An Attempt to Model the Human Body as a Communication Channel

Using the human body as a transmission medium for electrical signals offers novel data communication in biomedical monitoring systems. In this paper, galvanic coupling is presented as a promising approach for wireless intra-body communication between on-body sensors. The human body is characterized as a transmission medium for electrical current by means of numerical simulations and measurements. Properties of dedicated tissue layers and geometrical body variations are investigated, and different electrodes are compared. The new intra-body communication technology has shown its feasibility in clinical trials. Excellent transmission was achieved between locations on the thorax with a typical signal-to-noise ratio (SNR) of 20 dB while the attenuation increased along the extremities.

[1]  C. E. SHANNON,et al.  A mathematical theory of communication , 1948, MOCO.

[2]  D. B. Heppner,et al.  Considerations of quasi-stationarity in electrophysiological systems. , 1967, The Bulletin of mathematical biophysics.

[3]  B. Brown,et al.  Applied potential tomography. , 1989, Journal of the British Interplanetary Society.

[4]  Thoams Guthrie Zimmerman.  Personal area networks (PAN) : near-field intra-body communication , 1995 .

[5]  R. W. Lau,et al.  The dielectric properties of biological tissues: III. Parametric models for the dielectric spectrum of tissues. , 1996, Physics in medicine and biology.

[6]  Yoshinobu Tonomura,et al.  “Body coupled FingerRing”: wireless wearable keyboard , 1997, CHI.

[7]  Shuichi Shoji,et al.  A very low-power consumption wireless ECG monitoring system using body as a signal transmission medium , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[8]  A. Ahlbom.  Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz) , 1998 .

[9]  Gaetano Borriello,et al.  Empirical measurements of intrabody communication performance under varied physical configurations , 2001, UIST '01.

[10]  William R B Lionheart,et al.  A Matlab toolkit for three-dimensional electrical impedance tomography: a contribution to the Electrical Impedance and Diffuse Optical Reconstruction Software project , 2002 .

[11]  Michael Oberle,et al.  Low power systems-on-chip for biomedical applications , 2002 .

[12]  David Isaacson,et al.  Electrical Impedance Tomography , 2002, IEEE Trans. Medical Imaging.

[13]  H. Hosaka,et al.  Development and performance analysis of an intra-body communication device , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[14]  M. Shinagawa,et al.  A near-field-sensing transceiver for intra-body communication based on the electro-optic effect , 2003, Proceedings of the 20th IEEE Instrumentation Technology Conference (Cat. No.03CH37412).

[15]  A. Sasaki,et al.  Sensitive and stable electro-optic sensor for intrabody communication , 2004, The 17th Annual Meeting of the IEEELasers and Electro-Optics Society, 2004. LEOS 2004..

[16]  H. Hosaka,et al.  Simplified circuit modeling and fabrication of intrabody communication devices , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[17]  Keller,et al.  A 3 D transient model for transcutaneous functional electrical stimulation , 2005 .

[18]  Masaharu Takahashi,et al.  Study on the Transmission Mechanism for Wearable Device Using the Human Body as a Transmission Channel , 2005, IEICE Trans. Commun..

[19]  N. Felber,et al.  Measurement System for the Characterization of the Human Body as a Communication Channel at Low Frequency , 2005, 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference.

[20]  P. Savard,et al.  Impedance tomography: Computational analysis based on finite element models of a cylinder and a human thorax , 2006, Annals of Biomedical Engineering.

[21]  Lawrence M Knuckey,et al.  EPSM 2005 Workshop - IEC 60601-1: Medical Electrical Equipment - Part 1: General Requirements for Basic Safety and Essential Performance - 3rd Edition 2005 , 2006 .