An efficient multipoint 5-axis tool positioning method for tensor product surfaces

In this work, a robust tool-drop algorithm coupled with the bisection method is used to speed up the computations in the drop and tilt method (DTM), a multipoint tool positioning technique for 5-axis machining with a toroidal end mill. In the DTM, the tool is dropped on the surface along a predetermined tool-axis direction until it touches the surface tangentially. The position of the circular tool insert (pseudo-insert circle) through the first point of contact is then used to compute the tool-tilt angle that causes the tool to touch the surface tangentially at a second point. A previous implementation of DTM used Newton’s method to solve the system of equations for tilting the tool, but took many iterations and multiple initial seed solutions to converge to a valid solution for tool-tilt orientation. Using the bisection method coupled with the generalized tool-drop algorithm instead of a direct use of Newton’s method to determine the tool-tilt angle improves performance without compromising the accuracy. The method was implemented in C+ +, and a comparative study with an earlier method for several bi-quadratic and bi-cubic Bézier surfaces demonstrates the reliability of the developed method.

[1]  Paul J. Gray,et al.  Arc-intersect method for 5-axis tool positioning , 2005, Comput. Aided Des..

[2]  Sanjeev Bedi,et al.  A multipoint method for 5-axis machining of triangulated surface models , 2014, Comput. Aided Des..

[3]  Sanjeev Bedi,et al.  The edge–torus tangency problem in multipoint machining of triangulated surface models , 2016 .

[4]  Sanjeev Bedi,et al.  Optimal tool shape selection based on surface geometry for three-axis CNC machining , 2011 .

[5]  Sanjeev Bedi,et al.  Implementation of the principal-axis method for machining of complex surfaces , 1996 .

[6]  Sanjeev Bedi,et al.  Tool path planning for five-axis machining using the principal axis method , 1997 .

[7]  H.-T. Yau,et al.  Numerical control machining of triangulated sculptured surfaces in a stereo lithography format with a generalized cutter , 2004 .

[8]  Sanjeev Bedi,et al.  Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces , 2000, Comput. Aided Geom. Des..

[9]  Sanjeev Bedi,et al.  Intersection approach to multi-point machining of sculptured surfaces , 1998, Comput. Aided Geom. Des..

[10]  Sanjeev Bedi,et al.  Numeric implementation of drop and tilt method of 5-axis tool positioning for machining of triangulated surfaces , 2015 .

[11]  Sanjeev Bedi,et al.  Scallop Height of 5-axis Machining of Large Triangles with a Flat End Mill , 2015 .

[12]  Sanjeev Bedi,et al.  PII: S0890-6955(99)00058-9 , 1999 .

[13]  Paul J. Gray,et al.  Graphics-assisted Rolling Ball Method for 5-axis surface machining , 2004, Comput. Aided Des..

[14]  Sanjeev Bedi,et al.  Mechanistic modelling of the milling process using complex tool geometry , 2005 .

[15]  Peihua Gu,et al.  Recent development in CNC machining of freeform surfaces: A state-of-the-art review , 2010, Comput. Aided Des..

[16]  Sanjeev Bedi,et al.  Drop and tilt method of five-axis tool positioning for tensor product surfaces , 2017 .

[17]  Gerald Farin,et al.  Curves and surfaces for computer aided geometric design , 1990 .

[18]  Abbas Vafaeesefat,et al.  Penetration–elimination method for five-axis CNC machining of sculptured surfaces , 2007 .

[19]  Sanjeev Bedi,et al.  Toroidal versus ball nose and flat bottom end mills , 1997 .

[20]  Sanjeev Bedi,et al.  Principal curvature alignment technique for machining complex surfaces , 1997 .

[21]  Sanjeev Bedi,et al.  Numerical implementation of drop and tilt method of five-axis tool positioning for tensor product surfaces , 2018 .