论文信息 - EMI reduction problems in power converters with 6.5 kV IGBTs

EMI reduction problems in power converters with 6.5 kV IGBTs

The main topic of this paper are the EMI reduction problems in high voltage power converters with 6.5 kV IGBTs. The generation process of electromagnetic interference is briefly analyzed and some EMI reduction methods are introduced. Theoretical analysis, calculation and experimental results of choosing the snubber circuit for minimization of parasitic ringing are described. The effect of EMI suppression circuit was also experimentally tested on output rectifier of described power converter.

T. Jalakas | M. Egorov | H. Molder

[1] Miriam Philip,et al. Snubber Circuits : Theory , Design and Application , 2000 .

[2] F. Klotz,et al. Experimental and simulative investigations of conducted EMI performance of IGBTs for 5-10 kVA converters , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[3] M. J. Frazier,et al. Laboratory testing of track signaling system susceptibility to electrical interference , 1996, Proceedings of the 1996 ASME/IEEE Joint Railroad Conference.

[4] G. Joos,et al. Electromagnetic interference issues in the specification of AC and DC propulsion systems for light rail vehicles , 1998, Proceedings of the 1998 ASME/IEEE Joint Railroad Conference.

[5] Bernardo Tellini,et al. Conducted and radiated interference measurements in the line-pantograph system , 2001, IEEE Trans. Instrum. Meas..

[6] C. Marchand,et al. Harmonic analysis method for traction drives EMI studies , 2003 .