Metallic muscles at work: high rate actuation in nanoporous gold/polyaniline composites.

Metallic muscles made of nanoporous metals suffer from serious drawbacks caused by the usage of an aqueous electrolyte for actuation. An aqueous electrolyte prohibits metallic muscles from operating in dry environments and hampers a high actuation rate due to the low ionic conductivity of electrolytes. In addition, redox reactions involved in electrochemical actuation severely coarsen the ligaments of nanoporous metals, leading to a substantial loss in performance of the actuator. Here we present an electrolyte-free approach to put metallic muscles to work via a metal/polymer interface. A nanocoating of polyaniline doped with sulfuric acid was grown onto the ligaments of nanoporous gold. Dopant sulfate anions coadsorbed into the polymer coating matrix were exploited to tune the nanoporous metal surface stress and subsequently generate macroscopic dimensional changes in the metal. Strain rates achieved in the single-component nanoporous metal/polymer composite actuator are 3 orders of magnitude higher than that of the standard three-component nanoporous metal/electrolyte hybrid actuator.

[1]  J. J. M. Vleggaar,et al.  Electron and hole transport in poly(p‐phenylene vinylene) devices , 1996 .

[2]  J. Lee,et al.  PROGRESS IN PREPARATION, PROCESSING AND APPLICATIONS OF POLYANILINE , 2009 .

[3]  Ju Li,et al.  Controlling bending and twisting of conjugated polymers via solitons. , 2005, Physical review letters.

[4]  P. Onck,et al.  Reversible strain by physisorption in nanoporous gold , 2011 .

[5]  Ian D. Parker,et al.  Carrier tunneling and device characteristics in polymer light-emitting diodes , 1994, Photonics West - Lasers and Applications in Science and Engineering.

[6]  V. I. Krinichnyi,et al.  EPR and charge transfer in H 2 SO 4 -doped polyaniline , 2002 .

[7]  P. Blom,et al.  Hysteresis-free electron currents in poly(p-phenylene vinylene) derivatives , 2010 .

[8]  P. Onck,et al.  Enhanced strain in functional nanoporous gold with a dual microscopic length scale structure. , 2012, ACS nano.

[9]  J. Heinze,et al.  Electrochemistry of conducting polymers--persistent models and new concepts. , 2010, Chemical reviews.

[10]  H. Yan,et al.  All‐Solid Actuator Consisting of Polyaniline Film and Solid Polymer Electrolyte , 2003 .

[11]  M. Seo,et al.  Nanoporous Au-Pt alloys as large strain electrochemical actuators. , 2010, Nano letters.

[12]  Man Hoi Wong,et al.  How to make ohmic contacts to organic semiconductors. , 2004, Chemphyschem : a European journal of chemical physics and physical chemistry.

[13]  Paul W. M. Blom,et al.  Charge transport in poly(p-phenylene vinylene) light-emitting diodes , 2000 .

[14]  E. Smela,et al.  Polaron-induced conformation change in single polypyrrole chain: An intrinsic actuation mechanism , 2005 .

[15]  A. Rinzler,et al.  Carbon nanotube actuators , 1999, Science.

[16]  D. Mencaraglia,et al.  Temperature dependent impedance spectroscopy on polyaniline based devices , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[17]  T. Fujita,et al.  Three-dimensional bicontinuous nanoporous Au/polyaniline hybrid films for high-performance electrochemical supercapacitors , 2012 .

[18]  M. Mogensen,et al.  ELECTRICAL CONDUCTIVITY MEASUREMENTS OF AQUEOUS AND IMMOBILIZED POTASSIUM HYDROXIDE , 2012 .

[19]  P. Onck,et al.  Direct synthesis of metal nanoparticles with tunable porosity , 2012 .

[20]  Tae-Woo Lee,et al.  Polyaniline-based conducting polymer compositions with a high work function for hole-injection layers in organic light-emitting diodes: formation of ohmic contacts. , 2011, ChemSusChem.

[21]  P. Bronsveld,et al.  Fine-tuning the feature size of nanoporous silver , 2012 .

[22]  E. D. Jong,et al.  On the specific surface area of nanoporous materials , 2011 .

[23]  Yih Horng Tan,et al.  Surface area and pore size characteristics of nanoporous gold subjected to thermal, mechanical, or surface modification studied using gas adsorption isotherms, cyclic voltammetry, thermogravimetric analysis, and scanning electron microscopy. , 2012, Journal of materials chemistry.

[24]  J. Erlebacher,et al.  Size dependence of effective Young’s modulus of nanoporous gold , 2007 .

[25]  Harald Ibach,et al.  The role of surface stress in reconstruction, epitaxial growth and stabilization of mesoscopic structures , 1997 .

[26]  Liang-Yueh Ou Yang,et al.  Conformations of polyaniline molecules adsorbed on Au(111) probed by in situ STM and ex situ XPS and NEXAFS. , 2009, Journal of the American Chemical Society.

[27]  L. Zepeda-Ruiz,et al.  Surface-chemistry-driven actuation in nanoporous gold. , 2009, Nature materials.

[28]  J. Weissmüller,et al.  Bulk Nanoporous Metal for Actuation , 2010 .

[29]  Ray H. Baughman,et al.  Muscles Made from Metal , 2003, Science.

[30]  D. Kramer,et al.  Surface-Stress Induced Macroscopic Bending of Nanoporous Gold Cantilevers , 2004 .

[31]  H. Gleiter,et al.  Charge-Induced Reversible Strain in a Metal. , 2003 .

[32]  Houyi Ma,et al.  Nanostructured Porous Gold for Methanol Electro-Oxidation , 2007 .

[33]  J. Weissmüller,et al.  Adsorbate effects on the surface stress–charge response of platinum electrodes , 2008 .

[34]  S. J. van der Molen,et al.  Universal scaling in highly doped conducting polymer films. , 2010, Physical review letters.

[35]  Zachary J. Traina,et al.  A strain amplifying piezoelectric MEMS actuator , 2007 .

[36]  F. Meng,et al.  Sub‐Micrometer‐Thick All‐Solid‐State Supercapacitors with High Power and Energy Densities , 2011, Advanced materials.

[37]  I. Hunter,et al.  Fast contracting polypyrrole actuators , 2000 .