Modeling of pneumatic valve dispenser for printing viscous biomaterials in additive manufacturing

Purpose – The purpose of this paper is establishing a general mathematical model and theoretical design rules for 3D printing of biomaterials. Additive manufacturing of biomaterials provides many opportunities for fabrication of complex tissue structures, which are difficult to fabricate by traditional manufacturing methods. Related problems and research tasks are raised by the study on biomaterials’ 3D printing. Most researchers are interested in the materials studies; however, the corresponded additive manufacturing machine is facing some technical problems in printing user-prepared biomaterials. New biomaterials have uncertainty in physical properties, such as viscosity and surface tension coefficient. Therefore, the 3D printing process requires lots of trials to achieve proper printing parameters, such as printing layer thickness, maximum printing line distance and printing nozzle’s feeding speed; otherwise, the desired computer-aided design (CAD) file will not be printed successfully in 3D printing. ...

[1]  Han Tong Loh,et al.  Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system , 2002 .

[2]  B N Chichkov,et al.  Femtosecond laser-induced two-photon polymerization of inorganic-organic hybrid materials for applications in photonics. , 2003, Optics letters.

[3]  S. Van Vlierberghe,et al.  Biopolymer-based hydrogels as scaffolds for tissue engineering applications: a review. , 2011, Biomacromolecules.

[4]  Seth R. Marder,et al.  Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication , 1999, Nature.

[5]  W. Sun,et al.  Bioprinting cell-laden matrigel for radioprotection study of liver by pro-drug conversion in a dual-tissue microfluidic chip , 2011, Biofabrication.

[6]  V. Mironov,et al.  Designer ‘blueprint’ for vascular trees: morphology evolution of vascular tissue constructs , 2009 .

[7]  Wei Sun,et al.  Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing. , 2008, Tissue engineering. Part A.

[8]  Hyeongjin Lee,et al.  Cryogenically fabricated three-dimensional chitosan scaffolds with pore size-controlled structures for biomedical applications , 2011 .

[9]  Y. Wong,et al.  Direct writing of chitosan scaffolds using a robotic system , 2005 .

[10]  S. R. S. Kalpakjian.  Manufacturing Processes for Engineering Materials , 1984 .

[11]  Wei Sun,et al.  Bioprinting endothelial cells with alginate for 3D tissue constructs. , 2009, Journal of biomechanical engineering.

[12]  Jack G. Zhou,et al.  A novel sucrose porogen‐based solid freeform fabrication system for bone scaffold manufacturing , 2010 .

[13]  Andrés Díaz Lantada,et al.  Rapid prototyping for biomedical engineering: current capabilities and challenges. , 2012, Annual review of biomedical engineering.

[14]  H. Schonhorn.  Surface Tension-Viscosity Relationship for Liquids. , 1967 .

[15]  Wei Sun,et al.  Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds , 2005 .

[16]  I. G. Currie.  Fundamental mechanics of fluids , 1974 .

[17]  A. H. Pelofsky.  Surface Tension-Viscosity Relation for Liquids. , 1966 .

[18]  Vladimir Mironov,et al.  Towards organ printing: engineering an intra-organ branched vascular tree , 2010, Expert opinion on biological therapy.

[19]  Geunhyung Kim,et al.  3D polycarprolactone (PCL) scaffold with hierarchical structure fabricated by a piezoelectric transducer (PZT)-assisted bioplotter , 2009 .

[20]  Wei Sun,et al.  Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro. , 2007, Biomaterials.