Effect of filler on the oxidation protective ability of MoSi2 coating for Mo substrate by halide activated pack cementation

[1]  Hejun Li,et al.  Thermal shock resistance of thermal barrier coatings for nickel-based superalloy by supersonic plasma spraying , 2015 .

[2]  J. Perepezko.  Surface Engineering of Mo-Base Alloys for Elevated-Temperature Environmental Resistance , 2015 .

[3]  Xi-ping Guo,et al.  Co-deposition of Si and B to form oxidation-resistant coatings on an Nb–Ti–Si based ultrahigh temperature alloy by pack cementation technique , 2015 .

[4]  Ping Zhang,et al.  Improvement in oxidation resistance of silicide coating on an Nb–Ti–Si based ultrahigh temperature alloy by second aluminizing treatment , 2015 .

[5]  Hejun Li,et al.  Effect of SiC nanowires on the thermal shock resistance of joint between carbon/carbon composites and Li2O–Al2O3–SiO2 glass ceramics , 2014 .

[6]  Q. Gong,et al.  In-situ fabrication of MoSi2/SiC–Mo2C gradient anti-oxidation coating on Mo substrate and the crucial effect of Mo2C barrier layer at high temperature , 2014 .

[7]  Y. J. Kim,et al.  High temperature oxidation of molybdenum in water vapor environments , 2014 .

[8]  Dezhi Wang,et al.  Preparation and characterization of MoSi2/MoB composite coating on Mo substrate , 2014 .

[9]  Joonsik Park,et al.  Oxidation of MoSi2-Coated and Uncoated TZM (Mo–0.5Ti–0.1Zr–0.02C) Alloys under High Temperature Plasma Flame , 2013 .

[10]  A. K. Suri,et al.  Microstructure and mechanical properties of hot pressed Mo–Cr–Si–Ti in-situ composite, and oxidation behavior with silicide coatings , 2013 .

[11]  Xiping Guo,et al.  Microstructure and growth kinetics of Ce and Y jointly modified silicide coatings for Nb–Ti–Si based ultrahigh temperature alloyMicrostructure and growth kinetics of Ce and Y jointly modified silicide coatings for Nb–Ti–Si based ultrahigh temperature alloyretain--> , 2013 .

[12]  A. K. Suri,et al.  Formation of Silicide Based Oxidation Resistant Coating Over Mo-30 wt% W Alloy , 2013 .

[13]  Liu Xiping.  EFFECTS OF ACTIVATORS ON FORMATION OF Si-Zr-Y CO-DEPOSITION COATINGS ON Nb-Ti-Si-Cr BASE ULTRAHIGH TEMPERATURE ALLOY , 2012 .

[14]  S. Majumdar.  Formation of MoSi2 and Al doped MoSi2 coatings on molybdenum base TZM (Mo–0.5Ti–0.1Zr–0.02C) alloy , 2012 .

[15]  Siyong Gu,et al.  On the Oxidation Behaviors of MoSi2 at 673 – 873 K , 2011 .

[16]  Si-wen Tang,et al.  Microstructure and Oxidation Behavior of Molybdenum Disilicide Coating Prepared by Air Plasma Sprayed , 2011 .

[17]  S. Majumdar,et al.  Oxidation behavior of MoSi2 and Mo(Si, Al)2 coated Mo–0.5Ti–0.1Zr–0.02C alloy , 2011 .

[18]  A. K. Suri,et al.  Development of silicide coating over molybdenum based refractory alloy and its characterization , 2010 .

[19]  B. Venkataraman,et al.  MoSi2 coating on Mo substrate for short-term oxidation protection in air , 2009 .

[20]  I. Samajdar,et al.  Relationship Between Pack Chemistry and Growth of Silicide Coatings on Mo-TZM Alloy , 2008 .

[21]  I. Samajdar,et al.  In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM , 2008 .

[22]  A. Hoffmann,et al.  Hardening mechanisms and recrystallization behaviour of several molybdenum alloys , 2006 .

[23]  G. Kale,et al.  Development of multilayer oxidation resistant coatings on niobium and tantalum , 2006 .

[24]  J. Han,et al.  Microstructure and oxidation property of NbSi2/Si3N4 nanocomposite coating formed on Nb substrate by nitridation process followed by pack siliconizing process , 2005 .

[25]  Li-xin Song,et al.  Microstructure and mechanism of pack siliconizing on niobiurn , 2005 .

[26]  P. K. Datta,et al.  Effects of pack composition on the formation of aluminide coatings on alloy steels at 650°C , 2005 .

[27]  Mohamed S. El-Genk,et al.  A review of refractory metal alloys and mechanically alloyed-oxide dispersion strengthened steels for space nuclear power systems , 2005 .

[28]  T. Murakami,et al.  Oxidation protective silicide coating on Mo-Si-B alloys , 2005 .

[29]  T. Murakami,et al.  Oxidation behavior of Mo–9Si–18B alloy pack-cemented in a Si-base pack mixture , 2003 .

[30]  N. Nomura,et al.  Microstructure and oxidation resistance of a plasma sprayed Mo–Si–B multiphase alloy coating , 2003 .

[31]  B. Wielage,et al.  High temperature oxidation behavior of HVOF-sprayed unreinforced and reinforced molybdenum disilicide powders , 2001 .

[32]  D. Petti,et al.  Oxidation and Volatilization of TZM Alloy in Air , 2000 .

[33]  R. Suzuki,et al.  MoSi2 coating on molybdenum using molten salt , 2000 .

[34]  M. Dayananda,et al.  Growth of silicides and interdiffusion in the Mo-Si system , 1999 .

[35]  B. Mishra,et al.  Synthesis of molybdenum disilicide on molybdenum substrates , 1995 .

[36]  N. Jacobson,et al.  Volatile species in halide-activated diffusion coating packs , 1992 .

[37]  Ge Wang,et al.  Deposition and Cyclic Oxidation Behavior of a Protective ( Mo , W ) ( Si , Ge ) 2 Coating on Nb‐Base Alloys , 1992 .

[38]  R. Perkins,et al.  Development of a fused slurry silicide coating for the protection of tantalum alloys , 1974 .

[39]  R. Brown,et al.  PROTECTION OF MOLYBDENUM FROM OXIDATION BY MOLYBDENUM DISILICIDE BASED COATINGS , 1964 .