Sulfate Resistance and Microstructure of Metakaolin Geopolymer Reinforced by Cellulose Nanofiber and Wollastonite

[1]  Dan-Chun Hu,et al.  Preparation and fireproofing performance of the wollastonite-metakaolin-based geopolymer foams , 2022, Materials Letters.

[2]  Seongwoo Gwon,et al.  Internal curing of cement composites using kenaf cellulose microfibers , 2021, Journal of Building Engineering.

[3]  Zuhua Zhang,et al.  Thermal stability of geopolymer modified by different silicon source materials prepared from solid wastes , 2021, Construction and Building Materials.

[4]  Xia Li,et al.  Understanding the evolution of cellulose fibers during enzyme treatment , 2021 .

[5]  E. Moffatt,et al.  Efficiency of natural pozzolans, ground glasses and coal bottom ashes in mitigating sulfate attack and alkali-silica reaction , 2021 .

[6]  Surendra P. Shah,et al.  A comparative investigation on the effects of nanocellulose from Bacteria and plant-based sources for cementitious composites , 2021 .

[7]  Qiuqin Lin,et al.  Effects of extraction methods on morphology, structure and properties of bamboo cellulose , 2021 .

[8]  Mei Teng Ban,et al.  Synthesis of hydrogel from sugarcane bagasse extracted cellulose for swelling properties study , 2021, Materials Today: Proceedings.

[9]  D. V. Ribeiro,et al.  Durability and service life analysis of metakaolin-based geopolymer concretes with respect to chloride penetration using chloride migration test and corrosion potential , 2021 .

[10]  Yue Li,et al.  Properties and reaction mechanism of phosphoric acid activated metakaolin geopolymer at varied curing temperatures , 2021 .

[11]  Pooya Saffari,et al.  The effect of mercerization on thermal and mechanical properties of bamboo fibers as a biocomposite material: A review , 2021 .

[12]  Heeyoung Lee,et al.  Damage Detection of Carbon Nanotube Cementitious Composites Using Thermal and Electrical Resistance Properties , 2021, Applied Sciences.

[13]  Changsen Zhang,et al.  Insights to the sulfate resistance and microstructures of alkali-activated metakaolin/slag pastes , 2021 .

[14]  Kai Zhao,et al.  Experimental study on mechanical properties of fiber-reinforced and geopolymer-stabilized clay soil , 2021 .

[15]  P. Yuan,et al.  Realization of high-percentage addition of fly ash in the materials for the preparation of geopolymer derived from acid-activated metakaolin , 2021 .

[16]  Arun Gaur,et al.  Compressive and sorptivity characteristic of concrete modified with wollastonite fibre and waste granite fines , 2021 .

[17]  D. Yan,et al.  The influence of Si/Al ratio on sulfate durability of metakaolin-based geopolymer , 2020 .

[18]  M. Azenha,et al.  Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers , 2020, Construction and Building Materials.

[19]  Mario C. Vélez-Gallego,et al.  Carbon emissions reduction and financial effects of a cap and tax system on an operating supply chain in the cement sector , 2020 .

[20]  Wenzhen Wang,et al.  Effect of wollastonite microfibers as cement replacement on the properties of cementitious composites: A review , 2020 .

[21]  Yuwei Luo,et al.  Hybrid Effect of Wollastonite Fiber and Carbon Fiber on the Mechanical Properties of Oil Well Cement Pastes , 2020, Advances in Materials Science and Engineering.

[22]  Xiaolu Guo,et al.  Resistance of fiber-reinforced fly ash-steel slag based geopolymer mortar to sulfate attack and drying-wetting cycles , 2020 .

[23]  C. Fu,et al.  Alkali cation effects on chloride binding of alkali-activated fly ash and metakaolin geopolymers , 2020 .

[24]  S. Rossignol,et al.  Influence of the wollastonite and glass fibers on geopolymer composites workability and mechanical properties , 2020, Construction and Building Materials.

[25]  Junwei Song,et al.  Hydration properties of Portland cement-copper tailing powder composite binder , 2020 .

[26]  S. J. Owonubi,et al.  Evaluation of mercerization treatment conditions on extracted cellulose from shea nut shell using FTIR and thermogravimetric analysis , 2020 .

[27]  Jeffrey Mahachi,et al.  On the development of sustainable and strong concrete , 2020 .

[28]  V. Bindiganavile,et al.  Enhancing alkali-activation of metakaolin-based geopolymers using dry water , 2020 .

[29]  H. Öz,et al.  The effects of synthetic wollastonite developed with calcite and quartz on high performance mortars , 2020, Structural Concrete.

[30]  Shi-lang Xu,et al.  The mechanical property and frost resistance of roller compacted concrete by mixing silica fume and limestone powder: Experimental study , 2020 .

[31]  J. Nakamatsu,et al.  Natural fibers as reinforcement additives for geopolymers – A review of potential eco-friendly applications to the construction industry , 2020 .

[32]  A. Nazari,et al.  Properties of one-part geopolymer incorporating wollastonite as partial replacement of geopolymer precursor or sand , 2020 .

[33]  Zuhua Zhang,et al.  Sulfate resistance of hybrid fiber reinforced metakaolin geopolymer composites , 2020 .

[34]  V. Bindiganavile,et al.  Cellulose nanofibres (CNF) for sulphate resistance in cement based systems , 2019, Cement and Concrete Composites.

[35]  Marios Soutsos,et al.  Effect of slag content and activator dosage on the resistance of fly ash geopolymer binders to sulfuric acid attack , 2018, Cement and Concrete Research.

[36]  Hans-Carsten Kühne,et al.  Sulfuric acid resistance of one-part alkali-activated mortars , 2018, Cement and Concrete Research.

[37]  Y. Zhiming,et al.  Effects of cellulose, hemicellulose, and lignin on the morphology and mechanical properties of metakaolin-based geopolymer , 2018, Construction and Building Materials.

[38]  Haimiao Yu,et al.  Catalytic gasification characteristics of cellulose, hemicellulose and lignin , 2018, Renewable Energy.

[39]  Z. Ranachowski,et al.  The contribution of fiber reinforcement system to the overall toughness of cellulose fiber concrete panels , 2017 .

[40]  Kang Hai Tan,et al.  Effects of Si/Al molar ratio on strength endurance and volume stability of metakaolin geopolymers subject to elevated temperature , 2017 .

[41]  N. Ibrahim,et al.  Extraction and Characterization of Cellulose Nanocrystals from Tea Leaf Waste Fibers , 2017, Polymers.

[42]  M. Kaya,et al.  Flexural stress enhancement of concrete by incorporation of algal cellulose nanofibers , 2017 .

[43]  C. Leonelli,et al.  Thermal Behavior of Metakaolin-Based Geopolymer Cements Using Sodium Waterglass from Rice Husk Ash and Waste Glass as Alternative Activators , 2017 .

[44]  Chunjie Yan,et al.  Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack , 2017 .

[45]  Tanakorn Phoo-ngernkham,et al.  Comparative study using Portland cement and calcium carbide residue as a promoter in bottom ash geopolymer mortar , 2017 .

[46]  O. Sulaiman,et al.  Properties of cellulose nanocrystals from oil palm trunk isolated by total chlorine free method. , 2017, Carbohydrate polymers.

[47]  Yongjian Xu,et al.  Changes of hydrogen bonding and aggregation structure of cellulose fiber due to microwave-assisted alkali treatment and its impacts on the application as fluff pulp , 2017, Cellulose.

[48]  K. Sheng,et al.  Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization , 2016 .

[49]  Xiang Gao,et al.  Multiple effects of nano-SiO2 and hybrid fibers on properties of high toughness fiber reinforced cementitious composites with high-volume fly ash , 2016 .

[50]  Wei Zhou,et al.  Influence of partial replacement of fly ash by metakaolin on mechanical properties and microstructure of fly ash geopolymer paste exposed to sulfate attack , 2016 .

[51]  C. Andrade,et al.  Recent durability studies on concrete structure , 2015 .

[52]  E. Grabowska,et al.  Sulphate Attack Resistance of Cement with Zeolite Additive , 2015 .

[53]  Nele De Belie,et al.  Resistance of concrete and mortar against combined attack of chloride and sodium sulphate , 2014 .

[54]  Biao Huang,et al.  Preparation of cellulose nanocrystals and carboxylated cellulose nanocrystals from borer powder of bamboo , 2014, Cellulose.

[55]  Yan He,et al.  Synthesis of a self-supporting faujasite zeolite membrane using geopolymer gel for separation of alcohol/water mixture , 2014 .

[56]  W. Müllauer,et al.  Sulfate attack expansion mechanisms , 2013 .

[57]  Jian He,et al.  Synthesis and characterization of red mud and rice husk ash-based geopolymer composites , 2013 .

[58]  Surendra P. Shah,et al.  Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials , 2012 .

[59]  B. Lothenbach,et al.  Hydration of Portland cement with high replacement by siliceous fly ash , 2012 .

[60]  P. Chindaprasirt,et al.  Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack , 2012 .

[61]  Yu-zhen Yu,et al.  The strength and microstructure of two geopolymers derived from metakaolin and red mud-fly ash admixture: A comparative study , 2012 .

[62]  A. Dufresne,et al.  Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers , 2012, Cellulose.

[63]  F. Pacheco-Torgal,et al.  Cementitious building materials reinforced with vegetable fibres : a review , 2011 .

[64]  Alexander Bismarck,et al.  Structure, morphology and thermal characteristics of banana nano fibers obtained by steam explosion. , 2011, Bioresource technology.

[65]  L. d'Hendecourt,et al.  Diffuse reflectance infrared Fourier transform spectroscopy as a tool to characterise water in adsorption/confinement situations. , 2006, Journal of colloid and interface science.

[66]  T. Bakharev,et al.  Durability of Geopolymer Materials in Sodium and Magnesium Sulfate Solutions , 2005 .

[67]  T. Bakharev,et al.  Geopolymeric materials prepared using Class F fly ash and elevated temperature curing , 2005 .

[68]  T. Bakharev,et al.  Resistance of geopolymer materials to acid attack , 2005 .

[69]  Bishwajit Bhattacharjee,et al.  Porosity, pore size distribution and in situ strength of concrete , 2003 .

[70]  A. Rana,et al.  Effect of alkali treated jute fibres on composite properties , 2001 .

[71]  K. Scrivener,et al.  Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites , 2000 .

[72]  I. Odler,et al.  Investigations on the relationship between porosity, structure and strength of hydrated Portland cement pastes. II. Effect of pore structure and of degree of hydration , 1985 .