The transmission characteristics of sound wave in power cable

The cause of power electric cable fault is often source from the cable splice and cable terminator used in the electric cable connection and the partial discharge released from the improper construction process. It makes the insulation stuff aging and damaged. When the insulation capability becomes worse, it could cause unexpected damage on the high-voltage cables, many industry and research institutes have paid more and more attention on the maintenance of high voltage cables and diagnosis techniques of fault prediction. The acoustic emission method mentioned in this article is mainly on the characteristics analysis of basic measurement of sound delivery characteristics during the electric cable connection, the research on the original location of sound wave, and distribution attenuation.

[1]  A. E. Davies,et al.  Partial discharge detection in cables using VHF capacitive couplers , 2003 .

[2]  P. Lewin,et al.  Comparison of on-line partial discharge detection methods for HV cable joints , 2002 .

[3]  P.L. Lewin,et al.  Continuous on-line monitoring of partial discharges in high voltage cables , 2004, Conference Record of the 2004 IEEE International Symposium on Electrical Insulation.

[4]  U. Schichler.  A sensitive method for on-site partial discharge detection on XLPE cable joints , 1997, Proceedings of 5th International Conference on Properties and Applications of Dielectric Materials.

[5]  Xie Hengkun,et al.  Study on wideband sensor of partial discharge for XLPE power cable , 2003, Proceedings of the 7th International Conference on Properties and Applications of Dielectric Materials (Cat. No.03CH37417).

[6]  Mats Leijon,et al.  Detection and localization of partial discharge in high voltage power cable joints , 1998, ICSD'98. Proceedings of the 1998 IEEE 6th International Conference on Conduction and Breakdown in Solid Dielectrics (Cat. No.98CH36132).