FDTD modeling and analysis of a broadband antenna suitable for oil-field imaging while drilling

This paper develops a finite-difference time-domain (FDTD) approach suitable for modeling general antenna structures which include cylindrical dipoles. The medium averaging is a key factor of the method since the FDTD grid size is comparable to the dimensions of the antenna. It is essential in the FDTD calculation to account for the effective media seen by different electric field components. The input impedance calculated by the FDTD approach agrees well with the published results for a cylindrical dipole, although only one cell in the transverse direction is assigned as the metallic conductor. This FDTD approach is then used to model and analyze a novel broadband antenna which can be used in a borehole radar system for oil-field imaging while drilling. The antenna is essentially a horizontal cut on a metallic drill collar with a vertical cylindrical dipole placed across the cut and loaded at the ends. Based on the modeling results, we found that a proper resistive loading is the key in order to increase the bandwidth of the antenna and reduce ringing. When properly loaded, the antenna has a fairly flat input impedance ranging from 50 MHz to 600 MHz. The real part of the input impedance varies favorably around 75 /spl Omega/. In addition, the input impedance of the antenna is not very sensitive to the surrounding medium. The simulated antenna radiation of the electric field shows good azimuthal discrimination. For a lossless medium with a permittivity of 20 /spl epsi//sub 0/ the front-back ratio climbs from around 15 dB at 100 MHz to about 45 dB at 600 MHz.

[1]  Yahya Rahmat-Samii,et al.  Performance analysis of antennas for hand-held transceivers using FDTD , 1994 .

[2]  Weng Cho Chew,et al.  Application of perfectly matched layers to the transient modeling of subsurface EM problems , 1997 .

[3]  H. Nickel,et al.  EXPLORING THE INTERIOR OF SALT DOMES FROM BOREHOLES , 1983 .

[4]  O. Olsson,et al.  Combined Interpretation Of Fracture Zones In Crystalline Rock Using Single-hole, Crosshole Tomography And Directional Borehole-radar Data , 1991 .

[5]  K. Yee.  Numerical solution of initial boundary value problems involving maxwell's equations in isotropic media , 1966 .

[6]  F. Harris.  On the use of windows for harmonic analysis with the discrete Fourier transform , 1978, Proceedings of the IEEE.

[7]  W. Scott,et al.  Accurate computation of the radiation from simple antennas using the finite-difference time-domain method , 1989, Digest on Antennas and Propagation Society International Symposium.

[8]  Allen Taflove,et al.  Computational Electrodynamics the Finite-Difference Time-Domain Method , 1995 .

[9]  Matthew N. O. Sadiku,et al.  Numerical Techniques in Electromagnetics , 2000 .

[10]  Roger F. Harrington,et al.  Field computation by moment methods , 1968 .

[11]  B. Beker,et al.  Detailed FD-TD analysis of electromagnetic fields penetrating narrow slots and lapped joints in thick conducting screens , 1988 .

[12]  R. Luebbers,et al.  FDTD calculation of radiation patterns, impedance, and gain for a monopole antenna on a conducting box , 1992 .

[13]  Jean-Pierre Berenger,et al.  A perfectly matched layer for the absorption of electromagnetic waves , 1994 .

[14]  A. Taflove,et al.  Calculation and experimental validation of induced currents on coupled wires in an arbitrary shaped cavity , 1987 .

[15]  F. A. Roberts,et al.  Radar Logging of a Salt Dome , 1971 .

[16]  Kwai-Man Luk,et al.  FDTD analysis of probe-fed cylindrical dielectric resonator antenna , 1998 .