Nanostructure and Oxidation Reactivity of Nascent Soot Particles in Ethylene/Pentanol Flames

As byproducts of the combustion process of hydrocarbon fuels, soot particles are difficult to remove, and they can greatly harm human health and pollute the environment. Therefore, the formation and growth processes of the soot particles has become a study focus of researchers. In this paper, the nanostructure and oxidation reactivity of carbonaceous particles collected from ethylene inverse diffusion flames with or without the additions of three pentanol isomers (1-pentanol, 3-methyl-1-butanol, and 2-methyl-1-butanol) were investigated in detail. The nanostructure and oxidation characteristics of nascent soot particles were characterized using high resolution transmission electron microscopy (HRTEM), X-ray diffractometry (XRD) and thermogravimetric analysis (TGA). It was found that the nascent soot cluster of pure ethylene flame had a loose structure, while the additions of pentanol isomers made the soot agglomerates more compact and delayed the growth of graphitic structures. The pentanol isomer additions also contributed to a higher disorder of the crystallite arrangement in the soot nanostructure. According to the TGA experiments, the results showed that the addition of pentanol isomers enhanced the oxidation reactivity of soot particles, which could help to reduce soot particle emissions.

[1]  C. Westbrook,et al.  Chemical kinetic modeling study of the effects of oxygenated hydrocarbons on soot emissions from diesel engines. , 2006, The journal of physical chemistry. A.

[2]  Li Li,et al.  Combustion and emission characteristics of diesel engine fueled with diesel/biodiesel/pentanol fuel blends , 2015 .

[3]  Eric G. Eddings,et al.  Chemical and morphological characterization of soot and soot precursors generated in an inverse diffusion flame with aromatic and aliphatic fuels , 2010 .

[4]  M. P. Dorado,et al.  A comparison of performance of higher alcohols/diesel fuel blends in a diesel engine , 2012 .

[5]  Burak Atakan,et al.  Studies of aromatic hydrocarbon formation mechanisms in flames: Progress towards closing the fuel gap , 2006 .

[6]  R. V. Vander Wal,et al.  Analysis of HRTEM images for carbon nanostructure quantification , 2004 .

[7]  Jiming Hao,et al.  A study on emission characteristics of an EFI engine with ethanol blended gasoline fuels , 2003 .

[8]  Jean-Noël Rouzaud,et al.  Structure–property relationship in nanostructures of young and mature soot in premixed flames , 2009 .

[9]  L. A. Sgro,et al.  On the characterization of nanoparticles emitted from combustion sources related to understanding their effects on health and climate. , 2012, Journal of hazardous materials.

[10]  Randy L. Vander Wal,et al.  A comparison of soot nanostructure obtained using two high resolution transmission electron microscopy image analysis algorithms , 2011 .

[11]  R. L. Wal,et al.  Soot nanostructure: dependence upon synthesis conditions , 2004 .

[12]  Jack B. Howard,et al.  Formation of polycyclic aromatic hydrocarbons and their growth to soot—a review of chemical reaction pathways , 2000 .

[13]  A. Raj,et al.  A PAH growth mechanism and synergistic effect on PAH formation in counterflow diffusion flames , 2013 .

[14]  C. Kefa,et al.  Soot volume fraction and temperature reconstruction model research for asymmetric diffusive C-H flame , 2008 .

[15]  C. McEnally,et al.  Soot formation in methane/air nonpremixed flames doped with small quantities of C3 hydrocarbons , 1998 .

[16]  S. Senkan,et al.  Effect of Oxygen Addition on Polycyclic Aromatic Hydrocarbon Formation in 1,3 Butadiene Counter-Flow Diffusion Flames , 2001 .

[17]  Liangjie Wei,et al.  Effect of n-pentanol addition on the combustion, performance and emission characteristics of a direct-injection diesel engine , 2014 .

[18]  Gholamhassan Najafi,et al.  Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network , 2009 .

[19]  A. Fridman,et al.  Relative effect of acetylene and PAHs addition on soot formation in laminar diffusion flames of methane with oxygen and oxygen-enriched air , 2000 .

[20]  Rajasekhar Balasubramanian,et al.  Influence of butanol addition to diesel–biodiesel blend on engine performance and particulate emissions of a stationary diesel engine , 2014 .

[21]  Henning Bockhorn,et al.  Soot Formation in Combustion: Mechanisms and Models , 1994 .

[22]  Ayhan Demirbas,et al.  Progress and recent trends in biofuels , 2007 .

[23]  Zhen Huang,et al.  Combustion, gaseous and particulate emission of a diesel engine fueled with n-pentanol (C5 alcohol) blended with waste cooking oil biodiesel , 2016 .

[24]  K. Venkateswarlu,et al.  An Experimental Investigation on Performance, Combustion and Emission Characteristics of Diesel- Biodiesel Blends with Isobutanol as an Additive , 2012 .

[25]  Zou Zhi-qiang.  Measurement of graphitization degree of carbon-carbon composites by average X-ray diffraction angle method , 2003 .

[26]  Michael Frenklach,et al.  Reaction mechanism of soot formation in flames , 2002 .

[27]  Hai Wang.  Formation of nascent soot and other condensed-phase materials in flames , 2011 .

[28]  D. Tree,et al.  Soot processes in compression ignition engines , 2007 .

[29]  Dong Liu,et al.  Simultaneous Measurement of Three-Dimensional Soot Temperature and Volume Fraction Fields in Axisymmetric or Asymmetric Small Unconfined Flames With CCD Cameras , 2010 .

[30]  W. Pitz,et al.  Detailed Kinetic Modeling of HCCI Combustion with Isopentanol , 2011 .

[31]  R. Fletcher,et al.  Laser microprobe analysis of soot precursor particles and carbonaceous soot , 1995 .

[32]  Randy L. Vander Wal,et al.  Development of an HRTEM image analysis method to quantify carbon nanostructure , 2011 .

[33]  F. Mondragón,et al.  Chemical characterization of soot precursors and soot particles produced in hexane and diesel surrogates using an inverse diffusion flame burner , 2013 .

[34]  S. M. Sarathy,et al.  Detailed Kinetic Modeling Study of n-Pentanol Oxidation , 2012 .

[35]  S. Saravanan,et al.  Effect of exhaust gas recirculation (EGR) on performance and emissions of a constant speed DI diesel engine fueled with pentanol/diesel blends , 2015 .

[36]  H. Sharon,et al.  Fueling a stationary direct injection diesel engine with diesel-used palm oil–butanol blends – An experimental study , 2013 .

[37]  Dimitrios C. Rakopoulos,et al.  Experimental heat release analysis and emissions of a HSDI diesel engine fueled with ethanol–diesel fuel blends , 2007 .

[38]  Linda G. Blevins,et al.  The existence of young soot in the exhaust of inverse diffusion flames , 2002 .

[39]  C. Kefa,et al.  Simultaneous experimental reconstruction of three-dimensional flame soot temperature and volume fraction distributions , 2011 .

[40]  V. Valvoda,et al.  Analysis of carbon fibers and carbon composites by asymmetric X-ray diffraction technique , 1999 .

[41]  Andrea D’Anna,et al.  Combustion-formed nanoparticles , 2009 .

[42]  Blake A. Simmons,et al.  Characteristics of Isopentanol as a Fuel for HCCI Engines , 2010 .

[43]  C. McEnally,et al.  Species and soot concentration measurements in a methane/air nonpremixed flame doped with C4 hydrocarbons , 1998 .