论文信息 - Dipole-mode-free and kick-free 2-cell cavity for the SC ERL injector

Dipole-mode-free and kick-free 2-cell cavity for the SC ERL injector

For the ERL injector, superconducting cavities are needed to deliver to the beam a 100 kWCW RF power. With a beam current of 100...33 mA, gap voltage of 1...3 MV, the coupler must have an external g-factor in the range of 4.6/spl times/10/sup 4/...4.1/spl times/10/sup 5/. The cavity shape and coupler design presented provide the possibility of working in the range of parameters without substantial transverse kick to the beam and HOM-losses in the system. In order to preserve field flatness while the dipole mode is driven out, the 2-cell cavity has a protruding iris between the cell and the larger beam pipe. A twin-coaxial coupler has high coupling but low kick because of its symmetry. Calculation and optimization of the coupler-cavity system are performed with a 2D SLANS and 3D Microwave Studio/sup /spl reg// codes.

S. Belomestnykh | M. Liepe | H. Padamsee | R.L. Geng | V. Shemelin

[1] R. Ringrose,et al. Accelerating cavity development for the Cornell B-factory, CESR-B , 1991, Conference Record of the 1991 IEEE Particle Accelerator Conference.

[2] E. al.,et al. Superconducting TESLA cavities , 2000, physics/0003011.

[3] Maury Tigner,et al. Phase I Energy Recovery Linac at Cornell University , 2002 .

[4] S. Belomestnykh,et al. LOW-KICK TWIN-COAXIAL AND WAVEGUIDE-COAXIAL COUPLERS FOR ERL , 2002 .

[5] H. Padamsee,et al. High average power fundamental input couplers for the Cornell University ERL: requirements, design challenges and first ideas , 2002 .

[6] D. G. Myakishev,et al. The new possibilities of SuperLANS code for evaluation of axisymmetric cavities , 1995, Proceedings Particle Accelerator Conference.