pepin Magloire Tchouate Heteu,et al.  Economie d'énergie en trigénération , 2002 .

[4]  Adwin Martens,et al.  The energetic feasibility of CHP compared to the separate production of heat and power , 1998 .

[5]  Woodrow W. Clark,et al.  A green hydrogen economy , 2006 .

[6]  Graeme Maidment,et al.  The use of CHP and absorption cooling in cold storage , 2000 .

[7]  Yunho Hwang,et al.  Potential energy benefits of integrated refrigeration system with microturbine and absorption chiller , 2004 .

[8]  I. Weintraub.  Energy Efficiency Manual , 2000 .

[9]  Antonio Piacentino,et al.  Cogeneration: a regulatory framework toward growth , 2005 .

[10]  V Havelský,et al.  Energetic efficiency of cogeneration systems for combined heat, cold and power production , 1999 .

[11]  W. McDowall,et al.  Forecasts, scenarios, visions, backcasts and roadmaps to the hydrogen economy: A review of the hydrogen futures literature , 2006 .

[12]  Antonio Piacentino,et al.  A methodology for sizing a trigeneration plant in mediterranean areas , 2003 .

[13]  Pierluigi Mancarella.  From cogeneration to trigeneration: energy planning and evaluation in a competitive market framework , 2006 .

[14]  Jan F. Kreider,et al.  Handbook of Heating, Ventilation, and Air Conditioning , 2000 .

[15]  G. Chicco,et al.  Planning aspects and performance indicators for small-scale trigeneration plants , 2005, 2005 International Conference on Future Power Systems.

[16]  Walter G. Scott,et al.  Distributed Power Generation Planning and Evaluation , 2000 .

[17]  P.G.M. Boonekamp,et al.  Evaluation of methods used to determine realized energy savings , 2006 .

[18]  I. B. Fridleifsson,et al.  Renewable Energy Technologies , 2000 .

[19]  G. Chicco,et al.  From cogeneration to trigeneration: profitable alternatives in a competitive market , 2006, IEEE Transactions on Energy Conversion.

[20]  R. Schneider,et al.  Trigeneration in the food industry , 2002 .

[21]  Neil Strachan,et al.  Emissions from distributed vs. centralized generation: the importance of system performance , 2006 .

[22]  K. R. Voorspools,et al.  The impact of the implementation of cogeneration in a given energetic context , 2002 .

[23]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part II: cool thermal storage , 1998 .

[24]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .