Maskless photolithography using UV LEDs.

A UV light emitting diode (LED) with a maximum output of 372 nm was collimated using a pinhole and a small plastic tube and focused using a microscope objective onto a substrate for direct lithographic patterning of the photoresist. Movement of the substrate with a motorised linear stage (syringe pump) allowed lines in SU-8 to be pattered with a width down to 35 microm at a linear velocity of 80 microm s(-1), while in the dry film resist Ordyl SY 330, features as narrow as 17 microm were made at a linear velocity of 245 microm s(-1). At this linear velocity, a 75 mm long feature could be patterned in 5 min. Functional microfluidic devices were made by casting PDMS on a master made by LED lithography. The results show that UV LEDs are a suitable light source for direct writing lithography, offering a budget friendly, and high resolution alternative for rapid prototyping of features smaller than 20 microm.

[1]  Steven A. Soper,et al.  Evaluation of micromilled metal mold masters for the replication of microchip electrophoresis devices , 2006 .

[2]  Hong-Yan. Yuan,et al.  CE detector based on light‐emitting diodes , 2007, Electrophoresis.

[3]  Uwe Karst,et al.  Recent developments in optical detection methods for microchip separations , 2006, Analytical and bioanalytical chemistry.

[4]  C. O'Mathúna,et al.  Rapid fabrication of microfluidic devices in poly(dimethylsiloxane) by photocopying. , 2001, Lab on a chip.

[5]  E. Carrilho,et al.  A toner-mediated lithographic technology for rapid prototyping of glass microchannels. , 2007, Lab on a chip.

[6]  G. Whitesides,et al.  Fabrication of Ordered Two‐Dimensional Arrays of Micro‐ and Nanoparticles Using Patterned Self‐Assembled Monolayers as Templates , 1999 .

[7]  Holger Becker,et al.  Polymer microfabrication technologies for microfluidic systems , 2008, Analytical and bioanalytical chemistry.

[8]  G Medoro,et al.  Microfluidic channel fabrication in dry film resist for production and prototyping of hybrid chips. , 2005, Lab on a chip.

[9]  大房 健.  基礎講座 電気泳動(Electrophoresis) , 2005 .

[10]  M. Madou.  Fundamentals of microfabrication : the science of miniaturization , 2002 .

[11]  M. Macka,et al.  Performance of a simple UV LED light source in the capillary electrophoresis of inorganic anions with indirect detection using a chromate background electrolyte. , 2002, The Analyst.

[12]  R. Yoshida,et al.  Maskless microfabrication of thermosensitive gels using a microscope and application to a controlled release microchip. , 2006, Lab on a chip.

[13]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[14]  C. Effenhauser,et al.  Integrated capillary electrophoresis on flexible silicone microdevices:  analysis of DNA restriction fragments and detection of single DNA molecules on microchips. , 1997, Analytical chemistry.

[15]  Simple and rapid methods for the fabrication of polymeric and glass chips for using in analytical chemistry. , 2007, Analytica chimica acta.