Thermal models of railroad wheels and bearings

Abstract The rolling surface for railroad wheels can be a heat source that may have an impact on the performance of the wheel bearing. In this study, experimental data from an electrically-heated railroad wheel set is analyzed by constructing thermal models of the wheel set. A steady finite-element model, a steady-analytical model, and a transient lumped-parameter model are discussed. Model parameters are determined from careful comparisons with the experimental data. The lumped-parameter model given here is intended as a simple predictive tool for determining when wheel heating caused by rail operations will have an impact on bearing temperature. The model parameters found in this study will also be useful as experimentally-validated boundary conditions in ongoing finite-element studies of heated wheels.

[1]  Michael R. Hoeprich,et al.  Rolling-element bearing internal temperatures , 1996 .

[2]  Timothy Nigel Phillips,et al.  A transient thermal analysis for dynamically loaded bearings , 2000 .

[3]  Hao Wang,et al.  Axle burn-off and stack-up force analyses of a railroad roller bearing using the finite element method , 1996 .

[4]  Tore V Vernersson.  Temperatures at railway tread braking. Part 2: calibration and numerical examples , 2007 .

[5]  Constantine Tarawneh,et al.  Thermal Analysis of Railroad Bearings: Effect of Wheel Heating , 2009 .

[6]  Constantine Tarawneh,et al.  A Metallurgical and Experimental Investigation Into Sources of Warm Bearing Trending , 2008 .

[7]  Klaus Knothe,et al.  Determination of temperatures for sliding contact with applications for wheel-rail systems , 1995 .

[8]  K. Cole,et al.  Analysis of flux-base fins for estimation of heat transfer coefficient , 2009 .

[9]  Shao Wang,et al.  A Dynamic Model of the Torque and Heat Generation Rate in Tapered Roller Bearings Under Excessive Sliding Conditions , 1993 .

[10]  Tore V Vernersson,et al.  Temperatures at railway tread braking. Part 3: wheel and block temperatures and the influence of rail chill , 2007 .

[11]  A. Haji-sheikh,et al.  Heat Conduction Using Green's Function , 1992 .

[12]  B. Karlsson,et al.  Microstructural evaluation and interpretation of the mechanically and thermally affected zone under railway wheel flats , 1999 .

[13]  K. Cole,et al.  Steady-Periodic Heating of a Cylinder , 2009 .

[14]  Roger Lundén,et al.  Full-scale railway wheel flat experiments , 1999 .

[15]  W. Rohsenow,et al.  Handbook of Heat Transfer , 1998 .

[16]  Yuri A. Melnikov,et al.  Influence Functions and Matrices , 1998 .

[17]  Constantine Tarawneh,et al.  Experiments and models for the thermal response of railroad tapered-roller bearings , 2008 .

[18]  W. B. Brown,et al.  Mathematical Equations for Heat Conduction in the Fins of Air-Cooled Engines , 1923 .

[19]  Constantine Tarawneh,et al.  Dynamic Bearing Testing Aimed at Identifying the Root Cause of Warm Bearing Temperature Trending , 2008 .