CFD evaluation of new second-skin facade concept for wind comfort on building balconies : case-study for the Park Tower in Antwerp

High wind speed around high-rise buildings can lead to wind discomfort or wind danger at building balconies. This paper presents the evaluation of a new facade concept that is intended to significantly reduce the wind speed and therefore improve wind comfort on the balconies of high-rise buildings. The concept consists of a staggered semi-open second-skin facade in front of the balconies, which partly shields them from the wind. The concept is evaluated for the new 78 m high Park Tower in the urban area of Antwerp, where it will be implemented. 3D steady Reynolds-Averaged Navier-Stokes Computational Fluid Dynamics (CFD) simulations are performed for the case with and without this facade concept. The simulations are made with the realizable k- turbulence model on a high-resolution grid. Validation is conducted using wind-tunnel measurements of surface pressure distribution on a building model with balconies. Wind comfort for the Park Tower is assessed with the Dutch wind nuisance standard NEN8100 for the case with and without the second-skin facade concept. The analysis shows that this concept is effective in providing a zone with pressure equalisation at the balconies. The related reduction in pressure gradients across the width of the facade strongly decreases the local wind speed. At many positions along the balconies this yields a wind comfort improvement of one or even two classes in the Dutch wind nuisance standard compared to the situation without implementation of this concept.

[1]  P. K. Bhargava,et al.  Effect of balconies on ventilation inducing aeromotive force on low-rise buildings , 1998 .

[2]  Yoshihide Tominaga,et al.  Comparison of various k-ε models and DSM applied to flow around a high-rise building - report on AIJ cooperative project for CFD prediction of wind environment - , 2002 .

[3]  Bert Blocken,et al.  CFD evaluation of wind speed conditions in passages between parallel buildings : effect of wall-function roughness modifications for the atmospheric boundary layer flow , 2007 .

[4]  Paul G. Tucker,et al.  Introduction to grid and mesh generation for CFD , 2001 .

[5]  Bje Bert Blocken,et al.  CFD simulation of cross-ventilation for a generic isolated building : impact of computational parameters , 2012 .

[6]  Michael Schatzmann,et al.  Some remarks on the validation of small-scale dispersion models with field and laboratory data , 1997 .

[7]  Bert Blocken,et al.  CFD simulation for pedestrian wind comfort and wind safety in urban areas: General decision framework and case study for the Eindhoven University campus , 2012, Environ. Model. Softw..

[8]  J. A. Wisse,et al.  Accuracy of assessment of wind speed in the built environment , 2002 .

[9]  Bert Blocken,et al.  CFD simulation of near-field pollutant dispersion on a high-resolution grid : a case study by LES and RANS for a building group in downtown Montreal , 2011 .

[10]  Shuzo Murakami.  Computational wind engineering , 1990 .

[11]  Nicolas G. Wright,et al.  On the use of the k–ε model in commercial CFD software to model the neutral atmospheric boundary layer , 2007 .

[12]  A. Baskaran,et al.  Investigation of air flow around buildings using computational fluid dynamics techniques , 1996 .

[13]  Patrick Rambaud,et al.  CFD modelling of small particle dispersion: The influence of the turbulence kinetic energy in the atmospheric boundary layer , 2009 .

[14]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[15]  Eddy Willemsen,et al.  Design for wind comfort in The Netherlands: Procedures, criteria and open research issues , 2007 .

[16]  Bert Blocken,et al.  Coupled urban wind flow and indoor natural ventilation modelling on a high-resolution grid: A case study for the Amsterdam ArenA stadium , 2010, Environ. Model. Softw..

[17]  Jan Carmeliet,et al.  Pedestrian Wind Environment around Buildings: Literature Review and Practical Examples , 2004 .

[18]  Xinyang Jin,et al.  New inflow boundary conditions for modelling the neutral equilibrium atmospheric boundary layer in computational wind engineering , 2009 .

[19]  Jörg Franke,et al.  The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: a summary , 2011 .

[20]  V. Dorer,et al.  Urban Physics: Effect of the micro-climate on comfort, health and energy demand , 2012 .

[21]  A Gadilhe,et al.  Numerical and experimental modelling of the three-dimensional turbulent wind flow through an urban square , 1993 .

[22]  Peter Richards,et al.  Pedestrian level wind speeds in downtown Auckland , 2002 .

[23]  Nicole Metje,et al.  Pedestrian comfort using clothing values and body temperatures , 2008 .

[24]  Jianming He,et al.  Evaluation of pedestrian winds in urban area by numerical approach , 1999 .

[25]  Bert Blocken,et al.  Ten iterative steps for model development and evaluation applied to Computational Fluid Dynamics for Environmental Fluid Mechanics , 2012, Environ. Model. Softw..

[26]  Jan Carmeliet,et al.  Pedestrian wind conditions at outdoor platforms in a high-rise apartment building: generic sub-configuration validation, wind comfort assessment and uncertainty issues , 2008 .

[27]  T. Shih,et al.  A new k-ϵ eddy viscosity model for high reynolds number turbulent flows , 1995 .

[28]  Bje Bert Blocken,et al.  Pedestrian wind comfort around a large football stadium in an urban environment: CFD simulation, validation and application of the new Dutch wind nuisance standard , 2009 .

[29]  Alessandro Parente,et al.  Improved k–ε model and wall function formulation for the RANS simulation of ABL flows , 2011 .

[30]  Bje Bert Blocken,et al.  3D CFD simulations of wind flow and wind-driven rain shelter in sports stadia: Influence of stadium geometry , 2011 .

[31]  Peter Richards,et al.  Appropriate boundary conditions for computational wind engineering models revisited , 2011 .

[32]  M Michiel Bottema,et al.  Wind climate and urban geometry , 1993 .

[33]  T. Stathopoulos,et al.  Computer simulation of wind environmental conditions around buildings , 1996 .

[34]  P. Richards,et al.  Appropriate boundary conditions for computational wind engineering models using the k-ε turbulence model , 1993 .

[35]  S. Murakami,et al.  Comparison of various revised k–ε models and LES applied to flow around a high-rise building model with 1:1:2 shape placed within the surface boundary layer , 2008 .

[36]  Yoshihide Tominaga,et al.  Cooperative project for CFD prediction of pedestrian wind environment in the Architectural Institute of Japan , 2007 .

[37]  Jon Wieringa,et al.  Updating the Davenport roughness classification , 1992 .

[38]  S. Murakami,et al.  COMPARISON OF VARIOUS TURBULENCE MODELS APPLIED TO A BLUFF BODY , 1993 .

[39]  P. Bradshaw,et al.  Momentum transfer in boundary layers , 1977 .

[40]  Michael Schatzmann,et al.  Issues with validation of urban flow and dispersion CFD models , 2011 .

[41]  Jan Carmeliet,et al.  Modification of pedestrian wind comfort in the Silvertop Tower passages by an automatic control system , 2004 .

[42]  Theodore Stathopoulos,et al.  A numerical study on the existence of the Venturi-effect in passages between perpendicular buildings , 2008 .

[43]  A. Ferreiraa,et al.  Prediction of building interference effects on pedestrian level comfort , 2002 .

[44]  Michael Schatzmann,et al.  MODEL EVALUATION GUIDANCE AND PROTOCOL DOCUMENT , 2007 .

[45]  Theodore Stathopoulos,et al.  Application of computational fluid dynamics in building performance simulation for the outdoor environment: an overview , 2011 .

[46]  Bje Bert Blocken,et al.  Pedestrian wind comfort around buildings : comparison of wind comfort criteria based on whole-flow field data for a complex case study , 2013 .

[47]  Yoshihide Tominaga,et al.  AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings , 2008 .

[48]  Michael Schatzmann,et al.  Recommendations on the use of CFD in wind engineering , 2004 .

[49]  H Hamid Montazeri,et al.  CFD simulation of wind-induced pressure coefficients on buildings with and without balconies: Validation and sensitivity analysis , 2013 .

[50]  T. Stathopoulos,et al.  CFD simulation of the atmospheric boundary layer: wall function problems , 2007 .

[51]  Jan Hensen,et al.  Application of CFD in Building Performance Simulation for the Outdoor Environment: an Overview , 2011 .

[52]  J. W. Verkaik.  On Wind and Roughness over Land , 2006 .

[53]  J. W. Verkaik.  Evaluation of Two Gustiness Models for Exposure Correction Calculations , 2000 .

[54]  Theodore Stathopoulos,et al.  Pedestrian Level Winds and Outdoor Human Comfort , 2006 .

[55]  Akashi Mochida,et al.  Prediction of wind environment and thermal comfort at pedestrian level in urban area , 2006 .

[56]  Anthony J. Jakeman,et al.  Ten iterative steps in development and evaluation of environmental models , 2006, Environ. Model. Softw..

[57]  Bje Bert Blocken,et al.  A venturi-shaped roof for wind-induced natural ventilation of buildings: wind tunnel and CFD evaluation of different design configurations , 2011 .

[58]  S. Takakura,et al.  Numerical Simulation of Flowfield around Buildings in an Urban Area , 1993 .

[59]  Bje Bert Blocken,et al.  On the effect of wind direction and urban surroundings on natural ventilation of a large semi-enclosed stadium , 2010 .

[60]  D. Grawe,et al.  BEST PRACTICE GUIDELINE FOR THE CFD SIMULATION OF FLOWS IN THE URBAN ENVIRONMENT , 2007 .