Microstructure and formability performance of fiber laser welded 1.2 GPa grade hot-rolled TRIP steel joints

[1]  K. Pańcikiewicz,et al.  Laser Dissimilar Welding of AISI 430F and AISI 304 Stainless Steels , 2020, Materials.

[2]  X. Xu,et al.  Effect of austenite stability on the hole expansion behavior of δ-TRIP steels , 2020 .

[3]  L. Du,et al.  High‐Temperature Deformation Behavior of a Novel Hot‐Rolled Transformation‐Induced Plasticity Alloy: Experiments, Constitutive Modeling, and Processing Maps , 2020, steel research international.

[4]  J. Tomków,et al.  Effect of Electrode Waterproof Coating on Quality of Underwater Wet Welded Joints , 2020, Materials.

[5]  M. Landowski,et al.  Autogenous Fiber Laser Welding of 316L Austenitic and 2304 Lean Duplex Stainless Steels , 2020, Materials.

[6]  M. Zhong,et al.  Formability of Medium Mn Steel Welded Joints , 2020, Metals.

[7]  J. Górka.  Assessment of the Effect of Laser Welding on the Properties and Structure of TMCP Steel Butt Joints , 2020, Materials.

[8]  L. Du,et al.  Structure-property relationship in novel low carbon hot-rolled TRIP steels via thermo-mechanical controlled processing and coiling , 2020 .

[9]  Di Wu,et al.  Effect of matrix structures on TRIP effect and mechanical properties of low-C low-Si Al-added hot-rolled TRIP steels , 2020 .

[10]  A. Malikov,et al.  Microstructure of intercritical heat affected zone and toughness of microalloyed steel laser welds , 2020 .

[11]  F. Goodwin,et al.  Dynamic Tensile Behavior of Fiber Laser Welds of Medium Manganese Transformation-Induced Plasticity Steel , 2019, Metallurgical and Materials Transactions A.

[12]  J. Yang,et al.  Microstructure and mechanical behaviors of GPa-grade TRIP steels enabled by hot-rolling processes , 2019, Materials Science and Engineering: A.

[13]  M. Shome,et al.  Effect of the laser power on the mechanical performance of the laser spot welds in dual phase steels , 2019, Journal of Materials Processing Technology.

[14]  Sarman Singh,et al.  Work hardening behaviour and damage mechanisms in carbide-free bainitic steel during uni-axial tensile deformation , 2019, Materials Science and Engineering: A.

[15]  R. Misra,et al.  Combined thermo-mechanical controlled processing and dynamic carbon partitioning of low carbon Si/Al-Mn steels , 2018, Materials Science and Engineering: A.

[16]  Yun Peng,et al.  Microstructure and mechanical properties of fiber laser welded QP980 steel , 2018, Journal of Materials Processing Technology.

[17]  Ning Wang,et al.  Investigation of forming process of the third-generation automotive medium-Mn steel part with large-fractioned metastable austenite for high formability , 2018 .

[18]  P. Peng,et al.  Microstructural evolution and deformation behavior of fiber laser welded QP980 steel joint , 2018 .

[19]  Wang Xiaonan,et al.  Microstructure and properties in dissimilar/similar weld joints between DP780 and DP980 steels processed by fiber laser welding , 2017 .

[20]  Xiao-nan Wang,et al.  Microstructure and fracture behavior of laser welded joints of DP steels with different heat inputs , 2017 .

[21]  Xianghua Liu,et al.  Comparative study on microstructure and mechanical properties of a C-Mn-Si steel treated by quenching and partitioning (Q&P) processes after a full and intercritical austenitization , 2017 .

[22]  T. Pal,et al.  Effect of nugget size and notch geometry on the high cycle fatigue performance of resistance spot welded DP590 steel sheets , 2016 .

[23]  S. Ghosh,et al.  Effect of partial and full austenitisation on microstructure and mechanical properties of quenching and partitioning steel , 2016 .

[24]  G. Zou,et al.  Microstructure and tensile behavior of fiber laser-welded blanks of DP600 and DP980 steels , 2016 .

[25]  Xuefei Huang,et al.  Microstructure and mechanical properties of a medium-carbon bainitic steel by a novel quenching and dynamic partitioning (Q-DP) process , 2016 .

[26]  S. K. Panda,et al.  Microstructures and failure analyses of DP980 laser welded blanks in formability context , 2016 .

[27]  F. Barlat,et al.  Void coalescence and fracture behavior of notched and un-notched tensile tested specimens in fine grain dual phase steel , 2015 .

[28]  Matteo Rossini,et al.  Investigation on dissimilar laser welding of advanced high strength steel sheets for the automotive industry , 2015 .

[29]  A. Gerlich,et al.  Microstructure-properties correlation in fiber laser welding of dual-phase and HSLA steels , 2014 .

[30]  T. Tsuchiyama,et al.  Difference in transformation behavior between ferrite and austenite formations in medium manganese steel , 2014 .

[31]  F. Goodwin,et al.  Effects of concavity on tensile and fatigue properties in fibre laser welding of automotive steels , 2014 .

[32]  F. Goodwin,et al.  Effects of weld line position and geometry on the formability of laser welded high strength low alloy and dual-phase steel blanks , 2013 .

[33]  H. Pinto,et al.  Induction-assisted laser beam welding of a thermomechanically rolled HSLA S500MC steel: A microstructure and residual stress assessment , 2013 .

[34]  Bing Chen,et al.  The effect of morphology on the stability of retained austenite in a quenched and partitioned steel , 2013 .

[35]  Kebing Zhang,et al.  A new effect of retained austenite on ductility enhancement in high strength bainitic steel , 2012 .

[36]  Seok-Jae Lee,et al.  Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning , 2011 .

[37]  J. D. Boyd,et al.  Effect of microstructure on retained austenite stability and work hardening of TRIP steels , 2011 .

[38]  U. Reisgen,et al.  On formability of tailor laser welded blanks of DP/TRIP steel sheets , 2010 .

[39]  D. Wilkinson,et al.  Void Nucleation and Growth in Dual-Phase Steel 600 during Uniaxial Tensile Testing , 2009 .

[40]  David S. Wilkinson,et al.  Effect of martensite distribution on damage behaviour in DP600 dual phase steels , 2009 .

[41]  S. Panda,et al.  Numerical Simulations and Experimental Results of Tensile Test Behavior of Laser Butt Welded DP980 Steels , 2008 .

[42]  K. F. Russell,et al.  Effect of pre-straining and bake hardening on the microstructure of thermomechanically processed CMnSi TRIP steels with and without Nb and Mo additions , 2008 .

[43]  Y. Zhou,et al.  A Comparative Study of Formability of Diode Laser Welds in DP980 and HSLA Steels , 2007 .

[44]  D. Ponge,et al.  Mechanical properties of an ultrafine grained C-Mn steel processed by warm deformation and annealing , 2005 .

[45]  B. C. De Cooman,et al.  Structure–properties relationship in TRIP steels containing carbide-free bainite , 2004 .

[46]  J. Besson,et al.  Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel , 2004 .

[47]  A. Salminen,et al.  Process diagrams for laser beam welding of carbon manganese steels , 1996 .

[48]  Michael F. Ashby,et al.  A second report on diagrams of microstructure and hardness for heat-affected zones in welds , 1984 .