论文信息 - The Effect of Microstructure on Chip Formation and Surface Defects in Microscale, Mesoscale, and Macroscale Cutting of Steel

The Effect of Microstructure on Chip Formation and Surface Defects in Microscale, Mesoscale, and Macroscale Cutting of Steel

Abstract Chip and surface samples from microscale, mesoscale, and macroscale cutting of 1045 steel revealed that workpiece microstructure plays an important role in chip formation and the formation of surface defects such as dimples. Heterogeneous finite element (FE) models at different cutting scales were developed to investigate the effect of microstructure on chip and surface dimple formation. Plastic strains were found to increase as the scale of cutting decreased. Unlike a conventional homogeneous FE model, a heterogeneous macroscale FE model showed surface defects, and predicted plastic strains near double that of a homogeneous model.

[1] Takahisa Masuzawa,et al. State of the Art of Micromachining , 2000 .

[2] M. Elbestawi,et al. Surface defects during microcutting , 2006 .

[3] Tom Childs,et al. MATERIAL PROPERTY NEEDS IN MODELING METAL MACHINING , 1998 .

[4] Toshimichi Moriwaki,et al. Combined Stress, Material Flow and Heat Analysis of Orthogonal Micromachining of Copper , 1993 .

[5] J. H. Dautzenberg,et al. Material behaviour in conditions similar to metal cutting : flow stress in the primary shear zone , 2002 .

[6] M. C. Shaw. Metal Cutting Principles , 1960 .

[7] Richard E. DeVor,et al. Machining Simulation of Ductile Iron and Its Constituents, Part 1: Estimation of Material Model Parameters and Their Validation , 2001 .

[8] Richard E. DeVor,et al. Microstructure-Level Modeling of Ductile Iron Machining , 2001, Manufacturing Engineering.

[9] Matthew A. Davies,et al. On the measurement and prediction of temperature fields In machining AISI 1045 steel , 2003 .

[10] H. Weule,et al. Micro-Cutting of Steel to Meet New Requirements in Miniaturization , 2001 .

[11] Kazuaki Iwata,et al. Chip Formation Mechanism in Single Crystal Cutting of β-Brass , 1980 .

[12] M. Elbestawi,et al. Chip formation during microscale cutting of a medium carbon steel , 2006 .