Design considerations of rectangular electrostatic torsion actuators based on new analytical pull-in expressions

An important design issue of electrostatic torsion actuator is the relative locations of the actuating electrodes, where the bias voltage is applied. These geometrical design parameters affect both the pull-in angle as well as the pull-in voltage. In this paper, a new approximated analytical solution for the pull-in equation of an electrostatic torsion actuator with rectangular plates is derived. The analytical expression is shown to be within 0.1% of the one degree of freedom (1DOF) lumped-element model numerical simulations. Moreover, the analytical expressions are compared with the full coupled-domain finite-elements/boundary-elements (FEM/BEM) simulations provided by MEMCAD4.8 Co-solve tool, showing excellent agreement. The approach presented here provides better physical insight, more rapid simulations and an improved design optimization tool for the actuator.

[1]  P. Zavracky,et al.  Micromechanical switches fabricated using nickel surface micromachining , 1997 .

[2]  Ming C. Wu,et al.  Linearization of electrostatically actuated surface micromachined 2-D optical scanner , 2001 .

[3]  David J. Bishop,et al.  MEMS for Light-Wave Networks , 2001 .

[4]  Raj K. Gupta,et al.  Electrostatic pull-in test structure design for in-situ mechanical property measurements of microelectromechanical systems (MEMS) , 1997 .

[5]  O. Degani,et al.  Pull-in study of an electrostatic torsion microactuator , 1998 .

[6]  Victor M. Bright,et al.  Use of micro-electro-mechanical deformable mirrors to control aberrations in optical systems: theoretical and experimental results , 1997 .

[7]  Yong-Kweon Kim,et al.  Design and fabrication of micromirror supported by electroplated nickel posts , 1996 .

[8]  G. Kino,et al.  Silicon-micromachined scanning confocal optical microscope , 1998 .

[9]  K. R. Farmer,et al.  Extending the travel range of electrostatic micro-mirrors using insulator coated electrodes , 2000, 2000 IEEE/LEOS International Conference on Optical MEMS (Cat. No.00EX399).

[10]  M. Fischer,et al.  Electrostatically deflectable polysilicon micromirrors — dynamic behaviour and comparison with the results from FEM modelling with ANSYS , 1998 .

[11]  S. Senturia.  Microsystem Design , 2000 .

[12]  M K Lee,et al.  Aberration-correction results from a segmented microelectromechanical deformable mirror and a refractive lenslet array. , 1998, Optics letters.

[13]  H. Fujita,et al.  Electrostatic micro torsion mirrors for an optical switch matrix , 1996 .

[14]  P. Sarro,et al.  Electrostatic aluminum micromirrors using double-pass metallization , 1997 .

[15]  Peter M. Osterberg,et al.  Electrostatically actuated microelectromechanical test structures for material property measurement , 1995 .

[16]  V. Aksyuk,et al.  Wavelength add-drop switching using tilting micromirrors , 1999 .