Numerically investigated effects of different Dean number and pitch size on flow and heat transfer characteristics in a helically coil-tube heat exchanger

Abstract A helically coil-tube heat exchanger is generally applied in industry applications due to its compact structure, larger heat transfer area and higher heat transfer capability, etc. However, flow and heat transfer phenomena related to this kind of heat exchanger are so sophisticated. A computational fluid dynamics (CFD) methodology is proposed in this paper to investigate effects of different Dean (De) number and pitch size on the thermal–hydraulic characteristics in a helically coil-tube heat exchanger. Three values of De number and four sizes of pitch are considered herein. Based on the simulation results, the complicated phenomena occurred within a helically coiled-tube heat exchanger can be reasonably captured, including the flow acceleration and separation in the shell side, the turbulent wake around the rear of a coiled tube, the secondary flow within the tube, and the developing flow and heat transfer behaviors from the entrance region, etc. Existing experimental data of friction factor and Nusselt (Nu) number versus Re number (or De number) have been used to validate the present CFD model. According to the comparison results, the present predicted trends correspond with the experimental measurements both qualitatively and quantitatively.

[1]  Somchai Wongwises,et al.  A review of flow and heat transfer characteristics in curved tubes , 2006 .

[2]  Krishna D.P. Nigam,et al.  Pressure drop and heat transfer study in tube-in-tube helical heat exchanger , 2006 .

[3]  D. B. Spalding,et al.  Prediction of laminar flow and heat transfer in helically coiled pipes , 1974, Journal of Fluid Mechanics.

[4]  M. A. Ebadian,et al.  Turbulent forced convection in a helicoidal pipe with substantial pitch , 1996 .

[5]  Timothy J. Rennie,et al.  Numerical studies of a double-pipe helical heat exchanger , 2006 .

[6]  Pallippattu Krishnan Vijayan,et al.  Experimental and CFD estimation of heat transfer in helically coiled heat exchangers , 2008 .

[7]  Edward W. Merrill,et al.  Effect of secondary fluid motion on laminar flow heat transfer in helically coiled tubes , 1971 .

[8]  Krishna D.P. Nigam,et al.  Experimental Study on Pressure Drop and Heat Transfer of Turbulent Flow in Tube in Tube Helical Heat Exchanger , 2009 .

[9]  Yu Yu,et al.  Hydraulic Performance of Small Bending Radius Helical Coil-Pipe , 2001 .

[10]  G. S. Vijaya Raghavan,et al.  Natural convection heat transfer from helical coiled tubes , 2004 .

[11]  Douglas M. Ruthven,et al.  The residence time distribution for ideal laminar flow in helical tube , 1971 .

[12]  M. A. Ebadian,et al.  Laminar forced convection in a helicoidal pipe with finite pitch , 1995 .

[13]  Hessam Taherian,et al.  Experimental study of mixed convection heat transfer in vertical helically coiled tube heat exchangers , 2010 .

[14]  Cheng-Xian Lin,et al.  Turbulent mixed convective heat transfer in the entrance region of a curved pipe with uniform wall-temperature , 1998 .

[15]  Kannan N. Iyer,et al.  CFD analysis of single-phase flows inside helically coiled tubes , 2010, Comput. Chem. Eng..

[16]  M. A. Ebadian,et al.  Mixed convective flow and heat transfer in a vertical helicoidal pipe with finite pitch , 1994 .

[17]  C. J. Hoogendoorn,et al.  Laminar convective heat transfer in helical coiled tubes , 1978 .

[18]  Krishna D.P. Nigam,et al.  Numerical studies of a tube-in-tube helically coiled heat exchanger , 2008 .

[19]  Kaifen Zuo,et al.  Overview of the 10 MW high temperature gas cooled reactor—test module project , 2002 .

[20]  R. Friedrich,et al.  Direct numerical simulation of turbulent flows in curved and helically coiled pipes , 2001 .

[21]  Cheng-Xian Lin,et al.  Developing Turbulent Convective Heat Transfer in Helical Pipes , 1996, Heat Transfer: Volume 2 — Heat Transfer in Turbulent Flows; Fundamentals of Convection Heat Transfer; Fundamentals of Natural Convection in Laminar and Turbulent Flows; Natural Circulation.

[22]  Hirokazu Tsuji,et al.  Developments of metallic materials and a high-temperature structural design code for the HTTR , 1991 .

[23]  J. P. V. Doormaal,et al.  ENHANCEMENTS OF THE SIMPLE METHOD FOR PREDICTING INCOMPRESSIBLE FLUID FLOWS , 1984 .

[24]  Rainer Friedrich,et al.  Influence of curvature and torsion on turbulent flow in helically coiled pipes , 2000 .

[25]  J. Szépvölgyi,et al.  Fluid flow in tubes with helical elements , 2003 .