Modeling and simulating a microelectromechanical system microsupercapacitor

A mathematical model for double-layer and faradaic processes in microsupercapacitor using finite element analysis is presented here. Different from previous work, the mathematical model here can be applied to an asymmetric geometrical model, other than traditional layer-to-layer structure. COMSOL Multiphysics 4.2 software is used to solve the system of partial differential equations, in order to simulate the electrochemical reactions in the electrodes of the microsupercapacitor dynamically. A microsupercapacitor was designed and fabricated according to the geometrical model, and charge/discharge curves were obtained by the galvanostatic charge/discharge test. The potential curves show good agreement with the simulation results and display the typical behavior of a steady voltage rise and subsequently a steady voltage drop during a cycle of charge and discharge. Besides, the H+ ion concentration profile development during charge and discharge can also be obtained through the simulation. Thus, the mode in this work can play a significant role in studying the detailed electrochemical process and predicting the performance of the supercapacitor.

[1]  Ralph E. White,et al.  Prediction of the Current Density at an Electrode at Which Multiple Electrode Reactions Occur under Potentiostatic Control , 1983 .

[2]  F. Gobal,et al.  Theoretical analysis of the performance of a model supercapacitor consisting of metal oxide nano-particles , 2007 .

[3]  John Newman,et al.  The Influence of Side Reactions on the Performance of Electrochemical Double‐Layer Capacitors , 1996 .

[4]  Ralph E. White,et al.  A Mathematical Model of an Electrochemical Capacitor with Double‐Layer and Faradaic Processes , 1999 .

[5]  W. O'grady,et al.  Irreversible Voltammetric Behavior of the (100) IrO2 Single‐Crystal Electrodes in Sulfuric Acid Medium , 1985 .

[6]  Svein Sunde,et al.  Monte Carlo Simulations of Conductivity of Composite Electrodes for Solid Oxide Fuel Cells , 1996 .

[7]  J. Tarascon,et al.  Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells , 1996 .

[8]  Jim P. Zheng,et al.  Electrochemical Capacitors Using Hydrous Ruthenium Oxide and Hydrogen Inserted Ruthenium Oxide , 1998 .

[9]  F. Gobal,et al.  A mathematical model of nanoparticulate mixed oxide pseudocapacitors; part II: the effects of intrinsic factors , 2011 .

[10]  M. Doyle,et al.  Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .

[11]  D. Wheeler,et al.  Modeling of lithium-ion batteries , 2003 .

[12]  F. Gobal,et al.  A mathematical model of nanoparticulate mixed oxide pseudocapacitors; part I: model description and particle size effects , 2009 .

[13]  Ralph E. White,et al.  Mathematical model of a lithium/polypyrrole cell , 1990 .

[14]  Karen E. Thomas,et al.  Mathematical Modeling of Lithium Batteries , 2002 .