Thermal Performance of Carbon Nanotube-Based Composites Investigated by Molecular Dynamics Simulation

Due to its remarkable properties, carbon nanotube (CNT) was widely used in different areas, especially in electronic packaging for the improvement of the adhesion and thermal conductivity. CNT as an emerging thermal interface material (TIM) is now widely used to improve thermal dissipation in electronic packaging. CNT array as TIM is suffering from poor adhesion between CNTs and substrate in packages during fabrication and assembly, which is a large issue for the material performance of CNTs and the reliability of packages. To apply CNTs in electronic packaging, it is important for us to find optimal structure of CNT based materials with high thermal performance and good adhesion. Understanding of thermal performance of these structures at a nanoscale is becoming necessary and attractive. Molecular dynamics (MD) simulation is a proper method to study these material properties of CNT based materials. In this study MD simulations were conducted to investigate the thermal conduction of CNT and interfacial thermal resistance between CNT and the copper substrate. MD models were built using the Materials studio software (Accelrys, Inc). Based on Fourier's law, interfacial thermal conduction between CNTs and the copper substrate was calculated. The MD simulation results showed that the functionalization of CNT have an effect on both the interfacial resistance and intrinsic tube conductivity, which reduced interfacial thermal resistance and degraded the intrinsic thermal conductivity of CNT. This MD simulation gave a basic understanding of the effect of functionalization on thermal performance of CNTs and provided information for the assembly of CNT in electronic packaging

[1]  Juekuan Yang,et al.  Molecular dynamics simulation of thermal conductivity of single-wall carbon nanotubes , 2006 .

[2]  M. Yuen,et al.  A new approach in measuring Cu-EMC adhesion strength by AFM [electronics packaging applications] , 2004, 2004 Proceedings. 54th Electronic Components and Technology Conference (IEEE Cat. No.04CH37546).

[3]  P. Keblinski,et al.  Effect of chemical functionalization on thermal transport of carbon nanotube composites , 2004 .

[4]  S. Sinnott,et al.  Modification of carbon nanotube-polystyrene matrix composites through polyatomic-ion beam deposition: predictions from molecular dynamics simulations , 2003 .

[5]  M. Yuen,et al.  Molecular Dynamics Study on Thermal Performance of CNT-array-Thermal Interface Material , 2006, 2006 International Conference on Electronic Materials and Packaging.

[6]  S. Maruyama.  A MOLECULAR DYNAMICS SIMULATION OF HEAT CONDUCTION OF A FINITE LENGTH SINGLE-WALLED CARBON NANOTUBE , 2003 .

[7]  T. Gates,et al.  Modeling of interfacial modification effects on thermal conductivity of carbon nanotube composites , 2006 .

[8]  M. Yuen,et al.  A New Approach in Measuring Cu–EMC Adhesion Strength by AFM , 2006, IEEE Transactions on Components and Packaging Technologies.

[9]  L. Forró,et al.  Effect of electron irradiation on the electrical properties of fibers of aligned single-walled carbon nanotubes , 2003 .

[10]  M. Yuen,et al.  Effect of defects on thermal performance of carbon nanotube investigated by molecular dynamics simulation , 2006, 2006 International Conference on Electronic Materials and Packaging.

[11]  Charles M. Lieber,et al.  Resonant electron scattering by defects in single-walled carbon nanotubes. , 2001, Science.

[12]  M. Radosavljevic,et al.  Carbon nanotube composites for thermal management , 2002, cond-mat/0205418.

[13]  Baowen Li,et al.  Thermal conduction of carbon nanotubes using molecular dynamics , 2005 .

[14]  Stanislaus S. Wong,et al.  Covalent Surface Chemistry of Single‐Walled Carbon Nanotubes , 2005 .

[15]  Changhong Liu,et al.  Aligned Carbon Nanotube Composite Films for Thermal Management , 2005 .

[16]  T. Ikeshoji,et al.  Non-equilibrium molecular dynamics calculation of heat conduction in liquid and through liquid-gas interface , 1994 .

[17]  Mohamed A. Osman,et al.  Temperature dependence of the thermal conductivity of single-wall carbon nanotubes , 2001 .

[18]  A. Hirsch.  Functionalization of single-walled carbon nanotubes. , 2002, Angewandte Chemie.

[19]  Clifford W. Padgett,et al.  Influence of Chemisorption on the Thermal Conductivity of Single-Wall Carbon Nanotubes , 2004 .

[20]  Lingbo Zhu,et al.  Well-aligned open-ended carbon nanotube architectures: an approach for device assembly. , 2006, Nano letters.

[21]  M. Stratmann,et al.  New Adhesion Promoters for Copper Leadframes and Epoxy Resin , 2000 .