Immobilization of individual cells by local photo-polymerization on a chip.

A novel separation method for random screening of target cells from a large heterogeneous population by using a local photo-polymerization is developed. A photo-crosslinkable resin solution is mixed with the sample liquid and we controlled the state from sol to gel by irradiating the near ultraviolet (UV) light with the mercury lamp and He-Cd laser near the target cell. We applied three types of immobilization methods such as direct immobilization method, caging method, and direct immobilization with position control method. The selected cell is immobilized in the cured resin directly or inside the cage of the cured resin. In the position control method, laser tweezers are employed to manipulate the target cell indirectly by using the droplet of the resin as a microtool. The cell is positioned properly by the laser manipulation system and is immobilized in the polymerized resin. After the selected cells are immobilized we can easily remove the other objects by the cleaning flow in the microchannel since the polymerized resin strongly binds with the cover glass and resists more than 466 mm s(-1) flow speed in the microchannel (microchannel size: width is 500 micron and depth is 100 micron). We tested the mercury lamp as well as the He-Cd laser for UV-light irradiation at the local area and confirmed improvement of resolution of the cured area by using the He-Cd laser (from 7 micron to 5 micron). Based on this method, we succeeded in single cell immobilization and basic experiments such as culture and fluorescent dyeing of immobilized yeast cells.

[1]  S. Gawad,et al.  Micromachined impedance spectroscopy flow cytometer for cell analysis and particle sizing. , 2001, Lab on a chip.

[2]  Fumihito Arai,et al.  Synchronized laser micromanipulation of multiple targets along each trajectory by single laser , 2004 .

[3]  E. Delamarche,et al.  Patterned delivery of immunoglobulins to surfaces using microfluidic networks. , 1997, Science.

[4]  Y Wakamoto,et al.  On-chip culture system for observation of isolated individual cells. , 2001, Lab on a chip.

[5]  A. Ashkin,et al.  Optical trapping and manipulation of viruses and bacteria. , 1987, Science.

[6]  Kenji Yasuda,et al.  On-chip single-cell microcultivation assay for monitoring environmental effects on isolated cells. , 2003, Biochemical and biophysical research communications.

[7]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[8]  W. Benecke,et al.  Linear motion of dielectric particles and living cells in microfabricated structures induced by traveling electric fields , 1991, [1991] Proceedings. IEEE Micro Electro Mechanical Systems.

[9]  Fumihito Arai,et al.  Isolation and extraction of target microbes using thermal sol-gel transformation. , 2003, The Analyst.

[10]  C. Effenhauser,et al.  Integrated capillary electrophoresis on flexible silicone microdevices:  analysis of DNA restriction fragments and detection of single DNA molecules on microchips. , 1997, Analytical chemistry.

[11]  Fumihito Arai,et al.  High‐speed separation system of randomly suspended single living cells by laser trap and dielectrophoresis , 2001, Electrophoresis.

[12]  Fumihito Arai,et al.  Pinpoint injection of microtools for minimally invasive micromanipulation of microbe by laser trap , 2003 .

[13]  G. Whitesides,et al.  Components for integrated poly(dimethylsiloxane) microfluidic systems , 2002, Electrophoresis.

[14]  Ryutaro Maeda,et al.  A pneumatically-actuated three-way microvalve fabricated with polydimethylsiloxane using the membrane transfer technique , 2000 .

[15]  T. Katsuragi,et al.  Single‐Cell Sorting of Microorganisms by Flow or Slide‐Based (Including Laser Scanning) Cytometry , 2001 .