An energy and exergy analysis of the supercritical water reforming of glycerol for power production

Abstract As a continuation of a previous work, a conceptual design is proposed for reforming glycerol using supercritical water to produce maximum electrical power in an energy self-sufficient system. The scheme of the process is simulated after discussing some routes to achieve the aim. The selected way takes advantage of the huge pressure energy of reformate products just at the outlet of the reforming process. The expanded product gas is used as a fuel gas to provide the thermal energy required by the reforming process. The evaluation of the thermodynamic performance of the process is carried out by an energy and exergy analysis. As relevant outputs measurements of the process performance, the net work and exergetic efficiencies as well as the mole fraction and molar flow-rates of hydrogen obtained. Glycerol feed concentration in aqueous solution at which no external heat source is needed was obtained, both for pure and pretreated crude glycerol, at 800 °C and 240 atm. The effect of the main operating parameters has been investigated by sensitivity analysis to identify optimal conditions that maximize power production. In the exergy analysis, the thermodynamic efficiencies used for the overall process and for its individual units are suitably discussed. The computation has been made with the aid of AspenPlus™, using the predictive Soave-Redlich-Kwong equation of state as thermodynamic method in the simulation of the supercritical region. The next study in this series of glycerol reforming using SCW will aim to maximize hydrogen production, including the syngas purification, to generate electricity via fuel cells.

[1]  Kevin Kendall,et al.  Steam reforming of biodiesel by-product to make renewable hydrogen. , 2008, Bioresource technology.

[2]  Phillip E. Savage,et al.  Organic Chemical Reactions in Supercritical Water. , 1999, Chemical reviews.

[3]  Amornchai Arpornwichanop,et al.  Thermodynamic study of hydrogen production from crude glycerol autothermal reforming for fuel cell applications , 2010 .

[4]  Miroslaw L. Wyszynski,et al.  On-board generation of hydrogen-rich gaseous fuels—a review , 1994 .

[5]  F. Barbir,et al.  Hydrogen: the wonder fuel , 1992 .

[6]  Maria L. Japas,et al.  High Pressure Phase Equilibria and PVT‐Data. of the Water‐Nitrogen System to 673 K and 250 MPa , 1985 .

[7]  G. Boissonnet,et al.  Evaluation of biomass gasification in supercritical water process for hydrogen production , 2005 .

[8]  Ibrahim Dincer,et al.  Understanding energy and exergy efficiencies for improved energy management in power plants , 2007 .

[9]  Stefan Czernik,et al.  Hydrogen by Catalytic Steam Reforming of Liquid Byproducts from Biomass Thermoconversion Processes , 2002 .

[10]  Brant A. Peppley,et al.  Hydrogen production by steam reforming of methanol for polymer electrolyte fuel cells , 1994 .

[11]  S. Gwaltney,et al.  A thermodynamic analysis of hydrogen production by steam reforming of glycerol , 2007 .

[12]  Mehmet Kanogˇlu,et al.  Performance characteristics of a Diesel engine power plant , 2005 .

[13]  T. J. Kotas,et al.  The Exergy Method of Thermal Plant Analysis , 2012 .

[14]  Frédéric Vogel,et al.  In situ visualization of the performance of a supercritical-water salt separator using neutron radiography , 2008 .

[15]  Pedro Ollero,et al.  Thermodynamic study of the supercritical water reforming of glycerol , 2011 .

[16]  James A. Dumesic,et al.  A review of catalytic issues and process conditions for renewable hydrogen and alkanes by aqueous-phase reforming of oxygenated hydrocarbons over supported metal catalysts , 2005 .

[17]  Zhijian Tian,et al.  Production of hydrogen by aqueous-phase reforming of glycerol , 2008 .

[18]  R. Kumar,et al.  FUEL PROCESSING REQUIREMENTS AND TECHNIQUES FOR FUEL CELL PROPULSION POWER. , 1993 .

[19]  Hao Wang,et al.  Thermodynamic analysis of hydrogen production from glycerol autothermal reforming , 2009 .

[20]  Sadashiv M. Swami,et al.  Integrated catalytic process for conversion of biomass to hydrogen , 2006 .

[21]  K. Sjöström,et al.  Onboard hydrogen generation by methanol decomposition for the cold start of neat methanol engines , 1991 .

[22]  J. Dumesic,et al.  Hydrogen from catalytic reforming of biomass-derived hydrocarbons in liquid water , 2002, Nature.

[23]  E. U. Franck,et al.  The system hydrogen ‐ water up to 440°C and 2500 bar pressure , 1981 .