Preparation of single phase molybdenum boride

[1]  M. Shamanian,et al.  Synthesis of Mo5SiB2 based nanocomposites by mechanical alloying and subsequent heat treatment , 2011 .

[2]  H. J. Wang,et al.  Combustion synthesis of vanadium borides , 2011 .

[3]  Hideki Hyuga,et al.  Synthesis, microstructure and mechanical properties of reaction-infiltrated TiB2–SiC–Si composites , 2011 .

[4]  D. Bučevac,et al.  Pressureless sintering of internally synthesized SiC-TiB2 composites with improved fracture strength , 2011 .

[5]  B. Derin,et al.  Production of tungsten boride from CaWO4 by self-propagating high-temperature synthesis followed by HCl leaching , 2011 .

[6]  Jie Luo,et al.  In situ reaction synthesis of Ti–TiB composites containing high volume fraction of TiB by spark plasma sintering process , 2010 .

[7]  H. X. Yang,et al.  Mechanochemical synthesis and electrochemical characterization of VBx as high capacity anode materials for air batteries , 2010 .

[8]  N. Fenineche,et al.  Magnetic and structural characterization of the mechanically alloyed Fe75Si15B10 powders , 2010 .

[9]  S. Anthonysamy,et al.  Determination of the thermodynamic stability of TiB2 , 2010 .

[10]  H. J. Wang,et al.  Preparation of borides in Nb–B and Cr–B systems by combustion synthesis involving borothermic reduction of Nb2O5 and Cr2O3 , 2010 .

[11]  F. Maglia,et al.  Self-propagating high-temperature synthesis of ZrB2 or TiB2 reinforced Ni–Al composite powder , 2009 .

[12]  F. Maglia,et al.  Preparation of nano-size ZrB2 powder by self-propagating high-temperature synthesis , 2009 .

[13]  C. Yeh,et al.  Preparation of molybdenum borides by combustion synthesis involving solid-phase displacement reactions , 2008 .

[14]  Barış Akgün,et al.  Formation of TiB2 by volume combustion and mechanochemical process , 2008 .

[15]  A. Khanra.  Reaction chemistry during self-propagating high-temperature synthesis (SHS) of H3BO3-ZrO2-Mg system , 2007 .

[16]  F. Maglia,et al.  Synthesis of zirconium diboride–zirconium nitride composite powders by self-propagating high-temperature synthesis , 2007 .

[17]  C. Yeh,et al.  Preparation of MoB and MoB–MoSi2 composites by combustion synthesis in SHS mode , 2007 .

[18]  H. Mizuno,et al.  MoB/CoCr Cermet Coatings by HVOF Spraying against Erosion by Molten Al-Zn Alloy , 2007 .

[19]  K. Yoshimi,et al.  Synthesis of Mo–Si–B in situ composites by mechanical alloying , 2007 .

[20]  O. Yucel,et al.  Effect of HCl concentration on TiB2 separation from a self-propagating high-temperature synthesis (SHS) product , 2007 .

[21]  M. D. Croon,et al.  Synthesis of protective Mo–Si–B coatings in molten salts and their oxidation behavior in an air–water mixture , 2006 .

[22]  C. Suryanarayana,et al.  Mechanical alloying and milling , 2004 .

[23]  R. Ricceri,et al.  A fast and low-cost room temperature process for TiB2 formation by mechanosynthesis , 2004 .

[24]  A. Khanra,et al.  Effect of NaCl on the synthesis of TiB2 powder by a self-propagating high-temperature synthesis technique , 2004 .

[25]  Yi Chen,et al.  A novel route to nanosized molybdenum boride and carbide and/or metallic molybdenum by thermo-synthesis method from MoO3, KBH4, and CCl4 , 2003 .

[26]  Jong-Hyeon Lee,et al.  Self-propagating high-temperature synthesis of nano-sized titanium carbide powder , 2002 .

[27]  V. Malyshev,et al.  High-temperature electrochemical synthesis of carbides, silicides and borides of VI-group metals in ionic melts , 2002 .

[28]  T. Sasaki,et al.  Mechanochemical synthesis of MoB2 and Mo2B5 , 2001 .

[29]  M. Kaufman,et al.  Synthesis of MoSi2-boride composites through in situ displacement reactions , 1997 .

[30]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[31]  Howard F. McMurdie,et al.  Phase diagrams for ceramists , 1964 .

[32]  和久 茂,et al.  E.M.Levin, H.F.McMurdie: Phase Diagrams for Ceramists: The American Ceramic Society. 4055N. High St., Columbus 14, Ohio. Part I. 1956, 286頁, 20×27.5cm, $10, Part II, 1959, 153頁, 20×27.5cm, $8. , 1961 .