A heater-integrated transparent microchannel chip for continuous-flow PCR

Abstract A microchannel chip for continuous-flow polymerase chain reaction (PCR) was developed using transparent materials. The microchannel was fabricated on a quartz glass substrate using standard photolithography and wet-etching techniques and was sealed by another quartz glass substrate. Two indium-tin-oxide (ITO) films were deposited on the etched substrate as a thermal source. To confirm the temperature distribution in the microchannel, we measured the fluorescence spectra of an aqueous solution of 1-pyrenesulfonic acid sodium salt (PS-Na), which is a temperature-indicator dye, in the microchannel under a continuous solution flow. The results confirm that the temperature distribution on the microchannel’s ITO films was almost uniform (within ±2 °C) under two flow rates (56 and 152 nl/min). The slightness of this deviation indicates that the ITO films integrated into the microchannel chip can be very useful as a thermal source for PCR. An amplification of a 450 bp segment of Escherichia coli HB101 was successfully performed by two-stage (94 and 67 °C) thermal cycling on the chip device.

[1]  M. A. Northrup,et al.  Functional integration of PCR amplification and capillary electrophoresis in a microfabricated DNA analysis device. , 1996, Analytical chemistry.

[2]  Russell Higuchi,et al.  Kinetic PCR Analysis: Real-time Monitoring of DNA Amplification Reactions , 1993, Bio/Technology.

[3]  Martin A. M. Gijs,et al.  Development of novel low temperature bonding technologies for microchip chemical analysis applications , 2000 .

[4]  S. Jacobson,et al.  Integrated system for rapid PCR-based DNA analysis in microfluidic devices. , 2000, Analytical chemistry.

[5]  S. Jacobson,et al.  Multiple sample PCR amplification and electrophoretic analysis on a microchip. , 1998, Analytical chemistry.

[6]  L J Kricka,et al.  Degenerate oligonucleotide primed-polymerase chain reaction and capillary electrophoretic analysis of human DNA on microchip-based devices. , 1998, Analytical biochemistry.

[7]  Hiroaki Nakanishi,et al.  Condition optimization, reliability evaluation of SiO2-SiO2 HF bonding and its application for UV detection micro flow cell , 2000 .

[8]  J P Landers,et al.  Infrared-mediated thermocycling for ultrafast polymerase chain reaction amplification of DNA. , 1998, Analytical chemistry.

[9]  L J Kricka,et al.  Chip PCR. I. Surface passivation of microfabricated silicon-glass chips for PCR. , 1996, Nucleic acids research.

[10]  J. Köhler,et al.  Miniaturized flow-through PCR with different template types in a silicon chip thermocycler. , 2001, Lab on a chip.

[11]  A Manz,et al.  Chemical amplification: continuous-flow PCR on a chip. , 1998, Science.

[12]  V W Weedn,et al.  Real-time microchip PCR for detecting single-base differences in viral and human DNA. , 1998, Analytical chemistry.

[13]  T. B. Morrison,et al.  Quantification of low-copy transcripts by continuous SYBR Green I monitoring during amplification. , 1998, BioTechniques.

[14]  S. Shoji,et al.  Studies on SiO2–SiO2 bonding with hydrofluoric acid. Room temperature and low stress bonding technique for MEMS , 2000 .

[15]  R. Mathies,et al.  Monolithic integrated microfluidic DNA amplification and capillary electrophoresis analysis system , 2000 .

[16]  M. A. Northrup,et al.  A miniature analytical instrument for nucleic acids based on micromachined silicon reaction chambers. , 1998, Analytical chemistry.

[17]  A. Yamaguchi,et al.  Reversible phase transitions in polymer gels induced by radiation forces , 2000, Nature.