Tribological properties of epoxy nanocomposites: Part II. A combinative effect of short carbon fibre with nano-TiO2

Abstract In our pervious studies [Z. Zhang, C. Breidt, L. Chang, F. Haupert, K. Friedrich, Enhancement of the wear resistance of epoxy: short carbon fibre, graphite, PTFE and nano-TiO 2 , Composites A 35 (2004) 1385–1392; L. Chang, Z. Zhang, C. Breidt, K. Friedrich, Tribological properties of epoxy nanocomposites. I. Enhancement of the wear resistance by nano-TiO 2 particles, Wear 258 (1–4) (2005) 141–148], wear performances of a series of epoxy-based nanocomposites were systemically investigated by a pin-on-disk apparatus under different sliding conditions. The addition of spherical TiO 2 nanoparticles (300 nm in diameter) was found to be able to apparently reduce the frictional coefficient, and consequently to decrease the contact temperature and wear rate of fibre reinforced epoxy composites. To promote this conclusion, the present paper intends to further understand the wear mechanisms involved in micro- and nanoscales. Based on a scanning electron (SEM) and an atomic force (AFM) microscopy observations of the worn surfaces, a positive rolling effect of the nanoparticles between the material pairs was proposed, which led to the remarkable reduction of the frictional coefficient. In particular, this rolling effect protects the short carbon fibres from more severe wear mechanisms, especially at high sliding pressure and speed situations. In order to validate the assumption proposed, the influence of the counterpart roughness on the wear performance were carried out as well.

[1]  G. Stachowiak,et al.  The Effects of Particle Characteristics on Three-Body Abrasive Wear , 2001 .

[2]  Robert O. Ritchie,et al.  A physically-based abrasive wear model for composite materials , 2002 .

[3]  Zhongya Zhang,et al.  Tribological Characteristics of Micro- and Nanoparticle Filled Polymer Composites , 2005 .

[4]  N. Ohmae,et al.  Chapter 7 - Friction and Wear Performance of Unidirectionally Oriented Glass, Carbon, Aramid and Stainless Steel Fiber-Reinforced Plastics , 1986 .

[5]  John A. Williams,et al.  Mechanisms of abrasive wear in lubricated contacts , 1992 .

[6]  Sidney R. Cohen,et al.  Hollow nanoparticles of WS2 as potential solid-state lubricants , 1997, Nature.

[7]  R. Sayles,et al.  An investigation into the mechanisms of closed three-body abrasive wear , 1994 .

[8]  Zhongya Zhang,et al.  Enhancement of the wear resistance of epoxy: short carbon fibre, graphite, PTFE and nano-TiO2 , 2004 .

[9]  Kishore,et al.  SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers , 2000 .

[10]  Seiichiro Hironaka,et al.  Friction and wear properties of graphite/glassy carbon composites , 2000 .

[11]  J. Gates.  Two-body and three-body abrasion: A critical discussion , 1998 .

[12]  Zhongya Zhang,et al.  Tribological properties of epoxy nanocomposites: I. Enhancement of the wear resistance by nano-TiO2 particles , 2005 .

[13]  R. Tenne,et al.  Tribological properties of WS2 nanoparticles under mixed lubrication , 2003 .

[14]  G. Levita,et al.  Friction and wear of epoxy resin on inox steel: remarks on the influence of velocity, load and induced thermal state , 2001 .

[15]  I. Hutchings,et al.  Effect of Particulate Contamination in Grease-Lubricated Hybrid Rolling Bearings , 1999 .

[16]  S. Bahadur.  The development of transfer layers and their role in polymer tribology , 2000 .

[17]  J. Archard,et al.  The temperature of rubbing bodies; part 2, the distribution of temperatures , 1988 .

[18]  I. Hutchings,et al.  Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test , 1999 .

[19]  Ian M. Hutchings,et al.  Wear-mode mapping for the micro-scale abrasion test , 2003 .

[20]  K. Friedrich.  Wear of Reinforced Polymers by Different Abrasive Counterparts , 1986 .

[21]  J. Xuan,et al.  Hardness Effect on Three-Body Abrasive Wear Under Fluid Film Lubrication , 1989 .