Discrete element modelling of the in-plane and out-of-plane behaviour of dry-joint masonry wall constructions

This paper aims to improve knowledge on the suitability of the discrete element method (DEM) to simulate the in-plane and out-of-plane behaviour of different in-configuration structural masonry walls constructed with dry joints. The study compares the results obtained from laboratory tests against those predicted using the three-dimensional distinct element 3DEC software. Significant features of the structural behaviour shown by the walls are discussed and conclusions on their ultimate capacity and failure mechanisms are addressed. A key feature of the DEM is the important role that brick discontinuities, i.e. joints, play in the mechanics of masonry. Within DEM, the bricks were modelled as continuum rigid elements while the joints were modelled by line interface elements represented by the Mohr-Coulomb law. The analysis of the results showed that the model developed is capable of representing the crack development and load carrying capacity of masonry structures constructed with dry joints with sufficient accuracy. Moreover, a collection of experimentally verified material parameters is provided to be used by other researchers and engineers and to develop a reliable model to solve engineering challenges worldwide.

[1]  Ali Limam,et al.  Masonry Walls under Membrane or Bending Loading Cases: Experiments and Discrete Element Analysis , 2012 .

[2]  A. Page.  Finite Element Model for Masonry , 1978 .

[3]  P. A. Cundall,et al.  NUMERICAL MODELLING OF DISCONTINUA , 1992 .

[4]  Michael C. Griffith,et al.  Collapse load predictions for masonry walls in bending , 2010 .

[5]  Paulo B. Lourenço,et al.  Dry Joint Stone Masonry Walls Subjected to In-Plane Combined Loading , 2005 .

[6]  V. Sarhosis,et al.  On the stability of colonnade structural systems under static and dynamic loading conditions , 2016, Bulletin of Earthquake Engineering.

[7]  Gianmarco De Felice,et al.  OUT-OF-PLANE SEISMIC RESISTANCE OF MASONRY WALLS , 2001 .

[8]  C. Casapulla,et al.  3D macro and micro-block models for limit analysis of out-of-plane loaded masonry walls with non-associative Coulomb friction , 2014 .

[9]  José V. Lemos,et al.  Numerical study of the seismic behaviour of a part of the Parthenon Pronaos , 2003 .

[10]  Vasilis Sarhosis,et al.  Identification of material parameters for low bond strength masonry , 2014 .

[11]  Mario M. Attard,et al.  Modeling of unreinforced masonry walls under shear and compression , 2007 .

[12]  P. Lourenço.  Computational strategies for masonry structures : Proefschrift , 1996 .

[13]  Konstantinos Daniel Tsavdaridis,et al.  Discrete Element Modelling of Masonry Infilled Steel Frames with Multiple Window Openings Subjected to Lateral Load Variations , 2014 .

[14]  Dina D'Ayala,et al.  Definition of Collapse Mechanisms and Seismic Vulnerability of Historic Masonry Buildings , 2003 .

[15]  Yong Sheng,et al.  Evaluation of different computational modelling strategies for the analysis of low strength masonry structures , 2014 .

[16]  J. Morel,et al.  Modeling rammed earth wall using discrete element method , 2016 .

[17]  M. Wiercigroch,et al.  Hysteretic effects of dry friction: modelling and experimental studies , 2008, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[18]  Sergio Lagomarsino,et al.  The Assessment of Damage Limitation State in the Seismic Analysis of Monumental Buildings , 2009 .

[19]  Paulo B. Lourenço,et al.  Computations on historic masonry structures , 2002 .

[20]  Paul McCombie,et al.  Plane strain numerical model for drystone retaining walls , 2007 .

[21]  Jamshid Ghaboussi,et al.  Three-dimensional discrete element method for granular materials , 1990 .

[22]  A. Munjiza.  The Combined Finite-Discrete Element Method , 2004 .

[23]  A. Limam,et al.  Out-of-plane behaviour of hollow concrete block masonry walls unstrengthened and strengthened with CFRP composite , 2014 .

[24]  Matthew J. DeJong,et al.  Seismic assessment strategies for masonry structures , 2009 .

[25]  N. Cristescu,et al.  On dynamic relaxation , 1967 .

[26]  Giulio Mirabella Roberti,et al.  Discrete element analysis on the Sardinian "Nuraghe" , 2001 .

[27]  Ali Limam,et al.  Characterisation of vibration and damage in masonry structures: experimental and numerical analysis , 2014 .

[28]  Jan G. Rots,et al.  Structural Masonry , 2020 .

[29]  Daniel V. Oliveira,et al.  Experimental and numerical analysis of blocky masonry structures under cyclic loading , 2003 .

[30]  J. Lemos,et al.  Numerical prediction of the earthquake response of classical columns using the distinct element method , 2002 .

[31]  C. Casapulla.  Lower and upper bounds in closed form for out-of-plane strength of masonry structures with frictional resistances , 2008 .

[32]  P. Lourenço,et al.  Multisurface Interface Model for Analysis of Masonry Structures , 1997 .

[33]  Y. Sheng,et al.  Influence of brick–mortar interface on the mechanical behaviour of low bond strength masonry brickwork lintels , 2015 .

[34]  Michael C. Griffith,et al.  Dry Stone Masonry Walls in Bending—Part I: Static Tests , 2014 .

[35]  F. Calvetti,et al.  Distinct element analysis of stone arches , 2020, Arch Bridges.

[36]  Katalin Bagi,et al.  Discrete element analysis of a stone masonry arch , 2009 .

[37]  Paulo B. Lourenço,et al.  The effect of skew angle on the mechanical behaviour of masonry arches , 2014 .

[38]  Jacques Heyman,et al.  Structural Analysis: A Historical Approach , 1998 .

[39]  Amin Mohebkhah,et al.  Nonlinear analysis of masonry-infilled steel frames with openings using discrete element method , 2008 .