A numerical study on the influence of particle shape on hopper discharge within the polyhedral and multi-sphere discrete element method

Abstract In this study 3D DEM-simulations of hopper discharge using non-cohesive, monodisperse spherical and polyhedral particles as well as particle shapes generated by the multi-sphere method are carried out. For this purpose an overview of the Common Plane algorithm for contact detection between polyhedral particles is given and an important refinement of the contact point definition is presented. In the hopper the effect of increasing particle angularity on the flow properties is investigated. Moreover, three different hopper designs are chosen, to further examine the influence of hopper angle and hopper opening size on the flow properties in combination with varying particle shapes. It is demonstrated that particles with an increasing angularity reduce the mass flow rate from the hopper and in case of the flat bottom hopper (α = 0°) increase the residual quantity after discharge. In all simulations significant differences between polyhedral and clustered particles were observed, which indicates that the type of particle shape approximation is a parameter that has to be considered in DEM-simulations of hopper discharge.

[1]  Y. Tsuji,et al.  Discrete particle simulation of two-dimensional fluidized bed , 1993 .

[2]  Sunun Limtrakul,et al.  DEM modeling and simulation of a catalytic gas–solid fluidized bed reactor: a spouted bed as a case study , 2004 .

[3]  F. Maio,et al.  Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes , 2004 .

[4]  Tom Dyakowski,et al.  Flow of sphero-disc particles in rectangular hoppers - A DEM and experimental comparison in 3D , 2004 .

[5]  Paul W. Cleary,et al.  The effect of particle shape on simple shear flows , 2008 .

[6]  Brahmeshwar Mishra,et al.  A DEM Analysis of Flow Characteristics of Noncohesive Particles in Hopper , 2008 .

[7]  Harald Kruggel-Emden,et al.  Applicable Contact Force Models for the Discrete Element Method: The Single Particle Perspective , 2009 .

[8]  A. Di Maio,et al.  Di Maio, A , 2012 .

[9]  Harald Kruggel-Emden,et al.  Review and extension of normal force models for the Discrete Element Method , 2007 .

[10]  C. González-Montellano,et al.  Validation and experimental calibration of 3D discrete element models for the simulation of the discharge flow in silos , 2011 .

[11]  Dawei Zhao,et al.  A fast contact detection algorithm for 3-D discrete element method , 2004 .

[12]  R. Behringer.  Sands, Powders, and Grains: An Introduction to the Physics of Granular Materials , 1999 .

[13]  Jiansheng Xiang,et al.  A clustered overlapping sphere algorithm to represent real particles in discrete element modelling , 2009 .

[14]  R. Kačianauskas,et al.  Investigation of adequacy of multi-sphere approximation of elliptical particles for DEM simulations , 2010 .

[15]  R. Nedderman.  Statics and Kinematics of Granular Materials: Euler's equation and rates of strain , 1992 .

[16]  Harald Kruggel-Emden,et al.  A study on tangential force laws applicable to the discrete element method (DEM) for materials with viscoelastic or plastic behavior , 2008 .

[17]  A. Munjiza,et al.  The modelling of particle systems with real shapes , 2004, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[18]  Mohammad Hossein Abbaspour-Fard,et al.  Shape representation of axi‐symmetrical, non‐spherical particles in discrete element simulation using multi‐element model particles , 1999 .

[19]  P. A. Cundall,et al.  FORMULATION OF A THREE-DIMENSIONAL DISTINCT ELEMENT MODEL - PART I. A SCHEME TO DETECT AND REPRESENT CONTACTS IN A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS , 1988 .

[20]  Peter Eberhard,et al.  Collision detection for complicated polyhedra using the fast multipole method or ray crossing , 2007 .

[21]  Colin Webb,et al.  Experimental validation of polyhedral discrete element model , 2011 .

[22]  Feras Y. Fraige,et al.  Distinct element modelling of cubic particle packing and flow , 2008 .

[23]  Paul W. Cleary,et al.  DEM modelling of industrial granular flows: 3D case studies and the effect of particle shape on hopper discharge , 2002 .

[24]  Harald Kruggel-Emden,et al.  Comparison of the multi-sphere and polyhedral approach to simulate non-spherical particles within the discrete element method: Influence on temporal force evolution for multiple contacts , 2011 .

[25]  Youssef M A Hashash,et al.  Shortest link method for contact detection in discrete element method , 2006 .

[26]  Francesco Paolo Di Maio,et al.  Analytical solution for the problem of frictional-elastic collisions of spherical particles using the linear model , 2004 .

[27]  G. A. Kohring,et al.  Computer simulations of critical, non-stationary granular flow through a hopper , 1995 .

[28]  Shu-San Hsiau,et al.  The simulation and experimental study of granular materials discharged from a silo with the placement of inserts , 2001 .

[29]  Harald Kruggel-Emden,et al.  A study on the validity of the multi-sphere Discrete Element Method , 2008 .

[30]  Harald Kruggel-Emden,et al.  A Numerical Study on the Sensitivity of the Discrete Element Method for Hopper Discharge , 2009 .

[31]  Rui Xiao,et al.  Discrete element method modeling of non-spherical granular flow in rectangular hopper , 2010 .

[32]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .