The effect of the secondary lateral stopper on the compressed stability of the couplers and running safety of the locomotives

This paper aims to study the effect of the secondary lateral stopper on the compressed stability of the couplers in order to improve the running safety of the heavy-haul locomotives. The influence mechanism of the secondary lateral stopper on the compressed stability of the couplers is theoretically analyzed. To verify the effect of the secondary lateral stopper, both the simulation and the field braking tests are conducted. The multi-body dynamic model consists of two eight-axle locomotives, one dummy of freight vehicle and four detailed connected couplers. The field braking tests are conducted on the tangent line using three eight-axle locomotives. The results indicate that decreasing the free clearance and increasing the stiffness of the secondary lateral stopper both have a positive effect. However, when the free clearance decreases from 20 mm to 10 mm, there is no remarkable decrease in the yaw angles of the coupler and the car body, and the maximum lateral force of the wheelset is still out of the standard in the simulation. When the stiffness of the secondary lateral stopper increases by five times, the yaw angles of the coupler and the car body are reduced significantly and the running safety of the locomotives is also enhanced.

[1]  Majid Pouranvari,et al.  Failure Analysis of Automatic Coupler SA-3 in Railway Carriages , 2007 .

[2]  Yuan Yao,et al.  The stability mechanism and its application to heavy-haul couplers with arc surface contact , 2013 .

[3]  Maksym Spiryagin,et al.  Advanced dynamic modelling for friction draft gears , 2015 .

[4]  Q. Wu,et al.  The Run-Time Behaviour of Coupler Systems on Heavy Haul Locomotives Q.Wu, S.H.Luo, Z.Q.xu , 2015 .

[5]  Mohammad Durali,et al.  Nonlinear Analysis of Train Derailment in Severe Braking , 2003 .

[6]  Yuan Yao,et al.  The stability and mechanical characteristics of heavy haul couplers with restoring bumpstop , 2014 .

[7]  Colin Cole,et al.  Simulation of traction and curving for passive steering hauling locomotives , 2008 .

[8]  Luca Pugi,et al.  Preliminary studies concerning the application of different braking arrangements on Italian freight trains , 2011 .

[9]  Saeed Mohammadi,et al.  The Effects of Train Brake Delay Time on In-Train Forces , 2010 .

[10]  Song Rong-rong.  Study on the Coupler Stability of Locomotive SS_(3B) Running on the Long Heavy Down Grade , 2010 .

[11]  Wanming Zhai,et al.  Establishment and verification of three-dimensional dynamic model for heavy-haul train–track coupled system , 2016 .

[12]  Shihui Luo,et al.  Coupler dynamic performance analysis of heavy haul locomotives , 2012 .

[13]  Colin Cole,et al.  Simulated comparisons of wagon coupler systems in heavy haul trains , 2006 .

[14]  Colin Cole,et al.  Idealized steering for hauling locomotives , 2007 .

[15]  Thomas Geike.  Understanding high coupler forces at metro vehicles , 2007 .

[16]  Maksym Spiryagin,et al.  Wagon instability in long trains , 2012 .

[17]  Colin Cole,et al.  Improvements to Wagon Connection Modelling for Longitudinal Train Simulation , 1998 .

[18]  Paul Curcio,et al.  Ore-car coupler performance at BHP-Billiton Iron Ore , 2004 .

[19]  Federico Cheli,et al.  Numerical and experimental approach for the evaluation of severe longitudinal dynamics of heavy freight trains , 2007 .

[20]  Yuan Yao,et al.  Dynamic performances of an innovative coupler used in heavy haul trains , 2014 .

[21]  Maksym Spiryagin,et al.  A review of dynamics modelling of friction draft gear , 2014 .