Bioactivity and cytocompatibility of zirconia (ZrO(2)) films fabricated by cathodic arc deposition.

Zirconium oxide thin films were fabricated on silicon wafers using a filtered cathodic arc system in concert with oxygen plasma. The structure and phase composition of the zirconium oxide thin films were characterized by atomic force microscopy (AFM), X-ray diffraction (XRD), Rutherford backscattering spectrometry (RBS), and transmission electron microscopy (TEM). The bioactivity was assessed by investigating the formation of apatite on the film surface after soaking in simulated body fluids. Bone marrow mesenchymal stem cells (BMMSC) were used to further evaluate the cytocompatibility of the materials. The results indicate that the films are composed of stoichiometric ZrO(2) and the composition is quite uniform throughout the thickness. Bone-like apatite can be formed on the surface of the ZrO(2) thin film in our SBF immersion experiments, suggesting that the surface is bioactive. The outermost layer of the ZrO(2) thin film comprises nano-sized particles that can be identified by AFM images taken on the thin film surface and TEM micrographs obtained from the interface between the ZrO(2) thin film and apatite layer. The nanostructured surface is believed to be the key factor that apatite is induced to precipitate on the surface. Bone marrow mesenchymal stem cells are observed to grow and proliferate in good states on the film surface. Our results show that ZrO(2) thin films fabricated by cathodic arc deposition exhibit favorable bioactivity and cytocompatibility.

[1]  C. Maniatopoulos,et al.  Bone formation in vitro by stromal cells obtained from bone marrow of young adult rats , 1988, Cell and Tissue Research.

[2]  Tronc,et al.  Size Tailoring of Magnetite Particles Formed by Aqueous Precipitation: An Example of Thermodynamic Stability of Nanometric Oxide Particles. , 1998, Journal of colloid and interface science.

[3]  Hyoun‐Ee Kim,et al.  Porous ZrO2 bone scaffold coated with hydroxyapatite with fluorapatite intermediate layer. , 2003, Biomaterials.

[4]  Takashi Nakamura,et al.  Apatite-forming ability of a zirconia/alumina nano-composite induced by chemical treatment. , 2002, Journal of biomedical materials research.

[5]  K. Nakamoto.  Infrared and Raman Spectra of Inorganic and Coordination Compounds , 1978 .

[6]  Pettersson,et al.  Electrosteric Stabilization of Al(2)O(3), ZrO(2), and 3Y-ZrO(2) Suspensions: Effect of Dissociation and Type of Polyelectrolyte. , 2000, Journal of colloid and interface science.

[7]  T Kitsugi,et al.  Solutions able to reproduce in vivo surface-structure changes in bioactive glass-ceramic A-W. , 1990, Journal of Biomedical Materials Research.

[8]  C. Piconi,et al.  Zirconia as a ceramic biomaterial. , 1999, Biomaterials.

[9]  Jillian F. Banfield,et al.  Enhanced adsorption of molecules on surfaces of nanocrystalline particles , 1999 .

[10]  C. Serna,et al.  Optical constants of tetragonal and cubic zirconias in the infrared , 1996 .

[11]  T. Moritz,et al.  Influence of the surface charge on the permeate flux in the dead-end filtration with ceramic membranes , 2001 .

[12]  K. Khor,et al.  Effects of incorporation of HA/ZrO(2) into glass ionomer cement (GIC). , 2005, Biomaterials.

[13]  K. S. Mazdiyasni,et al.  Infrared and Raman Spectra of Zirconia Polymorphs , 1971 .

[14]  J. Chevalier,et al.  What future for zirconia as a biomaterial? , 2006, Biomaterials.

[15]  A. J. McQuillan,et al.  An Infrared Spectroscopic Study of Carbonate Adsorption to Zirconium Dioxide Sol−Gel Films from Aqueous Solutions , 1997 .

[16]  P. Chu,et al.  Plasma-treated nanostructured TiO(2) surface supporting biomimetic growth of apatite. , 2005, Biomaterials.

[17]  J. Ong,et al.  Deposition of highly adhesive ZrO(2) coating on Ti and CoCrMo implant materials using plasma spraying. , 2003, Biomaterials.

[18]  Jing-Juan Xu,et al.  ZrO(2) gel-derived DNA-modified electrode and the effect of lanthanide on its electron transfer behavior. , 2002, Bioelectrochemistry.

[19]  M. Ferraris,et al.  Coatings on zirconia for medical applications. , 2000, Biomaterials.

[20]  M. Ferraris,et al.  In vitro characterisation of zirconia coated by bioactive glass. , 2001, Biomaterials.

[21]  Takashi Nakamura,et al.  Structural Dependence of Apatite Formation on Zirconia Gels in a Simulated Body Fluid , 2002 .

[22]  Xuanyong Liu,et al.  Plasma-sprayed wollastonite 2M/ZrO2 composite coating , 2003 .

[23]  J. Méndez-vivar,et al.  Control of the polymerization process of multicomponent (Si, Ti, Zr) sols using chelating agents , 2001 .

[24]  P. Chu,et al.  Effects of cathode materials and arc current on optimal bias of a cathodic arc through a magnetic duct , 2002 .

[25]  F. Rustichelli,et al.  Osteointegration of bioactive glass-coated zirconia in healthy bone: an in vivo evaluation. , 2002, Biomaterials.

[26]  J. Weng,et al.  Formation and characteristics of the apatite layer on plasma-sprayed hydroxyapatite coatings in simulated body fluid. , 1997, Biomaterials.

[27]  O. Sbaizero,et al.  Deposition of calcium ions on rutile (110): a first-principles investigation , 2001 .

[28]  Ningning Zhu,et al.  Electrochemical detection of DNA hybridization using methylene blue and electro-deposited zirconia thin films on gold electrodes , 2004 .

[29]  P. Andrew,et al.  Sensitivities of Human Monocytes and Epithelial Cells to Pneumolysin Are Different , 2002, Infection and Immunity.

[30]  T. Mallouk,et al.  A “Mix and Match” Ionic−Covalent Strategy for Self-Assembly of Inorganic Multilayer Films , 1997 .

[31]  L. Canham,et al.  Apatite Nucleation on Low Porosity Silicon in Acellular Simulated Body Fluids , 1995 .

[32]  Takashi Nakamura,et al.  Apatite formation on zirconium metal treated with aqueous NaOH. , 2002, Biomaterials.