Comparison of the load at failure of soldered and nonsoldered porcelain-fused-to-metal crowns.

[1]  D. Zero,et al.  Influence of metal surface finishing on porcelain porosity and beam failure loads at the metal-ceramic interface. , 2000, The Journal of prosthetic dentistry.

[2]  J R Kelly,et al.  Clinically relevant approach to failure testing of all-ceramic restorations. , 1999, The Journal of prosthetic dentistry.

[3]  W. Brantley,et al.  Porcelain adherence vs force to failure for palladium-gallium alloys: a critique of metal-ceramic bond testing. , 1998, Dental materials : official publication of the Academy of Dental Materials.

[4]  K. Zeng,et al.  Flexure tests on dental ceramics. , 1996, The International journal of prosthodontics.

[5]  A. Carr,et al.  New high-palladium casting alloys: studies of the interface with porcelain. , 1996, The International journal of prosthodontics.

[6]  A. Carr,et al.  Porcelain adherence to high-palladium alloys. , 1993, The Journal of prosthetic dentistry.

[7]  Carr Ab,et al.  New high-palladium casting alloys: 1. Overview and initial studies. , 1991 .

[8]  K J Anusavice,et al.  Influence of Test Method on Failure Stress of Brittle Dental Materials , 1990, Journal of dental research.

[9]  C. Fairhurst,et al.  The Relationship Between Oxide Adherence and Porcelain-Metal Bonding , 1988, Journal of dental research.

[10]  F. M. Gardner,et al.  A survey of crown and fixed partial denture failures: length of service and reasons for replacement. , 1986, The Journal of prosthetic dentistry.

[11]  H. Herø,et al.  Carbon impurities and properties of some palladium alloys for ceramic veneering. , 1985, Dental materials : official publication of the Academy of Dental Materials.

[12]  A. Guckes,et al.  A comparison of the bond strength of two ceramometal systems. , 1982, The Journal of prosthetic dentistry.

[13]  K J Anusavice,et al.  An evaluation of the four-point flexural test for metal-ceramic bond strength. , 1982, Journal of dental research.

[14]  S. P. Schaffer.  An approach to determining the bond strength of ceramometal systems. , 1982, The Journal of prosthetic dentistry.

[15]  K J Anusavice,et al.  Comparative evaluation of ceramic-metal bond tests using finite element stress analysis. , 1980, Journal of dental research.

[16]  K. Anusavice,et al.  Adherence Controlling Elements in Ceramic-Metal Systems. II. Nonprecious Alloys , 1977, Journal of dental research.

[17]  C. Fairhurst,et al.  Bond strength and mechanical properties of dental porcelain enamels. , 1967, The Journal of prosthetic dentistry.

[18]  R. Tallents,et al.  Effect of soldering on metal-porcelain bond strength in repaired porcelain-fused-to-metal castings. , 2001, The Journal of prosthetic dentistry.

[19]  G. Marshall,et al.  Metal ceramic compatibility: a review of the literature. , 1990, The Journal of prosthetic dentistry.

[20]  Herbert T.Shillingburg...,et al.  Fundamentals of fixed prosthodontics , 1979 .