Investigation on surface roughness and hardness of β-Ti alloy by ball burnishing assisted electrical discharge cladding for bio-medical applications

[1]  A. Das,et al.  Formation of superhydrophobic surface with enhanced hardness and wear resistance by electrical discharge coating process , 2021 .

[2]  M. Uzair,et al.  Development and heat treatment of β-phase titanium alloy for orthopedic application , 2021 .

[3]  Sunpreet Singh,et al.  Functional grading of surfaces through hybrid ultrasonic, abrasive water jet, and electric discharge machining processing , 2021, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[4]  Sunpreet Singh,et al.  Experimental investigation into nano-finishing of β-TNTZ alloy using magnetorheological fluid magnetic abrasive finishing process for orthopedic applications , 2021 .

[5]  C. Paul,et al.  Comparison of microstructure and mechanical performance of laser and electron beam welded Ti6Al4V alloy , 2021 .

[6]  K. Chatterjee,et al.  Review of recent developments in surface nanocrystallization of metallic biomaterials. , 2021, Nanoscale.

[7]  K. Vasilev,et al.  Synergistic effect of deep ball burnishing and HA coating on surface integrity, corrosion and immune response of biodegradable AZ31B Mg alloys. , 2021, Materials science & engineering. C, Materials for biological applications.

[8]  Sunpreet Singh,et al.  Magneto-Rheological Fluid Assisted Abrasive Nanofinishing of β-Phase Ti-Nb-Ta-Zr Alloy: Parametric Appraisal and Corrosion Analysis , 2020, Materials.

[9]  Sunpreet Singh,et al.  Effect of cryogenic treatment on the microstructure, mechanical properties and finishability of β-TNTZ alloy for orthopedic applications , 2020 .

[10]  H. Singh,et al.  Deposition of HA-TiO2 by plasma spray on β-phase Ti-35Nb-7Ta-5Zr alloy for hip stem: Characterization, mechanical properties, corrosion, and in-vitro bioactivity , 2020 .

[11]  H. Singh,et al.  Plasma Spray Deposition of HA-TiO2 on β-phase Ti-35Nb-7Ta-5Zr Alloy for Hip Stem: Characterization of Bio-mechanical Properties, Wettability, and Wear Resistance , 2020, Journal of Bionic Engineering.

[12]  Liqiang Wang,et al.  Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests , 2020, Advanced Engineering Materials.

[13]  Sunpreet Singh,et al.  Surface Modification of Ti-6Al-4V Alloy by Electrical Discharge Coating Process Using Partially Sintered Ti-Nb Electrode , 2019, Materials.

[14]  D. StJohn,et al.  Investigating the morphological effects of solute on the β-phase in as-cast titanium alloys , 2019, Journal of Alloys and Compounds.

[15]  H. Singh,et al.  Current Trends in Biomaterials and Bio-manufacturing , 2019, Biomanufacturing.

[16]  Sunpreet Singh,et al.  Multi-objective particle swarm optimization of EDM parameters to deposit HA-coating on biodegradable Mg-alloy , 2018, Vacuum.

[17]  Seung‐Woo Cho,et al.  Significant improvement in cell adhesion and wear resistance of biomedical β-type titanium alloy through ultrasonic nanocrystal surface modification , 2018, Journal of Alloys and Compounds.

[18]  Sunpreet Singh,et al.  Synthesis and characterization of Mg-Zn-Mn-HA composite by spark plasma sintering process for orthopedic applications , 2018, Vacuum.

[19]  B. S. Pabla,et al.  Synthesis, characterization, corrosion and bioactivity investigation of nano-HA coating deposited on biodegradable Mg-Zn-Mn alloy , 2018, Surface and Coatings Technology.

[20]  A. Das,et al.  Electrical discharge coating using WS2 and Cu powder mixture for solid lubrication and enhanced tribological performance , 2018 .

[21]  J. Wilson.  Metallic biomaterials: State of the art and new challenges , 2018 .

[22]  A. Amanov,et al.  Nanostructured β-type titanium alloy fabricated by ultrasonic nanocrystal surface modification. , 2017, Ultrasonics sonochemistry.

[23]  T. Ginta,et al.  A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants , 2017 .

[24]  Kateryna Bazaka,et al.  Metallic Biomaterials: Current Challenges and Opportunities , 2017, Materials.

[25]  S. Ou,et al.  Effects of bioceramic particles in dielectric of powder-mixed electrical discharge machining on machining and surface characteristics of titanium alloys , 2017 .

[26]  B. S. Pabla,et al.  Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy , 2017 .

[27]  B. S. Pabla,et al.  Potential of Silicon Powder-Mixed Electro Spark Alloying for Surface Modification of β-Phase Titanium Alloy for Orthopedic Applications , 2017 .

[28]  W. Sales,et al.  Titanium perovskite (CaTiO3) formation in Ti6Al4V alloy using the electrical discharge machining process for biomedical applications , 2016 .

[29]  Sanjeev Puri,et al.  Powder Mixed Electric Discharge Machining: An Innovative Surface Modification Technique to Enhance Fatigue Performance and Bioactivity of β-Ti Implant for Orthopedics Application , 2016, J. Comput. Inf. Sci. Eng..

[30]  B. S. Pabla,et al.  Effect of Surface Nano-Porosities Fabricated by Powder Mixed Electric Discharge Machining on Bone-Implant Interface: An Experimental and Finite Element Study , 2016 .

[31]  S. Ou,et al.  Fabrication of a hydroxyapatite-containing coating on Ti–Ta alloy by electrical discharge coating and hydrothermal treatment , 2016 .

[32]  Chander Prakash,et al.  Multi-objective optimization of powder mixed electric discharge machining parameters for fabrication of biocompatible layer on β-Ti alloy using NSGA-II coupled with Taguchi based response surface methodology , 2016 .

[33]  X. Jie,et al.  Titanium carbide coating with enhanced tribological properties obtained by EDC using partially sintered titanium electrodes and graphite powder mixed dielectric , 2016 .

[34]  Bülent Ekmekci,et al.  Electrical Discharge Machining of Ti6Al4V in Hydroxyapatite Powder Mixed Dielectric Liquid , 2016 .

[35]  B. S. Pabla,et al.  Electric discharge machining – A potential choice for surface modification of metallic implants for orthopedic applications: A review , 2016 .

[36]  B. S. Pabla,et al.  Processing and Characterization of Novel Biomimetic Nanoporous Bioceramic Surface on β-Ti Implant by Powder Mixed Electric Discharge Machining , 2015, Journal of Materials Engineering and Performance.

[37]  Ming-Hong Lin,et al.  Research of the recast layer on implant surface modified by micro-current electrical discharge machining using deionized water mixed with titanium powder as dielectric solvent , 2014 .

[38]  M. Janeček,et al.  Innovative surface modification of Ti-6Al-4V alloy with a positive effect on osteoblast proliferation and fatigue performance. , 2014, Materials science & engineering. C, Materials for biological applications.

[39]  Bülent Ekmekci,et al.  Hydroxyapatite Deposition onto Ti-6Al-4V Surface in Powder Mixed Electrical Discharge Machining , 2013 .

[40]  M. Janeček,et al.  Characterization of electric discharge machining, subsequent etching and shot-peening as a surface treatment for orthopedic implants , 2013 .

[41]  M. Bačáková,et al.  Surface treatment by electric discharge machining of Ti-6Al-4V alloy for potential application in orthopaedics. , 2012, Journal of the mechanical behavior of biomedical materials.

[42]  Petr Harcuba,et al.  The effect of microstructure on fatigue performance of Ti-6Al-4V alloy after EDM surface treatment for application in orthopaedics. , 2011, Journal of the mechanical behavior of biomedical materials.

[43]  B. Yan,et al.  Surface modification of Al–Zn–Mg alloy by combined electrical discharge machining with ball burnish machining , 2002 .

[44]  Yan Cherng Lin,et al.  Surface Improvement Using a Combination of Electrical Discharge Machining with Ball Burnish Machining Based on the Taguchi Method , 2001 .

[45]  Yan Cherng Lin,et al.  Feasibility study of rotary electrical discharge machining with ball burnishing for Al2O3/6061Al composite , 2000 .