Quantitative methods for comparing different HVAC control schemes

Experimentally comparing the energy usage and comfort characteristics of different controllers in heating, ventilation, and air-conditioning (HVAC) systems is difficult because variations in weather and occupancy conditions preclude the possibility of establishing equivalent experimental conditions across the order of hours, days, and weeks. This paper is concerned with defining quantitative metrics of energy usage and occupant comfort, which can be computed and compared in a rigorous manner that is capable of determining whether differences between controllers are statistically significant in the presence of such environmental fluctuations. Experimental case studies are presented that compare two alternative controllers (a schedule controller and a hybrid system learning-based model predictive controller) to the default controller in a building-wide HVAC system. Lastly, we discuss how our proposed methodology may also be able to quantify the efficiency of other building automation systems.

[1]  S. Shankar Sastry,et al.  Provably safe and robust learning-based model predictive control , 2011, Autom..

[2]  Standard Ashrae.  Thermal Environmental Conditions for Human Occupancy , 1992 .

[3]  George J. Pappas,et al.  Receding-horizon supervisory control of green buildings , 2011, Proceedings of the 2011 American Control Conference.

[4]  B. Efron.  Nonparametric standard errors and confidence intervals , 1981 .

[5]  David E. Culler,et al.  Energy-Efficient Building HVAC Control Using Hybrid System LBMPC , 2012, ArXiv.

[6]  Philip Haves,et al.  Model predictive control for the operation of building cooling systems , 2010, Proceedings of the 2010 American Control Conference.

[7]  A. Wald.  Sequential Tests of Statistical Hypotheses , 1945 .

[8]  Manfred Morari,et al.  Use of model predictive control and weather forecasts for energy efficient building climate control , 2012 .

[9]  S. P. Wright,et al.  Adjusted P-values for simultaneous inference , 1992 .

[10]  David E. Culler,et al.  A living laboratory study in personalized automated lighting controls , 2011, BuildSys '11.

[11]  Oar,et al.  International Performance Measurement and Verification Protocol , 2014 .

[12]  B. K. Ghosh,et al.  Handbook of sequential analysis , 1991 .

[13]  Francesco Borrelli,et al.  Bilinear Model Predictive Control of a HVAC System Using Sequential Quadratic Programming , 2011 .

[14]  Thorsten Dickhaus,et al.  Simultaneous Statistical Inference , 2014, Springer Berlin Heidelberg.

[15]  David E. Claridge,et al.  Development of a Toolkit for Calculating Linear, Change–Point Linear and Multiple–Linear Inverse Building Energy Analysis Models, ASHRAE Research Project 1050-RP, Detailed Test Results , 2001 .

[16]  David E. Culler,et al.  Identifying models of HVAC systems using semiparametric regression , 2012, 2012 American Control Conference (ACC).

[17]  Prabir Barooah,et al.  Agent-based and graphical modelling of building occupancy , 2012 .

[18]  David E. Culler,et al.  Reducing Transient and Steady State Electricity Consumption in HVAC Using Learning-Based Model-Predictive Control , 2012, Proceedings of the IEEE.

[19]  Frauke Oldewurtel,et al.  Experimental analysis of model predictive control for an energy efficient building heating system , 2011 .

[20]  W. González-Manteiga,et al.  Bootstrap tests for nonparametric comparison of regression curves with dependent errors , 2007 .

[21]  Adam Krzyzak,et al.  A Distribution-Free Theory of Nonparametric Regression , 2002, Springer series in statistics.