Reliability and Modal Analysis of Key Meta-Action Unit for CNC Machine Tool

Dynamic characteristics have an important impact on the reliability of computer numerical control (CNC) machine tool. As the basis of dynamic characteristics analysis, the modal analysis should be conducted. However, the current modal analysis methods have some shortcomings. For example, the selected research object cannot reflect the dynamic characteristics of the CNC machine tool, the selection of research object lacks a scientific basis, and the influence of coupling factors is also often ignored. To address these problems, the concepts of meta-action failure mode and the latest research results about meta-action were given herein. Meta-action unit is the smallest structural unit to ensure the normal operation of the machine tool, and it can fully reflect the dynamic characteristics of a machine tool, so it is taken as the research object. In order to reduce the blindness of selecting the analytic object when implementing the reliability improvement measures, we put forward the concept of a key meta-action unit and gave the corresponding extraction method. Meanwhile, electromechanical coupling was considered when built the dynamic model of a key meta-action unit. A CNC machine tool made in China was taken as an example, and a key meta-action unit was extracted and analyzed, then the corresponding reliability improvement measures were also given. The results verify the applicability and effectiveness of this method. The proposed method can solve the shortcomings of the current methods, which lays a foundation for further research of mechanical properties and reliability based on machine tool meta-action unit.

[1]  W. Thomson.  Theory of vibration with applications , 1965 .

[2]  Steven D. Eppinger,et al.  Organizing the Tasks in Complex Design Projects , 1991, MIT-JSME Workshop.

[3]  Lu Yue.  Weight Calculation Method of Fuzzy Analytical Hierarchy Process , 2002 .

[4]  Alfred J.D. Lambert,et al.  Disassembly Modeling for Assembly, Maintenance, Reuse and Recycling , 2004 .

[5]  Cheng-Chi Wang,et al.  Performance analysis of high-speed spindle aerostatic bearings , 2005 .

[6]  Jian-Bo Yang,et al.  On the centroids of fuzzy numbers , 2006, Fuzzy Sets Syst..

[7]  Carlo Vezzoli,et al.  Life Cycle Design: from general methods to product type specific guidelines and checklists: a method adopted to develop a set of guidelines/checklist handbook for the eco-efficient design of NECTA vending machines , 2006 .

[8]  Ahmad Kamal Ariffin,et al.  Finite element simulation of stress intensity factors in elastic-plastic crack growth , 2006 .

[9]  Dong Wang,et al.  Modeling of contact surface morphology and dust particles by using finite element method , 2007 .

[10]  Robert G. Parker,et al.  Nonlinear Dynamics of Planetary Gears Using Analytical and Finite Element Models , 2007 .

[11]  Jian-Bo Yang,et al.  Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean , 2009, Expert Syst. Appl..

[12]  Yong Wang,et al.  Assembly Unit Partitioning for Collaborative Assembly Planning , 2009 .

[13]  Zhao Zhen.  Finite element simulation analysis integrated information model based on design reuse , 2009 .

[14]  Liu Liguo.  Method of Determining Weights of Subjective Evaluation Indexes for Car Handling and Stability Based on Fuzzy Analytic Hierarchy Process , 2011 .

[15]  Bin Li,et al.  Simulation of Dynamic Characteristic for Parallel Machine Tool , 2011 .

[16]  Carl S. Carlson,et al.  Failure Mode Effects and Criticality Analysis (FMECA) , 2012 .

[17]  Zhang Genbao,et al.  Fault Diagnosis Study of Complex Mechanism Based on FMA Function Decomposition Model , 2015 .

[18]  Hong Xu,et al.  Dynamic Analysis and Optimization of WEDM Based on AWE and LMS , 2015 .

[19]  Dongying Li,et al.  Mechanism Analysis of Deviation Sourcing and Propagation for Meta-action Assembly Unit , 2015 .

[20]  Hui Guo,et al.  Reliability analysis on the drive system of a gear-type oil pump with variable displacement , 2016 .

[21]  Yan Ran,et al.  Quality characteristic association analysis of computer numerical control machine tool based on meta-action assembly unit , 2016 .

[22]  Shiwei Zhou,et al.  A finite-element approach to evaluating the size effects of complex nanostructures , 2016, Royal Society Open Science.

[23]  Xuesong Wei,et al.  A coupling vibration model of multi-stage pump rotor system based on FEM , 2016 .

[24]  Yan-bin Du,et al.  Failure Mode, Effects and Criticality Analysis of remanufactured machine tools in service , 2017 .

[25]  Yinglong Chen,et al.  Nonlinear Dynamics Modeling and Analysis of Underwater Mud-Penetrator Steering System , 2018, IEEE Access.

[26]  A. Qureshi,et al.  Supplementary material from "Finite-element analysis of microwave scattering from a three-dimensional human head model for brain stroke detection" , 2018 .

[27]  Zhaobo Chen,et al.  Dynamic Analysis of Helical Gears With Sliding Friction and Gear Errors , 2018, IEEE Access.

[28]  Jieqiong Lin,et al.  Modeling and Analysis of a Novel Decoupled Vibration-Assisted Swing Cutting System for Micro/Nano-Machining Surface , 2018, IEEE Access.