Numerical solution of solar air heater with triangular corrugations for indirect solar dryer: Influence of pitch and an optimized pitch of corrugation for enhanced performance

[1]  Azim Doğuş Tuncer,et al.  Energy and exergy analysis of a vertical solar air heater with nano-enhanced absorber coating and perforated baffles , 2022, Renewable Energy.

[2]  A. Yadav,et al.  Thermo-hydraulic and exergetic performance of a cost-effective solar air heater: CFD and experimental study , 2021, Renewable Energy.

[3]  Azim Doğuş Tuncer,et al.  Experimental and numerical analysis of a compact indirect solar dehumidification system , 2021 .

[4]  V. Lakhera,et al.  Thermo-hydraulic performance analysis of a solar air heater roughened with discrete reverse NACA profile ribs , 2021 .

[5]  V. Chandramohan,et al.  Numerical investigation on solar air collector and its practical application in the indirect solar dryer for banana chips drying with energy and exergy analysis , 2021, Thermal Science and Engineering Progress.

[6]  Azim Doğuş Tuncer,et al.  Energy-exergy and sustainability analysis of a PV-driven quadruple-flow solar drying system , 2021 .

[7]  Azim Doğuş Tuncer,et al.  Energy and exergy analysis of a photovoltaic thermal (PVT) system used in solar dryer: A numerical and experimental investigation , 2021 .

[8]  V. Raju,et al.  Experimental Investigation of Drying Kinetics of Green Chilli and Okra using Indirect Solar Dryer with Evaluation of Dryer Performance , 2021, International Journal of Ambient Energy.

[9]  V. Chandramohan,et al.  Energy and exergy analysis of forced and natural convection indirect solar dryers: Estimation of exergy inflow, outflow, losses, exergy efficiencies and sustainability indicators from drying experiments , 2020 .

[10]  Sachin Kumar,et al.  Computational and experimental studies on the development of an energy-efficient drier using ribbed triangular duct solar air heater , 2020, Solar Energy.

[11]  A. Gungor,et al.  Energetic, environmental and economic analysis of drying municipal sewage sludge with a modified sustainable solar drying system , 2020 .

[12]  M. Smyth,et al.  Effect of the absorber surface roughness on the performance of a solar air collector: An experimental investigation , 2020, Renewable Energy.

[13]  Ali Amini,et al.  Thermal performance analysis of a quadruple-pass solar air collector assisted pilot-scale greenhouse dryer , 2020 .

[14]  A. Benzaoui,et al.  3D numerical investigation of convective heat transfer and friction in solar air collector's channel roughened by triangular ribs , 2019, TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES19Gr.

[15]  Shi-jun You,et al.  A comparative study on the performance of liquid flat-plate solar collector with a new V-corrugated absorber , 2019, Energy Conversion and Management.

[16]  V. Raju,et al.  Numerical analysis on solar air collector provided with artificial square shaped roughness for indirect type solar dryer , 2018, Journal of Cleaner Production.

[17]  G. N. Tiwari,et al.  Environ economic analysis of various types of photovoltaic technologies integrated with greenhouse solar drying system , 2017 .

[18]  Nabil A.S. Elminshawy,et al.  Design and performance improvement of a solar desalination system by using solar air heater: Experimental and theoretical approach , 2016 .

[19]  A. Mujumdar,et al.  Improving exergetic performance parameters of a rotating-tray air dryer via a simple heat exchanger , 2016 .

[20]  A. S. Dhoble,et al.  Experimental and CFD-based thermal performance prediction of solar air heater provided with chamfered square rib as artificial roughness , 2016 .

[21]  Adel Benchabane,et al.  Solar drying of henna (Lawsonia inermis) using different models of solar flat plate collectors: an experimental investigation in the region of Biskra (Algeria) , 2016 .

[22]  J. Saini,et al.  Experimental Investigation of Enhanced Heat Transfer and Pressure Drop in a Solar Air Heater Duct With Discretized Broken V-Rib Roughness , 2015 .

[23]  R. P. Saini,et al.  Effect of roughness width ratio in discrete Multi v-shaped rib roughness on thermo-hydraulic performance of solar air heater , 2015 .

[24]  F. Chabane,et al.  Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater , 2013, Journal of advanced research.

[25]  A. N. Tikekar,et al.  Analysis of fluid flow and heat transfer in a rib grit roughened surface solar air heater using CFD , 2010 .

[26]  Mehmet Esen,et al.  Experimental investigation of thermal performance of a double-flow solar air heater having aluminium cans , 2009 .

[27]  Abdulkadir Sengür,et al.  Artificial neural network and wavelet neural network approaches for modelling of a solar air heater , 2009, Expert Syst. Appl..

[28]  Abdulkadir Sengür,et al.  Modelling of a new solar air heater through least-squares support vector machines , 2009, Expert Syst. Appl..

[29]  Atul Sharma,et al.  Solar-energy drying systems: A review , 2009 .

[30]  S. Bopche,et al.  Experimental investigations on heat transfer and frictional characteristics of a turbulator roughened solar air heater duct , 2009 .

[31]  J. Saini,et al.  Experimental investigation on heat-transfer enhancement due to a gap in an inclined continuous rib arrangement in a rectangular duct of solar air heater , 2008 .

[32]  A. N. Tikekar,et al.  Heat transfer and friction factor correlation for artificially roughened duct with metal grit ribs , 2007 .

[33]  Tao Liu,et al.  Analytical and experimental studies on the thermal performance of cross-corrugated and flat-plate solar air heaters , 2007 .

[34]  A. R. Jaurker,et al.  Heat transfer and friction characteristics of rectangular solar air heater duct using rib-grooved artificial roughness , 2006 .

[35]  Je-Chin Han,et al.  Thermal Performance of Angled, V-Shaped, and W-Shaped Rib Turbulators in Rotating Rectangular Cooling Channels (AR=4:1) , 2004 .

[36]  Mohammad Nurul Alam Hawlader,et al.  Development of solar air collectors for drying applications , 2004 .

[37]  Wen-Quan Tao,et al.  Experimental Study on Heat Transfer in Ducts with Winglet Disturbances , 2003 .

[38]  S. C. Solanki,et al.  Heat transfer and friction in solar air heater duct with V-shaped rib roughness on absorber plate , 2002 .

[39]  S. C. Solanki,et al.  Heat transfer coefficient and friction factor correlations for rectangular solar air heater duct having transverse wedge shaped rib roughness on the absorber plate , 2002 .

[40]  R. P. Saini,et al.  Heat transfer and friction factor correlations for artificially roughened ducts with expanded metal mesh as roughness element , 1997 .

[41]  Zhenjun Ma,et al.  Mathematical modelling and experimental investigation of solar air collectors with corrugated absorbers , 2019 .

[42]  A. A. El-Sebaii,et al.  Solar drying of agricultural products: A review , 2012 .

[43]  B. N. Prasad,et al.  Effect of artificial roughness on heat transfer and friction factor in a solar air heater , 1988 .

[44]  K. A. Joudi,et al.  Experimental performance of a solar air heater with a “V” corrugated absorber , 1986 .