The simulation of the impact damage to fruit during the passage of a truck over a speed bump by means of the discrete element method

The discrete element method (DEM) was used to study fruit damage during transportation. The DEM is a particle-based simulation technique which is well suited for the solution of granular material related problems in food and agriculture. In this paper, the application of DEM to food transport problems was demonstrated by simulation of bruising to apples stored in bulk bins during the passage of a truck over a speed bump. The effects of truck load, bulk bin position, suspension type and driving speed on damage were investigated. The simulations showed that higher truck loads lead to less bruising and that apples in bulk bins behind the rear axle suffered more damage than those in bulk bins in front of the rear axle. Furthermore, a considerable reduction in the damage was predicted in simulations where the truck has a soft suspension. Independent of truck load, suspension type and bulk bin position, the commercially significant bruising (i.e. apples with bruise volume of maximum bruise above 500 mm3) was predicted to be insignificant for driving speeds below 20 km h−1. At higher driving speeds, the extent of commercially acceptable bruising depended on various parameters. A reduction in the driving speed, an increase in the truck load and a reduction in the suspension stiffness all helped to reduce the occurrence of fruit damage.

[1]  J. De Baerdemaeker,et al.  Determining tangential contact force model parameters for viscoelastic materials (apples) using a rheometer , 2004 .

[2]  G. Kuwabara,et al.  Restitution Coefficient in a Collision between Two Spheres , 1987 .

[3]  J. De Baerdemaeker,et al.  Discrete element modelling for process simulation in agriculture , 2003 .

[4]  J. E. Holt,et al.  A theoretical and experimental analysis of the effects of suspension and road profile on bruising in multilayered apple packs , 1985 .

[5]  Geert Lombaert,et al.  The experimental validation of a numerical model for the prediction of the vibrations in the free field produced by road traffic , 2003 .

[6]  David C. Slaughter,et al.  VIBRATION OF FRESH FRUITS AND VEGETABLES DURING REFRIGERATED TRUCK TRANSPORT , 1993 .

[7]  P. R. Armstrong,et al.  Apple Damage in Bulk Bins During Semi-trailer Transport , 1996 .

[8]  J Page.  Dynamic behaviour of a single axle vehicle suspension system: a theoretical study , 1973 .

[9]  H. Ramon,et al.  The discrete element method (DEM) to simulate fruit impact damage during transport and handling: Case study of vibration damage during apple bulk transport , 2006 .

[10]  N. Mohsenin.  Physical properties of plant and animal materials , 1970 .

[11]  Herman Ramon,et al.  The effect of fruit factors on the bruise susceptibility of apples , 2007 .

[12]  J. E. Holt,et al.  A model to predict damage to horticultural produce duringtransport , 1991 .

[13]  David Cebon,et al.  Interaction Between Heavy Vehicles and Roads , 1993 .

[14]  J. A. Bartsch,et al.  Impact Parameters Related to Post Harvest Bruising of Apples , 1989 .

[15]  Geert Lombaert,et al.  Numerical modelling of free field traffic-induced vibrations , 2000 .

[16]  Herman Ramon,et al.  Determination of the dynamical behaviour of biological materials during impact using a pendulum device , 2003 .

[17]  Herman Ramon,et al.  Torsion of viscoelastic spheres in contact , 2005 .

[18]  L. Ragni,et al.  Damage to pears caused by simulated transport , 2005 .

[19]  Herman Ramon,et al.  Torsional stiffness of viscoelastic spheres in contact , 2004 .

[20]  Herman Ramon,et al.  Determination of parameters of a tangential contact force model for viscoelastic spheroids (fruits) using a rheometer device , 2005 .

[21]  H. Ramon,et al.  The discrete element method (DEM) to simulate fruit impact damage during transport and handling: Model building and validation of DEM to predict bruise damage of apples , 2006 .

[22]  M. V. Zeebroeck.  The Discrete Element Method (DEM) to simulate fruit impact damage during transport and handling , 2005 .